Упатство за користење на PRAMAC S8000 трифазен DPP AVR генератор

1. Вовед

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your PRAMAC S8000 Three-Phase DPP AVR Generator. Please read this manual thoroughly before operating the generator to ensure proper use and to prevent injury or damage.

The PRAMAC S8000 is a versatile single-phase/three-phase generator, delivering up to 6.6 kW of power. It features a reliable Honda gasoline engine (GX.390) and an AVR (Automatic Voltage Regulator) system for stable power output, making it suitable for various outdoor applications, including small construction sites and artisanal work.

2. Информации за безбедност

Секогаш давајте приоритет на безбедноста при ракување со генераторот. Непочитувањето на безбедносните упатства може да резултира со сериозни повреди или смрт.

• Опасност од јаглерод моноксид: Never operate the generator indoors or in enclosed spaces. Generators produce carbon monoxide, a colorless, odorless, poisonous gas.
• Опасност од електричен удар: Do not operate the generator in wet conditions. Ensure all connections are secure and properly grounded.
• Опасност од пожар: Fuel is highly flammable. Refuel in a well-ventilated area with the engine off and cool. Do not smoke near the generator.
• Топли површини: Моторот и пригушувачот стануваат многу жешки за време на работата. Избегнувајте контакт за да спречите изгореници.
• Заштити: The generator is equipped with built-in safety features including thermal protections, differential protection, a waterproof switch cover, a 10A fuse (12V DC), and an Oil Guard (low oil level shutdown). Do not bypass these safety features.
• Држете ги децата и домашните миленици подалеку од генераторот за време на работата.
• Носете соодветна лична заштитна опрема (ЛЗО) како што се ракавици и заштита за очи.

3. Компоненти и контроли

Слика 3.1: Готовоview of the PRAMAC S8000 Generator. This image shows the generator's robust frame, the yellow side panel with the PRAMAC logo, the black fuel tank on top, and the control panel on the left side with various sockets and switches. The red engine component is visible below the control panel, and a wheel is visible on the right side.

3.1 Контролен панел

The control panel provides access to all necessary operational controls and indicators.

• Почетен клуч: Positions for OFF - ON - START.
• Air Control Button: Used for managing air intake during starting.
• Конектор: Provision for remote control accessories (AMF automatic frame, RSS radio remote control).
• Инструменти:
  • Voltmeter: Displays output voltage.
  • Frequency Meter: Displays output frequency (50 Hz).
  • Hour Meter: Tracks total operating hours.
  • Fuel Level Indicator: Shows the current fuel level.
• Заштити:
  • Термичка заштита
  • Диференцијална заштита
  • Waterproof Switch Cover
  • Fuse 10 A (12 V DC)
  • Oil Guard (low oil level shutdown)

3.2 Sockets and Outputs

• N.1 Schuko 230 V 16 A IP54
• N.1 2P+T CEE 230V 16A IP44
• N.1 3P+N+T CEE 400V 16A IP44
• 12 V DC Battery Charger Output

4. Поставување

1. Отпакување: Внимателно извадете го генераторот од пакувањето. Проверете дали има оштетувања при транспортот.
2. Поставување: Place the generator on a firm, level surface in a well-ventilated outdoor area, away from windows, doors, and vents. Ensure at least 1 meter of clear space around the generator.
3. Додадете моторно масло: Before first use, fill the engine crankcase with the recommended type and amount of engine oil. Refer to the engine manual for specific oil requirements. The Oil Guard system will prevent the engine from starting if oil is too low.
4. Додадете гориво: Fill the fuel tank with fresh, unleaded gasoline. Do not overfill. Ensure the fuel cap is securely tightened.
5. Заземјување: Properly ground the generator according to local electrical codes.

5. Упатства за работа

5.1 Стартување на генераторот

The PRAMAC S8000 supports both electric start and manual recoil start.

Електричен старт:

1. Осигурајте се дека сите електрични оптоварувања се исклучени од генераторот.
2. Turn the start key to the "ON" position.
3. If the engine is cold, engage the choke (if applicable, refer to engine manual).
4. Turn the start key to the "START" position and hold until the engine starts. Release the key once the engine runs.
5. Once the engine is running smoothly, disengage the choke.

Manual Recoil Start:

1. Осигурајте се дека сите електрични оптоварувања се исклучени од генераторот.
2. Turn the start key to the "ON" position.
3. Ако моторот е ладен, вклучете го задушувачот.
4. Grasp the recoil starter handle firmly and pull it slowly until you feel resistance, then pull quickly and smoothly to start the engine.
5. Repeat if necessary. Once the engine is running smoothly, disengage the choke.

5.2 Поврзување на електрични оптоварувања

Once the generator is running and stable, you can connect your electrical devices. Ensure the total load does not exceed the generator's continuous operating power (5.6 kW for three-phase, 2.96 kW for single-phase).

• Connect appliances one at a time, starting with the largest load.
• Monitor the voltmeter and frequency meter to ensure stable output.

5.3 Запирање на генераторот

1. Исклучете ги сите електрични оптоварувања од генераторот.
2. Оставете го генераторот да работи неколку минути без оптоварување за да се олади.
3. Turn the start key to the "OFF" position.
4. Turn off the fuel valve (if applicable, refer to engine manual).

6. Одржување

Regular maintenance is crucial for the longevity and reliable operation of your generator. Refer to the engine manufacturer's manual for detailed maintenance schedules.

• Моторно масло: Check oil level before each use. Change oil regularly as per engine manual recommendations.
• Филтер за воздух: Редовно проверувајте и чистете го филтерот за воздух. Заменете го доколку е оштетен.
• Свеќица: Периодично проверувајте и чистете ја свеќичката. Заменете ја ако е истрошена.
• Систем за гориво: Use fresh fuel. For long-term storage, drain the fuel tank and carburetor, or use a fuel stabilizer.
• Чистење: Keep the generator clean and free of debris. Do not use water to clean the electrical components.
• Складирање: Store the generator in a clean, dry place.

7 Смена на проблеми

For problems not listed or if solutions do not resolve the issue, contact a qualified service technician.

8. Спецификации

9. Гаранција и поддршка

Specific warranty information for the PRAMAC S8000 generator is not provided in this manual. For details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact the manufacturer, PRAMAC, or your authorized dealer.

For technical support, spare parts, or service inquiries, please contact the seller or an authorized PRAMAC service center. Always provide your model number (S8000 / PD652TH2Z05) and serial number when seeking support.