Mesqool Projection Alarm Clock

Вовед

Thank you for choosing the Mesqool Projection Alarm Clock. This device combines a digital alarm clock with a time projector, night light, and environmental sensors to enhance your daily routine. Please read this manual carefully to ensure proper setup and operation.

Фронт view of the Mesqool Projection Alarm Clock, showcasing its large LED display with time, date, temperature, and humidity. The projection feature is also visible, casting the time onto a surface.

Клучни карактеристики

• Проекција на таванот: Projects time onto your wall or ceiling with a 350° swivel projector and adjustable focus ring.
• Large Multi-function Display: 5.9'' LED screen shows 12/24 hour time, calendar date, day of the week, alarm times, indoor temperature, and humidity.
• Двојни аларми: Set two independent alarms with customizable modes (Mon-Sun, Mon-Fri, Sat-Sun, One-time) and a 9-minute snooze function.
• Прилагодлива јачина на аларм: 7-level adjustable beep alarm for heavy sleepers.
• Ноќна светлина: Built-in soft LED night light at the bottom with two brightness settings.
• Затемнувач на екранот: 5-level adjustable brightness for both the LED display and time projection.
• USB порти за полнење: Includes USB-A and USB-C ports for charging external devices.
• Резервна копија на батеријата: Ги задржува поставките за време и аларм за време на исклучување на струјатаtages (requires 2x AAA batteries, not included).

An illustrative image detailing the primary functions of the alarm clock, including dual alarms, calendar, 12/24H time format, temperature, humidity, and night light.

Содржина на пакетот

• Mesqool Projection Alarm Clock Unit
• Адаптер за напојување
• Упатство за употреба
• Wireless Outdoor Sensor (for temperature and humidity readings, as shown in seller videos for similar products)

Поставување

Напојување на уредот

The alarm clock is primarily powered by the included AC adapter. For backup during power outages, install 2 AAA batteries (not included) into the battery compartment located on the bottom of the unit. The battery backup will maintain time and alarm settings but will not power the display or projection.

Почетно поставување на време и датум

Upon first power-up or after a full power loss without battery backup, the clock may require manual time and date setting. Refer to the 'Operating Instructions' section for detailed steps on setting time, date, and 12/24H format.

The back of the alarm clock, revealing the battery compartment for backup power and the USB-A and USB-C ports for charging external devices.

Wireless Sensor Setup (if applicable)

If your model includes a wireless outdoor sensor, install batteries into the sensor unit and place it outdoors in a shaded, dry location. The clock will automatically connect to the sensor to display outdoor temperature and humidity.

Упатства за работа

Поставување време и датум

1. Press and hold the 'SET TIME' button to enter time setting mode. The hour digits will flash.
2. Користете ги копчињата „+“ или „-“ за да го прилагодите часот.
3. Press 'SET TIME' again to set minutes. Use '+' or '-' to adjust.
4. Continue pressing 'SET TIME' to cycle through setting year, month, and day, adjusting each with '+' or '-'.
5. Press 'SET TIME' one last time or wait 10 seconds for settings to save.
6. За да префрлате помеѓу 12-часовен и 24-часовен формат, притиснете го копчето „12/24H“.
7. To activate/deactivate Daylight Saving Time (DST), press the 'DST' button.

Поставување аларми

1. Press and hold 'ALARM 1' or 'ALARM 2' button to set the respective alarm. The hour digits will flash.
2. Use '+' or '-' buttons to adjust the hour. Press the alarm button again to set minutes.
3. After setting minutes, press the alarm button again to select alarm mode (Mon-Sun, Mon-Fri, Sat-Sun, One-time).
4. Press the alarm button again to set the alarm volume (7 levels).
5. To activate/deactivate an alarm, short press 'ALARM 1' or 'ALARM 2'. An alarm icon will appear/disappear on the display.
6. When an alarm sounds, press 'SNOOZE/OK' for a 9-minute snooze. To turn off the alarm, press any other button.

This image illustrates the alarm clock's customizable features, including 7 adjustable volume levels for the alarm and 4 distinct alarm modes (Mon-Sun, Mon-Fri, Sat-Sun, One-time) to suit various schedules.

Временска проекција

1. Adjust the projector arm (located on the side) to direct the time onto your desired surface (wall or ceiling). The arm swivels 350°.
2. Ротирајте го прстенот за фокусирање на објективот на проекторот за да постигнете јасна слика.
3. To flip the projected image 180° (useful if the clock is placed in a way that projects upside down), press the 'PROJECTION ON/FLIP/OFF' button.
4. To turn the projection on/off, press and hold the 'PROJECTION ON/FLIP/OFF' button.

The alarm clock projecting clear blue digital time onto a wall, showcasing an alternative color option for the projection.

Display and Projection Brightness

The clock features a 5-level dimmer for both the main LED display and the projected time. Press the 'DIMMER' button repeatedly to cycle through the brightness levels (L1 to L5, with L5 being brightest).

A visual representation of the clock's 5-level adjustable dimmer, showing how the display brightness can be customized from bright to dim for optimal comfort, especially during nighttime.

Функција за ноќно светло

The soft LED night light is located at the bottom of the clock. Short press the 'SNOOZE/OK' button to cycle through its brightness settings (Off, Medium, Full).

The alarm clock featuring its built-in soft LED night light at the bottom, offering adjustable brightness settings (Off, Medium, Full) to create a comfortable ambiance.

USB порти за полнење

The back of the clock includes a USB-A and a USB-C port. These ports can be used to charge your smartphone, tablet, or other USB-powered devices. Ensure the clock is connected to AC power for charging functionality.

Приказ на температура и влажност

The clock displays both indoor temperature and humidity. If a wireless outdoor sensor is connected, it will also show outdoor temperature and humidity readings.

Одржување

To maintain your Mesqool Projection Alarm Clock, wipe the unit with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the surface. Keep the device away from direct sunlight, extreme temperatures, and moisture.

Решавање проблеми

Спецификации

Гаранција и поддршка

Mesqool products are designed for reliability and performance. For any questions, technical support, or warranty claims, please contact our customer service team. We are committed to providing excellent support for your product.

Е-пошта за услуги на клиентите: support-us@mesqool.com