multicomp PRO MP780994

TDR Cable Tester User Manual

Модел: MP780994

Бренд: multicomp PRO

Вовед

This manual provides detailed instructions for the operation, maintenance, and troubleshooting of the multicomp PRO MP780994 TDR Cable Tester. This handheld device is designed for detecting and diagnosing wiring conditions of twisted pair and coaxial cables, identifying network service issues, and verifying Power over Ethernet (PoE) standards.

The MP780994 is an essential tool for network communication maintenance, engineering, and wiring projects, offering accurate measurements and clear display of wiremap, cable length, and open-circuit locations.

Производот завршиview

multicomp PRO MP780994 TDR Cable Tester and Wire Tracker Receiver

Figure 1: The multicomp PRO MP780994 TDR Cable Tester (left) and its accompanying Wire Tracker Receiver (right). The main unit features an LCD display for readings, control buttons for navigation and testing, and a rotary dial. The receiver unit has an NCV sensor, volume control, and LED indicators for wire tracking.

The MP780994 kit includes the main TDR Cable Tester unit and a Wire Tracker Receiver. Key features include:

  • TDR supported (no blind area)
  • High resolution (about 0.3m)
  • Compatibility with various types of cables (CAT 5E, CAT 6, CAT 6A, CAT 8, coaxial)
  • Широк опсег на мерење
  • Заштита на влезот
  • Функција за автоматско исклучување

Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

  • 1 x TDR Cable Tester (Main Unit)
  • 1 x приемник за следење на жици
  • Батерии (претходно инсталирани или вклучени одделно)
  • Упатство за употреба (овој документ)

Информации за безбедност

Секогаш почитувајте ги следниве безбедносни мерки за да спречите повреда или оштетување на уредот:

  • Не обидувајте се да го отворите или модифицирате уредот.
  • Не го изложувајте уредот на влага или екстремни температури.
  • Обезбедете правилна инсталација и отстранување на батериите.
  • Avoid testing live circuits unless specifically designed for such purpose and appropriate safety measures are in place. This device is primarily for unpowered cable testing.

Поставување

Инсталација на батерија

The MP780994 TDR Cable Tester and Wire Tracker Receiver require batteries for operation. Refer to the battery compartment on the back of each unit for correct polarity. Use only the specified battery type.

Почетно вклучување

Press and hold the power button (usually marked with a power symbol) on both the main unit and the receiver to turn them on. The main unit's LCD screen should illuminate.

Упатства за работа

Basic Cable Testing (Wiremap)

  1. Connect one end of the cable to be tested to the "PORT" input on the main TDR unit.
  2. Connect the other end of the cable to the corresponding port on the Wire Tracker Receiver.
  3. Select the "TEST" mode on the main unit.
  4. The display will show the wiremap, indicating continuity, open circuits, short circuits, split pairs, or miswires.

Cable Length Measurement (TDR)

  1. Ensure the cable is disconnected from any network devices.
  2. Connect one end of the cable to the "PORT" input on the main TDR unit. Leave the other end open.
  3. Select the "SCAN" mode or TDR function.
  4. The display will show the cable length in feet or meters. Use the "ft/m" button to toggle units.
  5. The TDR function can also locate the distance to faults like open or short circuits.

PoE Detection

  1. Connect the cable from the PoE source to the "POE" input on the main TDR unit.
  2. Select the "POE" mode.
  3. The display will indicate if PoE is present and identify the PoE standard (802.3AF, 802.3AT, 802.3BT).

Wire Tracking (with Receiver)

  1. Connect the cable to be traced to the main TDR unit.
  2. Activate the "SCAN" or tone generation function on the main unit.
  3. Use the Wire Tracker Receiver to follow the cable path. The receiver will emit an audible tone and/or illuminate LEDs when near the cable carrying the signal.
  4. Adjust the sensitivity on the receiver using the rotary dial for optimal tracing.

Одржување

Чистење

Избришете го уредот со мека, сува крпа. Не користете абразивни средства за чистење или растворувачи.

Складирање

Чувајте го уредот на ладно и суво место, подалеку од директна сончева светлина и екстремни температури. Доколку го чувате подолго време, извадете ги батериите за да спречите истекување.

Замена на батеријата

Replace batteries when the low battery indicator appears on the display. Dispose of old batteries according to local regulations.

Решавање проблеми

ПроблемМожна причинаРешение
Уредот не се вклучува.Мртви или неправилно инсталирани батерии.Заменете ги батериите или проверете ја точната поларност.
Inaccurate cable length readings.Incorrect NVP (Nominal Velocity of Propagation) setting; cable not fully disconnected.Adjust NVP setting according to cable type; ensure cable is open-ended for TDR measurement.
Wiremap shows errors (e.g., open, short).Actual cable fault; poor connection.Inspect cable for damage; re-seat connectors firmly.
Нема откривање на PoE.No PoE supply on the line; incorrect port used.Verify PoE source; ensure cable is connected to the dedicated PoE port on the tester.

Спецификации

КарактеристикаДетал
Број на моделMP780994
Брендmulticomp PRO
Тип на мерењеTime Domain Reflectometer (TDR)
Поддржани каблиCopper cables (CAT 5E, CAT 6, CAT 6A, CAT 8), Coaxial cable
ФункцииWiremap, Cable Length, Open-circuit location, Short-circuit detection, Split pair, Miswire, PoE detection (802.3AF, 802.3AT, 802.3BT), Wire Tracking
РезолуцијаПриближно 0.3 м
Извор на енергијаНапојува со батерија
БојаЗелена
UPC713179655086

Информации за гаранцијата

For warranty details and terms, please refer to the official multicomp PRO website or contact their customer support. Keep your purchase receipt as proof of purchase.

Поддршка

If you encounter any issues or have questions not covered in this manual, please contact multicomp PRO customer support:

  • Webсајт: Visit the multicomp PRO Store on Amazon (for general product information and contact options)
  • Е-пошта: Погледнете го пакувањето на производот или официјалниот webстраница за директна поддршка преку е-пошта.
  • Телефон: Погледнете го пакувањето на производот или официјалниот webстраница за телефонска поддршка.

Поврзани документи - MP780994

Предview Multicomp Pro Insulation Resistance Tester (Model 72-9400A) - Technical Specifications and Features
Detailed technical specifications, features, and general characteristics of the Multicomp Pro Insulation Resistance Tester, model 72-9400A. Includes electrical specifications, accessories, and warranty information.
Предview Multicomp PRO MP730026 Digital Multimeter User Manual
Comprehensive user manual for the Multicomp PRO MP730026 Digital Multimeter. Covers safety precautions, quick start guide, detailed measurement procedures for voltage, current, resistance, capacitance, frequency, temperature, non-contact voltage detection, and transistor testing. Includes information on multimeter features like data hold and relative measurements, buzzer functions, technical specifications, standard accessories, and general care and cleaning instructions.
Предview Multicomp PRO Dual Channel Handheld Digital Storage Oscilloscopes Datasheet
Datasheet for Multicomp PRO Dual Channel Handheld Digital Storage Oscilloscopes (MP720780, MP720781, MP720782, MP720783, MP720856, MP720857) featuring oscilloscope, multimeter, and signal generator functions. Includes specifications, features, and accessories.
Предview Multicomp Pro Non-Contact AC Voltage Detectors: MP780768 & MP780770
Explore the Multicomp Pro range of professional-grade Non-Contact AC Voltage Detectors, including models MP780768 and MP780770. Designed for durability with IP67 rating and drop resistance, these tools offer reliable AC voltage detection for various applications from low-voltage systems to high-voltage urban supplies.
Предview Multicomp Pro SVP556H-4P XLR приклучок - 4-насочен, сребрен, лев навој - Технички лист
Технички лист со податоци за Multicomp Pro SVP556H-4P XLR приклучок. Има 4 контакти, сребрена позлата, лев навој и држач за кабел. Вклучува спецификации, атмосферски услови, електрични перформанси, идентификација на компоненти и број на дел.
Предview SKYSHL SS304T Mini PRO серија оптички рефлектометар за временски домен - упатство за користење
Сеопфатно упатство за корисникот за SKYSHL SS304T Mini PRO серијата оптички рефлектометар од временски домен, со детали за неговите карактеристики, работа, одржување и решавање проблеми при конструкција и одржување на оптички кабли.