1. Вовед
The VacLife Cordless Tire Inflator (Model ATJ-6988) is a portable and versatile air compressor designed for inflating tires on cars, bikes, and other inflatables. Its compact, cordless design makes it convenient for on-the-go use, providing up to 150 PSI pressure. Equipped with a powerful motor, it offers quick and efficient inflation, along with an LED digital display for real-time pressure monitoring and an auto-shutoff feature for safe operation. The integrated LED light enhances usability in low-light conditions.
2. Инструкции за безбедност
Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Чувајте го уредот подалеку од деца и домашни миленици.
- Do not operate the inflator in wet conditions or expose it to rain.
- Ensure the correct pressure setting for the item being inflated to prevent over-inflation and potential bursting.
- Allow the device to rest for at least 10 minutes after every 10 minutes of continuous use to prevent overheating.
- Не го расклопувајте или модифицирајте уредот. За сите сервисирања обратете се на квалификуван персонал.
- Користете го само испорачаниот кабел за полнење и компатибилни извори на енергија.
- The device operates at a noise level of approximately 80 dB. Use hearing protection if sensitive to noise or in prolonged use.
- Отстранете ги батериите одговорно во согласност со локалните прописи.
3. Содржина на пакетот
Проверете дали сите артикли се присутни во пакувањето:
- VacLife Cordless Tire Inflator Unit
- Air Hose with Schrader Valve Connector
- Адаптер за вентил Преста
- Ball Needle Nozzle
- Inflatable Toy Nozzle
- USB-кабел за полнење (USB-A до USB-C)
- Упатство за употреба (овој документ)
4. Производот завршиview

Figure 4.1: VacLife Cordless Tire Inflator and Included Accessories. The image displays the main inflator unit on the right, featuring a digital display and control buttons. To the left, an air hose, two different cone-shaped nozzles, a ball needle, and a USB charging cable are shown.
4.1 Компоненти
- Главна единица: Houses the motor, battery, display, and controls.
- Воздушно црево: Connects the inflator to the tire valve.
- Млазници: Various adapters for different inflation needs (e.g., car tires, bike tires, sports balls, inflatable toys).
- USB порта за полнење: За полнење на внатрешната батерија.
4.2 Контроли и дисплеј
- Копче за вклучување (центар): Press and hold to turn on/off. Short press to start/stop inflation.
- Копче за режим (М): Cycles through inflation modes (car, motorcycle, bicycle, ball) and pressure units (PSI, BAR, KPA, KG/CM²).
- Копчиња '+' / '-': Ја прилагодува целната вредност на притисокот.
- Копче за светло (икона на сонцето): Toggles the LED light modes (Flashlight, Alarm Light, SOS Light).
- LED дигитален дисплеј: Shows real-time pressure, preset pressure, selected unit, battery level, and inflation mode icons.
5. Поставување
5.1 Полнење на уредот
- Поврзете го испорачаниот USB кабел за полнење со приклучокот за полнење на надувувачот.
- Поврзете го другиот крај од USB кабелот со компатибилен USB адаптер за напојување (не е вклучен) или USB порт.
- The battery indicator on the LED display will show charging status. A full charge typically takes 3-4 hours.
- Once fully charged, the device can operate continuously for approximately 20 minutes.
5.2 Прикачување на цревото за воздух и млазниците
- Screw the air hose securely into the air outlet port on the top of the inflator.
- Изберете ја соодветната млазница за предметот што сакате да го надувате.
- Screw the selected nozzle onto the end of the air hose.
6. Упатства за работа
6.1 Вклучување/исклучување
- To turn on: Press and hold the Power button (center button) for 2-3 seconds until the display illuminates.
- To turn off: Press and hold the Power button for 2-3 seconds. The device will also automatically shut off after a period of inactivity.
6.2 Selecting Pressure Unit and Mode
- After powering on, press the Mode button (M) to cycle through the four available pressure units: PSI, BAR, KPA, and KG/CM².
- Continue pressing the Mode button to select the desired inflation mode (car, motorcycle, bicycle, ball). Each mode may have a default pressure range.
6.3 Поставување на целниот притисок
- Once the desired unit and mode are selected, use the '+' and '-' buttons to adjust the target pressure value. The preset pressure will flash on the display.
- Refer to your vehicle's or item's recommended pressure (usually found on a sticker inside the car door, owner's manual, or on the item itself).
6.4 Почетна инфлација
- Connect the air hose (with appropriate nozzle) securely to the valve stem of the item to be inflated. The display will show the current pressure.
- Press the Power button (center button) once to start inflation. The inflator will begin pumping air, and the real-time pressure will be displayed.
- The inflator will automatically stop once the preset target pressure is reached. This is the auto-shutoff feature.
- To manually stop inflation at any time, press the Power button again.
- Disconnect the air hose from the valve stem.
Exampле: Inflating a 195/55 R15 car tire from 22 PSI to 36 PSI typically takes approximately 3 minutes. For optimal performance and device longevity, allow the inflator to rest for at least 10 minutes after every 10 minutes of continuous operation.
6.5 Користење на LED светлото
- Press the Light button (sun icon) to cycle through the LED light modes:
- Прво притиснете: Activates the constant flashlight mode.
- Второ пресување: Activates the alarm light (slow flashing).
- Трет прес: Activates the SOS light (Morse code for SOS).
- Четврто печат: Го исклучува LED светлото.
7. Одржување
- Чистење: Избришете ја надворешноста на уредот со мека, гamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is off and disconnected from power before cleaning.
- Складирање: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
- Нега на батеријата: To prolong battery life, fully charge the device before long-term storage and recharge it every 3-6 months if not in use. Avoid completely draining the battery frequently.
- Нега на млазницата: Keep nozzles clean and free of debris to ensure proper air flow.
8 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Уредот не се вклучува. | Слаба батерија или воопшто не се полни. | Наполнете го уредот целосно. |
| Надувувачот запира предвреме. | Preset pressure reached; Auto-shutoff activated. | This is normal operation. Check if the desired pressure is achieved. |
| Inflator not pumping air. | Air hose or nozzle not securely connected. | Проверете дали сите врски се цврсти. |
| Неточно отчитување на притисокот. | Poor connection to valve stem. | Ensure the air hose is firmly attached to the valve stem without leaks. |
| Уредот се прегрева. | Continuous use for too long. | Allow the device to cool down for at least 10 minutes after 10 minutes of use. |
9. Спецификации
| Карактеристика | Детал |
|---|---|
| Број на модел | АТЈ-6988 |
| Бренд | VacLife |
| Максимален притисок | 150 PSI |
| Стапка на проток на воздух | 20 л/мин |
| Капацитет на батеријата | 3 x 2,000mAh Lithium Ion batteries (6,000mAh total) |
| Време на полнење | Прибл. 3-4 часа |
| Континуирано работно време | Приближно 20 минути (по целосно полнење) |
| Ниво на бучава | 80 dB |
| Димензии на производот | 7.01 x 5.21 x 16.61 cm |
| Тежина на ставката | 558 гр |
| Извор на енергија | Напојува со батерија |
| Voltage | 12 волти |
| Посебни карактеристики | Portable, Cordless, LED Digital Display, Auto Shutoff, LED Light (Flash, Alarm, SOS) |
10. Гаранција и поддршка
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please visit the official VacLife webлокација или контактирајте го нивниот оддел за корисничка поддршка. Чувајте ја сметката како доказ за купување за гаранциски побарувања.





