Упатство за користење на Algo 8201 PoE SIP IP интерфон/домофон

1. Вовед

The Algo 8201 is a Power over Ethernet (PoE) IP intercom designed for hands-free two-way voice communication. It is suitable for interior and exterior secured entrances, access points, classrooms, and offices. This device integrates door opening control, allowing activation of entry into a secure location via telephone keypad. The 8201 registers as a third-party SIP endpoint within a hosted or premise Unified Communications (UC) environment. It is a compact, one-piece PoE solution, offering an alternative to the Algo 8028 SIP Doorphone. The intercom can be surface or flush mounted and is designed to fit a standard double gang electrical box. Its robust construction, including a stainless steel faceplate, conformal coated electronics, and a tactile backlit call button, ensures complete weather protection and long-term durability in various climates.

2. Клучни карактеристики

• Indoor / Outdoor Weather-resistant SIP-based intercom with integrated relay.
• Network managed and supervised SIP endpoint; Supports PoE.
• Wideband G.722 codec support provides optimum speech clarity and intelligibility.
• Configurable via GUI web Interface or provisioning system.
• Integrated relay for door opening control; supports optional Algo 8063 enhanced controller security (not included, sold separately).

3. Информации за безбедност

Please read all instructions carefully before installation and operation.

• Извор на енергија: The Algo 8201 requires Power over Ethernet (PoE) for operation. Do not attempt to connect direct power. If PoE is not available, a PoE Injector must be used.
• Инсталација: Installation should be performed by qualified personnel familiar with network infrastructure and Voice over IP (VoIP) devices. Ensure all local electrical codes and regulations are followed.
• Животна средина: While designed for indoor/outdoor use and weather resistance, avoid submerging the device in water or exposing it to extreme conditions beyond its specified operating range.
• Одржување: Не обидувајте се сами да го отворите или поправите уредот. Сите сервиси обратете се кај квалификуван сервисер.

4. Поставување и инсталација

The Algo 8201 can be installed using either surface mount or flush mount methods, fitting a standard double gang electrical box. The installer should be familiar with the configuration and programming of Voice over IP devices via a web-базиран графички кориснички интерфејс.

4.1 Производ надview

4.2 Димензии

4.3 Опции за монтирање

The Algo 8201 supports both surface mount and flush mount installations. Refer to the diagrams below for component breakdown and assembly instructions.

4.4 Мрежна врска и напојување

The Algo 8201 is powered exclusively by Power over Ethernet (PoE). Connect a standard Ethernet cable from a PoE-enabled switch or a PoE injector to the RJ45 port on the back of the device. The device will power on automatically.

For initial configuration, access the device's web-based graphical user interface (GUI) via its IP address. The IP address can typically be discovered using network scanning tools or by checking your DHCP server logs.

4.5 Relay Port Connection

The integrated relay port allows for door opening control. It can also be connected to Algo 1127 or 1128 strobes or used to trigger remote Algo SIP Ringers & Strobes over the network.

5. Упатства за работа

5.1 Упатување повик

To initiate a call, press the tactile backlit call button on the front of the intercom. The device will dial the pre-configured SIP extension or number.

5.2 Двонасочна комуникација

Once a call is established, the Algo 8201 provides hands-free two-way voice communication. Speak clearly towards the device.

5.3 Door Opening Control

If configured, the integrated relay allows for door opening control. During an active call, the recipient can activate the door strike or access control system by entering a specific code on their telephone keypad. Consult your system administrator for the correct code.

6. Одржување

The Algo 8201 is designed for long life and minimal maintenance due to its durable construction, including a stainless steel faceplate and conformal coated electronics.

• Чистење: Користете мека, гamp cloth to clean the exterior of the device. Avoid abrasive cleaners or solvents.
• Ажурирања на фирмверот: Периодично проверувајте ги упатствата на производителот website for new features and required firmware updates to ensure optimal performance and security.
• Инспекција: For outdoor installations, periodically inspect the device and its mounting for any signs of wear or damage, especially after severe weather conditions.

7 Смена на проблеми

This section provides basic troubleshooting steps. For more complex issues, refer to the manufacturer's support resources.

• Уредот не се вклучува:
  • Ensure the Ethernet cable is securely connected to a PoE-enabled port or a PoE injector.
  • Verify that the PoE source is active and providing power.
• No Dial Tone or Call Issues:
  • Check network connectivity.
  • Verify SIP registration status via the device's web интерфејс.
  • Ensure the configured SIP account details (username, password, server address) are correct.
  • Confirm that the destination number is correctly programmed.
• Door Relay Not Activating:
  • Verify the physical wiring of the relay port.
  • Ensure the correct DTMF code is being sent from the receiving phone.
  • Check the relay configuration in the device's web интерфејс.
• Проблеми со квалитетот на звукот:
  • Check for network congestion or packet loss.
  • Ensure the microphone and speaker grilles are clear of obstructions.

8. Спецификации

9. Гаранција и поддршка

For detailed warranty information, technical support, and the latest firmware updates, please visit the official Algo Communications Products Ltd. webсајт.

Производител: Алго
Webсајт: www.algosolutions.com