Упатство за користење на XCQQ S8L - Издолжена WC школка за биде

1. Вовед

Thank you for choosing the XCQQ S8L-Elongated Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet toilet seat. Please read these instructions thoroughly before installation and retain them for future reference.

Image 1.1: The XCQQ S8L-Elongated Bidet Toilet Seat, featuring a side control panel and a self-cleaning nozzle.

2. Важни безбедносни информации

Please read all safety warnings and instructions carefully to reduce the risk of fire, electric shock, or injury.

• Електрични барања: This unit operates on 120 Volts and requires a 1300-watt power supply. Ensure the electrical outlet is a B-type US style with a ground plug and is GFCI (Ground Fault Circuit Interrupter) protected. Do not use extension cords.
• Водоснабдување: Connect the bidet seat only to a potable cold water supply. Ensure all connections are secure to prevent leaks.
• Ограничување на тежината: The maximum weight capacity for this bidet toilet seat is 280 pounds. Exceeding this limit may cause damage or injury.
• Lid Caution: The toilet seat lid is designed for soft closing and is not intended to support body weight. Avoid sitting or standing on the lid to prevent damage.
• Чистење: Always unplug the unit before cleaning. Use only mild, non-abrasive cleaners.
• Деца и лица со намалени способности: Овој апарат може да го користат деца на возраст од 8 години и повеќе и лица со намалени физички, сетилни или ментални способности или недостаток на искуство и знаење доколку им се дадени надзор или инструкции за користење на апаратот на безбеден начин и ги разбираат вклучените опасности . Децата не смеат да си играат со апаратот. Чистењето и одржувањето на корисникот не смеат да го вршат деца без надзор.

3. Содржина на пакетот

Проверете дали сите компоненти се присутни пред да започнете со инсталацијата:

• XCQQ Bidet Toilet Seat
• 3-way Valve + DMT Pipe (Pre-Installed)
• Плоча за фиксирање
• Mounting Hardware (screws, rubber expansion nuts)
• Упатство за употреба (овој документ)

4. Карактеристики на производот

The XCQQ S8L-Elongated Bidet Toilet Seat offers a range of features designed for enhanced hygiene and comfort:

• Миење со топла вода: Adjustable water temperature with 5 settings, ranging from room temperature to 102°F (39°C).
• Греење на седиштата: Provides warmth with 4 adjustable temperature levels, from room temperature up to 102°F (39°C).
• Фен за топол воздух: Features an efficient air drying system with 5 adjustable temperature settings to reduce toilet paper usage.
• Капак со меко затворање: Спречува удирање и ја намалува бучавата.
• Ноќна светлина: Integrated LED night light for visibility in low-light conditions, with a beep-off mode to avoid disturbance.
• Самочистечка млазница: A stainless steel nozzle that performs self-cleaning before and after each use.
• Лед екран: Real-time display of water temperature, seat temperature, and drying temperature.
• Memory Customized Settings: The unit retains your preferred settings for water pressure, water temperature, drying temperature, nozzle position, and heated toilet seat temperature level (settings may need to be re-memorized after a power outagд)
• Multiple Cleaning Styles: Includes Female Cleaning, Rear Cleaning, Oscillating Cleaning, and Self-Cleaning functions.

Image 4.1: Illustration of the heated toilet seat and warm air drying functions.

Image 4.2: Depiction of the soft-close lid mechanism and the integrated LED night light.

Image 4.3: Visual representation of the various cleaning modes, including female, rear, oscillating, and self-cleaning.

5. Водич за инсталација

Before installation, ensure your toilet is an elongated shape and has an accessible electrical outlet. Refer to Image 5.1 to confirm your toilet size.

Image 5.1: Toilet size confirmation diagram for elongated and round models, highlighting the requirement for an electrical outlet.

Проверка пред инсталацијата:

• Turn off the water supply to your toilet.
• Исплакнете го тоалетот за да го испразните резервоарот.
• Отстранете ја постоечката школка и капакот на тоалетот.

Инсталација чекор-по-чекор:

1. Remove Fixing Plate: Hold down the buckle on the right side of the bidet unit and pull the fixing plate out from the bottom of the unit.
   

   Image 5.2: Removing the fixing plate from the bidet seat.
2. Secure Fixing Plate: Insert the rubber expansion nuts into the toilet holes. Use the metal adjustment sheets and screws to secure the fixing plate onto the toilet bowl.
   

   Image 5.3: Securing the fixing plate to the toilet bowl.

3. Attach Bidet Unit: Push the bidet unit into the secured fixing plate while holding down the buckle until the plate slides completely into the bottom of the unit.
   

   Image 5.4: Attaching the bidet unit to the fixing plate.

4. Поврзете го снабдувањето со вода: Insert the black rubber ring (optional) into the 3-way valve and screw it onto the inlet of the toilet tank. Connect the bidet's water hose to the 3-way valve.
   

   Image 5.5: Connecting the bidet to the toilet's water supply.
5. Враќање на водата и струјата: Open the main water supply valve. Wait 3-5 minutes for the bidet to fill with water. Then, plug the unit into a GFCI-protected electrical outlet.

Initial Power-On and Water Spray Check:

When the power is activated, the LED light will start to blink. The spray bar will automatically extend (without spraying water) and water will flow down the bar into the toilet. This is a system self-check. The blue light will stop blinking in approximately 1 minute automatically.

If the LED light blinks continuously for more than 5 minutes:

1. Unplug the bidet.
2. Исклучете го вентилот за вода.
3. Почекајте 3-5 минути.
4. Plug it back in and do not operate any functions. The blue light should stop blinking in 1 minute.

Image 5.6: Important attention notice for initial power-on and LED light behavior.

6. Операција

The XCQQ S8L-Elongated Bidet Toilet Seat is controlled via a side panel. Familiarize yourself with the buttons and their functions:

Слика 6.1: Детално view of the side control panel, indicating various function buttons.

Функции на контролниот панел:

• Моќност: Го вклучува/исклучува уредот.
• Стоп: Stops any active washing or drying function.
• Спреј: Initiates a general wash.
• Bidet: Initiates a feminine wash.
• Турбо перење: Provides a stronger, more focused wash.
• Сушење: Го активира фенчето за топол воздух.
• Автоматски: Starts an automatic washing and drying cycle with a single touch.
• Светло: Toggles the LED night light on/off.
• Water Pressure / Drying Temp (HI/LO): Adjusts water pressure during wash or air temperature during drying.
• Nozzle Position (FR/BK): Adjusts the nozzle's forward or backward position.
• Температура на водата: Ја прилагодува температурата на водата.
• Температура на седиштето: Ја прилагодува температурата на грејачкото седиште.
• Меморија: Saves current settings for personalized use.

Image 6.2: The LED display provides real-time information, and the 'Auto' button initiates a combined wash and dry cycle.

7. Одржување

Редовно чистење:

• Чистење на млазницата: The stainless steel nozzle performs an automatic self-cleaning cycle before and after each use. For additional cleaning, a manual nozzle cleaning function may be available via the control panel (refer to specific button if present).
• Чистење на единицата: Always unplug the bidet toilet seat from the electrical outlet before cleaning. Use a soft, damp cloth and a mild, non-abrasive household cleaner. Avoid harsh chemicals, abrasive pads, or strong solvents, as these can damage the surface.
• Seat Removal for Cleaning: The bidet seat can be unclipped from the fixing plate for thorough cleaning of the toilet bowl and the underside of the seat. Refer to the installation steps in reverse to remove and reattach the seat.
• Надворешност: Wipe down the exterior surfaces, including the control panel, with a soft, damp крпа.

Долгорочно складирање:

If the unit will not be used for an extended period, especially in cold climates, it is recommended to drain the water from the unit to prevent freezing damage. Consult a qualified plumber if you are unsure how to perform this task.

8 Смена на проблеми

Овој дел се однесува на вообичаени проблеми со кои може да се соочите. Доколку проблемот продолжи, контактирајте ја службата за корисници.

9. Спецификации

10. Гаранција и поддршка

Информации за гаранцијата: Please refer to the product packaging or the official XCQQ website for detailed warranty terms and conditions. Retain your proof of purchase for warranty claims.

Поддршка за корисници: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact XCQQ customer support through the retailer where the product was purchased or visit the official XCQQ brand webсајт.