Упатство за употреба на резервоарот Alphacool Core 100 Aurora D5/VPP со пумпа VPP655 PWM

1. Вовед

This manual provides detailed instructions for the installation, operation, and maintenance of your Alphacool Core 100 Aurora D5/VPP Reservoir with VPP655 PWM Pump. This product is designed for integration into custom PC water cooling loops, offering both efficient fluid circulation and aesthetic lighting.

The Alphacool Core reservoir features an integrated pump top for D5 pumps and includes a VPP655 PWM pump. The reservoir tube is constructed from acrylic, while the D5/VPP pump top and lid are made of acetal. This combination provides a functional and visually appealing design. The unit also incorporates 12 digitally addressable RGB LEDs in the pump top, creating a light tower effect within the acrylic tube.

Image 1.1: The Alphacool Core 100 Aurora D5/VPP Reservoir with VPP655 PWM Pump, showcasing its compact design and integrated pump.

2. Информации за безбедност

• Always disconnect power from your computer before installing or performing maintenance on any water cooling components.
• Ensure all fittings are securely tightened to prevent leaks. Use appropriate tools and avoid over-tightening.
• Use only approved coolants for PC water cooling systems. Mixing incompatible coolants can lead to system damage.
• Perform a leak test with distilled water or a non-conductive fluid before powering on your system with coolant.
• Keep electronic components away from liquids during installation and maintenance.
• Handle the product with care to avoid damage to the acrylic tube or internal components.

3. Содржина на пакетот

Проверете дали сите компоненти наведени подолу се присутни во вашето пакување:

• Alphacool Core 100 Aurora D5/VPP Reservoir with VPP655 PWM Pump (pre-installed)
• Mounting feet for case bottom installation
• 120mm/140mm mounting frames for fan/radiator attachment
• Монтажни завртки и хардвер
• Иглосален клуч (Иглосален клуч)
• Power connection cable (4-pin Molex)
• Digital aRGB LED connection cable (3-pin JST)

Слика 3.1: Готовоview of included mounting hardware, cables, and tools for the Alphacool Core 100 Aurora D5/VPP Reservoir.

4. Поставување и инсталација

4.1 Опции за монтирање

The Alphacool Core 100 Aurora offers versatile mounting options:

1. Case Bottom Mounting: Use the provided feet to secure the reservoir to the bottom of your PC case. Ensure adequate clearance for tubing and connections.
2. Fan/Radiator Mounting: Utilize the included 120mm/140mm mounting frames to attach the reservoir to available fan spaces, directly to radiators, or to fans already mounted on radiators. This allows for flexible placement within your system.

Image 4.1: The reservoir unit shown mounted on a radiator, demonstrating one of the installation possibilities.

4.2 Connecting to the Water Cooling Loop

The reservoir features three G1/4" connection ports. Typically, one port serves as the inlet from the rest of the loop, and another as the outlet to the pump. The third port can be used for filling, draining, or as an additional sensor port.

• Install your G1/4" fittings into the desired inlet and outlet ports. Ensure O-rings are properly seated and fittings are tightened securely by hand, then a quarter turn with a wrench if necessary, to prevent leaks.
• Connect your tubing to the fittings, ensuring a snug and secure fit.

Слика 4.2: напред view of the reservoir, highlighting the G1/4" inlet and outlet ports and the illuminated interior.

4.3 Power and RGB Connections

The VPP655 PWM pump requires a 4-pin Molex power connection. The integrated aRGB LEDs require a 3-pin JST connection.

• Connect the 4-pin Molex connector from the pump to an available 4-pin Molex power cable from your power supply unit (PSU).
• Connect the 3-pin JST connector from the aRGB LEDs to a compatible 3-pin 5V addressable RGB header on your motherboard or an external aRGB controller. Ensure correct polarity to avoid damage.

Image 4.3: Close-up of the 4-pin Molex power connector and the 3-pin JST aRGB connector.

4.4 Filling the Loop and Leak Testing

After all components are installed and connected:

1. Fill the reservoir with your chosen coolant. Do not fill completely; leave some air space for expansion.
2. Perform a leak test. It is highly recommended to use a dedicated PSU for the pump only, or to use a PSU jumper, to power the pump without powering other PC components. Run the pump for at least 24 hours, checking for any leaks.
3. Once leak testing is complete and no leaks are detected, you can power on your full system.

5. Упатства за работа

5.1 Pump Operation (VPP655 PWM)

The VPP655 pump is a PWM (Pulse Width Modulation) controlled pump. This allows for dynamic control of pump speed based on system temperatures or user preferences via your motherboard's fan headers or a dedicated fan controller.

• Connect the 4-pin PWM cable from the pump to a 4-pin fan header on your motherboard (e.g., CPU_FAN, PUMP_FAN).
• Configure the pump speed curve in your motherboard's BIOS/UEFI settings or using motherboard software. The pump operates within a control range of 800-4800 RPM.
• Ensure the pump is always running when the system is powered on to maintain coolant circulation.

Image 5.1: Close-up of the VPP655 PWM pump label, showing model and basic specifications.

5.2 Digital aRGB Lighting

The 12 digitally addressable RGB LEDs in the pump top provide customizable lighting effects.

• Once connected to a compatible 3-pin 5V aRGB header or controller, you can control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) or the software provided with your external aRGB controller.
• Explore various colors, patterns, and synchronization options to match your system's aesthetic.

Image 5.2: The reservoir operating within a PC case, demonstrating the vibrant digitally addressable RGB lighting effects.

6. Одржување

• Замена на течноста за ладење: It is recommended to replace your coolant every 6-12 months, depending on the coolant type and system usage, to prevent buildup and maintain optimal performance.
• Системско чистење: Before adding new coolant, consider flushing your loop with distilled water or a dedicated flushing agent to remove any old coolant residue.
• Чистење: If disassembling for cleaning, gently clean the acrylic tube and acetal components with distilled water and a soft cloth. Avoid abrasive materials or harsh chemicals.
• Инспекција на пумпата: Periodically inspect the pump for any unusual noises or reduced flow. If issues arise, refer to the troubleshooting section.

7 Смена на проблеми

8. Спецификации

Image 8.1: Dimensional drawing showing the length, width, and height of the Alphacool Core 100 Aurora D5/VPP Reservoir.

9. Гаранција и поддршка

Alphacool products are manufactured to high quality standards. For warranty information and technical support, please refer to the official Alphacool webлокација или контактирајте го вашиот продавач. Зачувајте го доказот за купување за гаранциски барања.

За понатамошна помош, посетете ја Алфакул webсајт.