Тера HW0015

Упатство за користење на безжичен скенер за баркодови Tera HW0015

Модел: HW0015

1. Вовед

This manual provides detailed instructions for the setup, operation, and maintenance of your Tera HW0015 Wireless Barcode Scanner. This device is designed for efficient and accurate scanning of 1D, 2D, and QR codes across various surfaces and conditions, offering flexible connectivity options and user-friendly features.

Tera HW0015 Wireless Barcode Scanner and Charging Cradle

Figure 1: Tera HW0015 Wireless Barcode Scanner with its charging cradle.

2. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

Contents of the Tera HW0015 package

Слика 2: Визуелен приказ на артиклите вклучени во пакувањето на производот.

3. Карактеристики на производот

Tera HW0015 scanner compatible with various operating systems and devices

Figure 3: The scanner demonstrates wide compatibility with different devices and operating systems.

4. Поставување

4.1 Полнење на скенерот

  1. Connect the charging cable to the charging dock and a power source.
  2. Поставете го скенерот на држачот за полнење. Обезбедете правилно порамнување за полнење.
  3. The scanner's screen will indicate charging status. A full charge typically takes several hours.

4.2 Вклучување/исклучување

Locate the physical power switch key on the scanner. Push the switch key to the 'ON' position to power on the device. Push it to the 'OFF' position to power off and conserve battery.

Tera HW0015 scanner with physical power switch and battery indicator

Figure 4: The physical power switch and battery capacity of the scanner.

5. Упатства за работа

5.1 Основно скенирање

  1. Ensure the scanner is powered on and connected to your host device (see Section 6 for connectivity).
  2. Насочете го прозорецот на скенерот кон баркодот што сакате да го скенирате.
  3. Press the trigger button. A scan line or light will appear.
  4. Hold steady until a successful scan is indicated by an audible beep, vibration, or visual confirmation on the screen.

5.2 Screen Navigation and Settings

The integrated screen and keypad allow for direct configuration. Use the navigation buttons (Up, Down, OK, Back) to browse menus and adjust settings. The screen displays current time, battery level, connection mode, barcode data, total stored barcodes, and total amount.

Tera HW0015 scanner screen showing connection settings and data

Figure 5: The scanner's screen interface for settings and data display.

Video 1: Demonstrates the Tera HW0015 Scanner's digital screen and physical power switch functionality.

6. Поврзување

The Tera HW0015 offers multiple connectivity options:

Tera HW0015 scanner showing 2.4G wireless and Bluetooth connection options

Figure 6: Illustration of the 2.4G wireless and Bluetooth connectivity options.

7. Режими на скенирање

The scanner supports various operational modes to suit different scanning needs:

Tera HW0015 scanner in Manual-Trigger mode

Figure 7: The scanner being used in Manual-Trigger mode.

Tera HW0015 scanner in Continuous Scan mode on a conveyor belt

Figure 8: The scanner operating in Continuous Scan mode for multiple items.

Tera HW0015 scanner in Auto-Sense mode on a desk

Figure 9: The scanner in Auto-Sense mode, automatically scanning items.

8. Одржување

Tera HW0015 scanner demonstrating durability with drop test and IP ratings

Figure 10: The scanner's durability features, including drop test and IP ratings.

9 Смена на проблеми

ПроблемМожна причинаРешение
Скенерот не се вклучува.Слаба батерија; Прекинувачот за напојување е исклучен.Charge the scanner; Ensure the physical power switch is in the 'ON' position.
Не може да се поврзе преку Bluetooth.Incorrect pairing mode; Host device Bluetooth off; No pairing barcode scanned.Ensure Bluetooth is enabled on your device. Navigate to 'Connection' on the scanner screen and select 'Bluetooth'. Scan the appropriate pairing barcode from the full user manual if required for your specific Bluetooth profile (HID, SPP, BLE).
Cannot connect via 2.4G wireless.Dongle not inserted; Dongle not recognized.Ensure the 2.4G USB dongle is securely inserted into your host device. Try a different USB port.
Скенерот не чита баркодови.Barcode damaged/unreadable; Incorrect scanning mode; Scanning window dirty.Ensure the barcode is clear and undamaged. Check the scanner's screen to confirm the correct scanning mode is active. Clean the scanning window.
Нема пренесени податоци до уредот домаќин.Connection lost; Incorrect interface mode.Verify the connection status on the scanner's screen. Re-establish the connection if necessary. Ensure the scanner is set to the correct interface mode (e.g., HID for keyboard emulation).

10. Спецификации

КарактеристикаДетал
МоделHW0015
Димензии3.3 x 4.7 x 7.08 инчи
Тежина1.08 фунти
Поврзување2.4G безжичен, Bluetooth, USB кабел
Извор на енергијаНапојувана со батерија (2600mAh)
Компатибилни уредиДесктоп, лаптоп, паметен телефон, таблет
Supported 1D CodesUPC-A, UPC-E, EAN-8, EAN-13, Code 128, Code 39, Code 93, Code 11, Interleaved 2 of 5, Matrix 2 of 5, Standard 2 of 5, Coda bar, MSI Plessey, RSS
Supported 2D CodesQR code, Data Matrix, PDF417, Aztec, Maxicode, Micro QR
Меморија16MB (складира над 100,000 баркодови)
ТрајностIK08, IP54, 6.6ft (2m) drop test passed

11. Гаранција и поддршка

Tera products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official Tera webстраница. Ве молиме задржете го доказот за купување за гаранциски барања.

Manufacturer: Tera

Поврзани документи - HW0015

Предview Tera 9100 1D/2D Wired Desktop Barcode Scanner User Manual
This user manual provides comprehensive guidance for the Tera 9100 1D/2D wired desktop barcode scanner, covering setup, configuration, operation, and advanced features.
Предview Упатство за користење на кабелски скенер за баркодови Tera 8100Y
Официјално упатство за корисникот за баркод скенер Tera 8100Y 1D/2D со кабел за снимање на површина. Обезбедува детални упатства за поставување, конфигурација, комуникација, уредување на податоци и поддржани симбологии. Достапно на повеќе јазици.
Предview Tera 5100E Wireless/Wired 1D Laser Barcode Scanner User Manual
This user manual provides comprehensive instructions and specifications for the Tera 5100E Wireless/Wired 1D Laser Barcode Scanner, covering setup, configuration, and operation.
Предview Упатство за користење на скенер за баркодови Tera 6900 1D - Конфигурација и работа
Детално упатство за корисникот за скенерот за баркодови Tera 6900 1D. Опфаќа поставување, режими на скенирање, јачина на звук, мелодија, USB поставки, конфигурација на симболика, вметнување префикс/суфикс, вметнување низа, криење податоци, терминатори, ASCII графикон и решавање проблеми.
Предview Упатство за користење на безжичен 2D мини баркод скенер Tera HW0010
Ова упатство за користење дава сеопфатни упатства за безжичниот 2D мини баркод скенер Tera HW0010, опфаќајќи поставување, работа, режими на комуникација (2.4G, Bluetooth) и детални конфигурациски поставки за ефикасно снимање податоци.
Предview Упатство за употреба на безжичен 5100D скенер за баркод Tera D2
Сеопфатно упатство за корисникот за безжичниот 2D скенер за баркодови Tera D5100, со детали за поставувањето, режимите на работа, конфигурацијата и ресурсите за поддршка.