Прирачници+

Anykit AN430D8DL3

Упатство за користење на Anykit Borescope Inspection Camera AN430D8DL3

Comprehensive instructions for setup, operation, and maintenance of your Anykit Industrial Endoscope Camera with 4.3" HD Screen.

1. Вовед

This manual provides detailed instructions for the safe and effective use of your Anykit Borescope Inspection Camera, model AN430D8DL3. This industrial endoscope is designed for visual inspection in hard-to-reach areas such as pipes, engines, and wall interiors. It features a 4.3-inch HD screen, a waterproof probe, and a semi-rigid cable for versatile applications.

Important Note: This endoscope is for viewing only and does not support taking pictures or videos.

2. Информации за безбедност

  • Не го користете уредот во средини со запаливи или експлозивни гасови.
  • Чувајте го уредот подалеку од силни електромагнетни полиња.
  • Ensure the device is fully charged before use to avoid interruptions during inspection.
  • Не обидувајте се да го расклопите или модифицирате уредот. За сите сервисирања обратете се на квалификуван персонал.
  • The camera probe is waterproof (IP67 rated), but the main display unit is not. Avoid exposing the display unit to water or moisture.
  • Avoid bending the semi-rigid cable excessively or sharply, as this may damage internal wiring.
  • Чувајте го уредот на ладно и суво место кога не го користите.

3. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

  • Anykit Borescope Inspection Camera (Main Unit with 4.3" HD Screen and integrated 10 ft semi-rigid cable)
  • USB кабел за полнење
  • Accessory Kit (Mirror, Hook, Magnet attachments)
  • Упатство за употреба
Anykit Borescope Inspection Camera package contents
Image: Contents of the Anykit Borescope Inspection Camera package, including the main unit, coiled cable, USB charging cable, accessory attachments, and user manual.
Borescope camera attachments: mirror, hook, and magnet
Image: Close-up of the accessory attachments: a mirror for side viewing, a hook for retrieving objects, and a magnet for metallic items. These attach to the camera probe tip.

4. Производот завршиview

The Anykit Borescope Inspection Camera is a self-contained unit designed for immediate use without external devices or software. It features a high-definition display and a flexible probe with adjustable lighting.

Anykit Borescope Inspection Camera main unit and coiled cable
Image: The main Anykit Borescope unit with its 4.3-inch screen displaying an engine component, connected to the coiled semi-rigid inspection cable with its illuminated camera tip.
Diagram of the 8.0mm camera lens and 6 LED lights
Слика: Експлодира view diagram illustrating the internal components of the 8.0mm camera lens and the arrangement of 6 LED lights for clearer imaging.
4.3 inch HD IPS screen features
Image: A close-up of the 4.3-inch HD IPS screen, highlighting its anti-scratch, anti-dust, and vivid color display capabilities, with a comparison to a less clear screen.
8.0mm inspection camera probe with adjustable LEDs and IP67 rating
Image: The 8.0mm inspection camera probe, showing its 6 adjustable LED lights and emphasizing its IP67 waterproof rating, suitable for wet environments.

Клучни компоненти:

  • 4.3" HD IPS Screen: Provides clear, real-time inspection views.
  • Camera Probe (0.3" / 8.0mm diameter): Small enough to access tight spaces.
  • 6 прилагодливи LED светла: Illuminates dark inspection areas with 3 brightness levels.
  • 10 ft Semi-Rigid Cable: Maintains its shape for precise maneuvering.
  • Built-in 2000mAh Rechargeable Battery: Offers up to 3 hours of continuous operation.
  • Оценка за водоотпорност IP67: The camera probe is protected against dust and temporary immersion in water.
  • Ротација на сликата од 180°: Adjust the image orientation on the screen.
  • 1.2-3.1" Focal Range: Оптимално viewing distance for clear images.

Контроли и пристаништа:

Anykit Borescope Inspection Camera controls and ports diagram
Image: Diagram showing the layout of controls and ports on the Anykit Borescope main unit. Labels include Charging Port, Charging Indicator, Reset button, Power Button, Zoom button, and Flips/Normal (image rotation) button.
  • Копче за вклучување: Го вклучува/исклучува уредот.
  • Копче за прилагодување на светлината: Cycles through 3 brightness levels for the camera LEDs.
  • Копче за зумирање: Magnifies the image on the screen.
  • Image Rotation Button: Flips the image 180 degrees.
  • Порта за полнење: USB порт за полнење на внатрешната батерија.
  • Индикатор за полнење: LED светло што го покажува статусот на полнење.
  • Копче за ресетирање: За фабричко ресетирање доколку е потребно.

5. Поставување

  1. Наполнете го уредот: Before first use, fully charge the borescope using the provided USB cable and a standard USB power adapter (not included). The charging indicator will show charging status. A full charge typically takes a few hours.
  2. Прикачете додатоци (опционално): If needed, carefully attach the mirror, hook, or magnet to the tip of the camera probe. Ensure it is securely fastened.
  3. Вклучување: Press and hold the Power Button until the screen illuminates. The device is ready for immediate use.
Anykit Borescope Inspection Camera held in hand, ready to use
Image: A hand holding the Anykit Borescope, demonstrating its compact size and readiness for use. The screen displays a live image from the camera probe.

6. Упатства за работа

  1. Вметнете ја сондата: Carefully guide the semi-rigid camera cable into the area you wish to inspect. The cable's flexibility allows it to navigate around obstacles, while its rigidity helps maintain direction.
  2. Прилагодете го осветлувањето: Press the Light Adjustment Button to cycle through the three brightness levels of the LED lights on the camera probe. Select the optimal brightness for clear visibility in the inspection area.
  3. View на екранот: Observe the live feed on the 4.3-inch HD IPS screen.
  4. Ротирај слика: If the image orientation is incorrect, press the Image Rotation Button to flip the view 180 степени.
  5. Зумирајте/одзумирате: Use the Zoom Button to magnify the image for closer inspection of details.
  6. Maneuver the Probe: Gently manipulate the cable to navigate the camera to different angles and depths. The 1.2-3.1 inch focal range provides the best clarity within this distance.
  7. Retrieve Objects (with attachments): If using the hook or magnet, carefully maneuver the probe to engage with the desired object for retrieval.
  8. Исклучено: After inspection, press and hold the Power Button to turn off the device.

Сценарија за апликација:

Anykit Borescope Inspection Camera used in various scenarios
Слика: Три поранешниamples of the borescope in use: inspecting an engine compartment, examining an HVAC duct, and checking plumbing under a sink.
  • Автомобилство: Inspect engine cylinders, valves, gears, and other internal components.
  • Home Inspection: Examine pipes, drains, wall cavities, and HVAC ducts for blockages, damage, or pests.
  • Индустриска употреба: Inspect machinery, equipment, and structural elements in manufacturing or construction.

7. Одржување

  • Чистење на сондата: По секоја употреба, особено во валкани или влажни средини, нежно избришете ја сондата и кабелот на камерата со мека, дamp крпа. Не користете абразивни средства за чистење или растворувачи.
  • Cleaning the Display Unit: Use a dry, soft cloth to clean the display screen and main unit. Avoid spraying liquids directly onto the unit.
  • Складирање: Coil the semi-rigid cable loosely and store the device in its original packaging or a protective case to prevent damage. Keep it in a dry place away from extreme temperatures.
  • Нега на батеријата: To prolong battery life, charge the device regularly, even if not in frequent use. Avoid completely draining the battery before recharging.

8 Смена на проблеми

Проблем Можна причина Решение
Уредот не се вклучува. Слаба батерија. Наполнете го уредот целосно користејќи го USB кабелот.
Нема слика на екранот. Camera cable not properly connected (if detachable model, though this is integrated). Internal issue. Ensure the device is powered on. If problem persists, try resetting the device. If still no image, contact support.
Сликата е заматена или нејасна. Incorrect focal distance. Insufficient lighting. Dirty camera lens. Adjust the distance between the camera and the object (optimal 1.2-3.1 inches). Increase LED brightness. Clean the camera lens with a soft cloth.
LED светлата не работат. Lights turned off or set to lowest brightness. Press the Light Adjustment Button to cycle through brightness levels.
Уредот се замрзнува или не реагира. Софтверски дефект. Press the Reset button (if available) or power off and restart the device.

9. Спецификации

Карактеристика Детал
Број на модел AN430D8DL3
Големина на екранот 4.3 inches IPS HD
Дијаметар на сондата на камерата 0.3 инчи (8.0 мм)
Должина на кабелот 10 стапки (3 метри)
Тип на кабел Полу-крути
Водоотпорен рејтинг IP67 (for camera probe only)
LED светла 6 прилагодливи нивоа на осветленост
Фокален опсег 1.2 - 3.1 inches (3cm - 8cm)
Капацитет на батеријата Литиум јон од 2000 mAh
Работно време До 3 часа (приближно)
Димензии на производот 6 x 2 x 3 инчи (главна единица)
Тежина на ставката 12.31 унци

10. Гаранција и поддршка

Anykit products are designed for reliability and performance. For warranty information and technical support, please refer to the warranty card included in your product package or visit the official Anykit website. Please have your model number (AN430D8DL3) and purchase date ready when contacting support.

For further assistance, you may contact Anykit customer service through their official channels.