First Alert SMICO100-AC Interconnect Hardwire Combination Smoke & Carbon Monoxide Alarm

Вовед

The First Alert SMICO100-AC is an Interconnect Hardwire 2-in-1 Smoke & Carbon Monoxide Alarm with Battery Backup. It incorporates Precision Detection technology, designed to reduce nuisance alarms from cooking while providing early warning for fire and carbon monoxide hazards. This alarm is designed for easy installation and interconnection with compatible alarms, creating a comprehensive safety system throughout your home.

Image: First Alert - Most Trusted Brand in Fire Safety.

Информации за безбедност

ПРЕДУПРЕДУВАЊЕ! Carbon monoxide cannot be seen or smelled but can kill you. If the alarm sounds, follow these steps:

1. Ракувајте со копчето Тест/Тишина.
2. Повикајте ги службите за итни случаи (Противпожарна служба или 911).
3. Immediately move to fresh air - outdoors or by an open door/window.

ВАЖНО! This smoke alarm contains a maximum of 1.0 microcuries (37kBq) of Americium 241, a radioactive material. Distributed under U.S. NRC License No. 13-23889-01E and is made in compliance with U.S. NRC safety criteria in 10CFR32.27. The purchaser is exempt from any regulatory requirements.

Препорачано поставување

Install alarms on every level of your home and in every bedroom to ensure optimal protection. Proper placement is crucial for early detection of smoke and carbon monoxide.

Image: Recommended placement diagram for smoke and CO alarms.

Image: Install alarms on every level and in every bedroom.

Поставување и инсталација

The SMICO100-AC alarm is designed for hardwired installation and includes a 9V battery backup. It features a Quick Connect Plug for simplified wiring.

Пред инсталацијата:

• Ensure power is OFF at the circuit breaker for the circuit you will be working on.
• Familiarize yourself with local electrical codes and installation requirements.

Чекори за инсталација:

1. Remove Old Alarm: Исклучете го стариот аларм од неговиот кабелски сноп и држачот за монтирање.
2. Wire New Harness: If your existing wiring harness is not compatible, use the new Quick Connect Plug provided. Connect the black wire to the hot wire, white to neutral, and orange to the interconnect wire (if applicable). Ensure all connections are secure with wire nuts.
3. Држач за монтирање: Attach the new mounting bracket to the electrical box on the ceiling or wall. The bracket is designed to accommodate various screw arrangements.
4. Connect Alarm: Plug the wiring harness into the back of the SMICO100-AC alarm.
5. Инсталирајте ја батеријата: The alarm comes with a pre-installed 9V Duracell battery. Remove the plastic tab to activate it.
6. Безбеден аларм: Порамнете го алармот со држачот за монтирање и завртете го во насока на стрелките на часовникот додека не се заклучи безбедно на своето место.
7. Вратете ја моќноста: Вклучете го напојувањето на прекинувачот.
8. Тест аларм: Press and hold the Test/Silence button until the alarm sounds. Refer to the 'Operating Instructions' section for expected alarm patterns.

Слика: Назад view of the alarm with wiring harness.

Image: Quick Connect Plug for easy installation.

Упатства за работа

The SMICO100-AC alarm provides distinct audible signals for smoke and carbon monoxide detection, as well as for low battery, malfunction, and end-of-life conditions.

Копче за тестирање/тишина:

Press and hold the Test/Silence button to test the alarm's functionality. The alarm will sound if working correctly. This button can also be used to temporarily silence nuisance alarms.

Image: Hand pressing the Test/Silence button.

Alarm Guide:

• 3 звучни сигнали: Аларм за чад
• 4 звучни сигнали: Аларм за јаглерод моноксид (СО)
• 1 "Chirp" every Minute: Low Battery - Replace Battery
• 3 "Chirps" every Minute: Malfunction - Replace Alarm
• 5 "Chirps" every Minute: End of Life - Replace Alarm

Одржување

Regular maintenance ensures the continued reliability of your alarm. Gently vacuum or use clean compressed air to remove accumulated dust monthly. Never use water, cleaners, or solvents, as these may damage the unit. Press the test button after installation, weekly, and after cleaning to check all alarm functions.

Распоред за замена:

Replace the alarm at least every 10 years after installation to ensure optimal performance and safety.

Image: Test alarms regularly.

Image: Replace alarms at least every 10 years.

Решавање проблеми

If your alarm is chirping or sounding unexpectedly, refer to the Alarm Guide in the 'Operating Instructions' section to identify the specific issue. Common issues and their resolutions include:

• Nuisance Alarms (Cooking Smoke): The SMICO100-AC features Precision Detection technology to minimize nuisance alarms. If an alarm sounds due to cooking, use the Test/Silence button to temporarily silence it. Ensure proper ventilation in cooking areas.
• Слаба батерија: A single chirp every minute indicates a low battery. Replace the 9V battery immediately.
• Неисправност: Three chirps every minute indicate a malfunction. The alarm unit needs to be replaced.
• Крај на живот: Five chirps every minute indicate the alarm has reached its end of life and needs to be replaced.

Спецификации

Гаранција и поддршка

For detailed warranty information and user manuals, please refer to the official First Alert webсајт или контактирајте со поддршката за корисници.

• Тим за услуги на клиентите: 1-800-323-9005
• Webсајт: firstalert.com