1. Поставување и почетна подготовка
1.1 Отпакување
Carefully remove all components from the packaging. Inspect for any damage that may have occurred during transit. Keep all packaging materials for future transport or storage.
1.2 Идентификација на компоненти
Familiarize yourself with the main components of both the 3D printer and the wash & cure station:
- ELEGOO Saturn 3 Ultra 3D Printer: Printer base, resin vat, build plate, cover, power adapter, USB drive, tools.
- ELEGOO Mercury X Wash & Cure Station: Base unit, washing bucket, curing platform, power adapter.
1.3 Склопување на печатачот
Place the printer on a stable, level surface. Ensure adequate ventilation in the operating area.
- Инсталирајте ја Build Plate: Attach the build plate to the Z-axis arm and tighten the securing knob.
- Израмнување: Loosen the screws on the build plate. Lower the build plate until it touches the LCD screen. Tighten the screws. This ensures proper adhesion for prints.
- Инсталирајте смолен сад: Place the resin vat onto the LCD screen and secure it with the side clamps.
Image: The ELEGOO Saturn 3 Ultra 3D Printer shown next to a large, detailed 3D printed model, illustrating its printing capabilities.
1.4 Wash and Cure Station Setup
Place the Mercury X station on a stable surface. Connect the power adapter. The station is ready for use once powered on.
2. Водич за работа
2.1 ELEGOO Saturn 3 Ultra 3D Printer
2.1.1 Preparing for Print
- Resin Pouring: Внимателно истурете ја саканата смола во садот за смола, осигурувајќи се дека не ја надминува линијата за максимално полнење.
- File Трансфер: Transfer your sliced 3D model file (.STL format) to the printer via USB drive or Wi-Fi. The printer supports 2.4G and 5G networks for convenient file transfer at 6-10Mbps.
Image: A user is shown transferring a 3D model file wirelessly from a laptop to the ELEGOO Saturn 3 Ultra 3D Printer, highlighting the convenient Wi-Fi transfer feature.
2.1.2 Започнување со печатење
Изберете го вашиот модел file from the printer's touchscreen interface and initiate the print. Monitor the initial layers to ensure proper adhesion.
2.1.3 По печатење
Once the print is complete, carefully remove the build plate. Use the provided scraper to detach the printed model. Clean any excess resin from the build plate before proceeding to washing.
2.2 ELEGOO Mercury X Wash and Cure Station
2.2.1 Постапка за перење
- Наполнете ја кофата: Fill the washing bucket with appropriate cleaning solution (e.g., isopropyl alcohol).
- Place Print: Place the printed model into the washing basket or attach the build plate directly to the washing platform.
- Започнете со перење: Select the wash function and set the desired time. The station will agitate the solution to clean the model.
Image: The ELEGOO Mercury X Wash Station is shown with a 3D printed model submerged in cleaning solution, indicating the washing process.
2.2.2 Curing Procedure
- Dry Model: Ensure the washed model is dry before curing.
- Place on Platform: Place the model on the rotating curing platform.
- Start Cure: Select the cure function and set the desired time. The UV lamps will harden the resin model evenly with 360° timed exposure.
Image: The ELEGOO Mercury X Cure Station is shown with a 3D printed model on its rotating platform, illuminated by UV lights for post-curing.
3. Одржување
3.1 Printer Maintenance
- Resin Vat Cleaning: After each print, filter unused resin back into its bottle. Clean the resin vat and FEP film with a soft cloth and isopropyl alcohol.
- Чистење на плочата за градење: Clean the build plate with isopropyl alcohol after each use.
- LCD екран: Keep the LCD screen clean and free of resin spills. Use a soft, lint-free cloth for cleaning.
3.2 Wash and Cure Station Maintenance
- Раствор за чистење: Replace the cleaning solution in the washing bucket regularly, especially when it becomes cloudy or heavily contaminated.
- Чистење на станицата: Wipe down the exterior of the station with a damp cloth to remove any resin residue.
4 Смена на проблеми
Овој дел се однесува на вообичаени проблеми со кои може да се соочите:
- Печатот не се лепи на плочата за градење: Ensure the build plate is properly leveled. Increase bottom exposure time in your slicer settings. Check ambient temperature.
- Failed Prints/Partial Prints: Verify resin settings (exposure time, lift speed). Check FEP film for damage or cloudiness. Ensure resin is well-mixed.
- Проблеми со поврзување (Wi-Fi): Confirm the printer is connected to a compatible 2.4G or 5G network. Check network signal strength.
- Wash Station Not Agitating: Ensure the washing bucket is correctly seated and the power is connected.
- Лекување на Лamps Not Activating: Check power connection. Ensure the cover is properly closed (if applicable for safety interlock).
5. Технички спецификации
| Карактеристика | Спецификација |
|---|---|
| Бренд | ЕЛЕГОО |
| Product Dimensions (Printer) | 20 x 10 x 10 инчи (20"Д x 10"Ш x 10"В) |
| Материјал | Смола |
| Компатибилни уреди | Лаптоп, паметен телефон |
| Поддржано File Формат | STL |
| Производител | ЕЛЕГОО |
| Прво достапно | 18 септември 2023 година |
Image: A graphic detailing the ELEGOO Saturn 3 Ultra's 10-inch 12K Mono LCD with 11520x5120 resolution and 19x24µm XY resolution, emphasizing incredible clarity and precision.
Image: A diagram illustrating the build volume of the ELEGOO Saturn 3 Ultra, showing dimensions of 218.88mm (L) x 122.88mm (M) x 260mm (H), or 8.62x4.84x10.24 inches.
Image: A close-up of a circuit board with a chip labeled 'Linux OS' and '4G RAM', representing the stable file transfer and faster running speed of the ELEGOO Saturn 3 Ultra.
6. Гаранција и поддршка
For warranty information, technical support, or service inquiries, please refer to the official ELEGOO webстраница или директно контактирајте ја службата за корисници на ELEGOO. Зачувајте ја сметката како доказ за купување.
