IKOVWUK Laser Level D1-8

1. Вовед

Thank you for choosing the IKOVWUK D1-8 Laser Level. This manual provides essential information for the safe and effective use of your new laser level. Please read this manual thoroughly before operation and keep it for future reference. The IKOVWUK D1-8 is designed for precise leveling and alignment tasks in various applications.

2. Информации за безбедност

ПРЕДУПРЕДУВАЊЕ: ЛАСЕРСКО ЗРАЧЕЊЕ. НЕ ГЛЕДАЈТЕ ВО ЗРАКОТ.

• This product is a Class II laser product with a maximum output of <1mW at 510-530nm.
• Never look directly into the laser beam. Direct exposure to the laser beam can cause eye injury.
• Не го насочувајте намерно ласерскиот зрак кон луѓе или животни.
• Не ракувајте со ласерското ниво во експлозивни атмосфери, како на пример во присуство на запаливи течности, гасови или прашина.
• Чувајте го уредот подалеку од дофат на деца.
• Користете само наведениот тип на батерија и осигурајте се дека поларитетот е точен за време на инсталацијата.
• Avoid exposing the device to extreme temperatures, water, or high humidity.

3. Производот завршиview

The IKOVWUK D1-8 Laser Level is a compact, yellow and black device designed for precise leveling tasks. It emits bright green laser lines for horizontal and vertical alignment, making it suitable for various indoor and outdoor construction and DIY projects.

The D1-8 Laser Level typically features:

• Laser Emitters (for horizontal and vertical lines)
• Control Panel/Buttons
• Оддел за батерии
• Locking/Unlock Switch (for pendulum)
• Mounting Thread (for tripod)

4. Поставување

1. Инсталација на батерија: The IKOVWUK D1-8 requires batteries for operation (not included). Locate the battery compartment, typically on the side or bottom of the device. Open the compartment, insert the required batteries (e.g., AA or Li-ion pack) ensuring correct polarity (+/-), and close the compartment securely.
2. Поставување: Place the laser level on a stable, flat surface or mount it onto a compatible tripod using the integrated mounting thread. Ensure the surface is free from vibrations.
3. Unlock Pendulum: If your model has a locking switch, slide it to the "unlocked" position. This allows the internal pendulum to self-level.

5. Операција

1. Вклучување: Press the power button or slide the main switch to the "ON" position. The laser level will typically emit a horizontal line first.
2. Режим на самонивелирање: When the pendulum is unlocked, the device will automatically self-level within its specified range (e.g., ±3°). If the device is outside its self-leveling range, the laser lines may flash rapidly or an audible alarm may sound. Adjust the position of the laser level until it self-levels.
3. Switching Laser Modes: Press the mode button (often labeled "H" for horizontal, "V" for vertical, or a general mode button) to cycle through different laser line combinations:
   • Само хоризонтална линија
   • Само вертикална(и) линија(и)
   • Cross lines (horizontal and vertical combined)
   • All lines (if multiple vertical lines are available)
4. Рачен режим: To use the laser level at an angle (e.g., for stair railings), engage the manual mode. This is typically done by locking the pendulum (sliding the switch to the "locked" position) and then powering on the device. In manual mode, the laser lines will not self-level and can be projected at any angle.
5. Исклучено: Press the power button again or slide the main switch to the "OFF" position. If the pendulum was unlocked, ensure it is locked before storage to protect the internal mechanism.

6. Одржување

• Чистење: Користете мека, гamp cloth to clean the exterior of the laser level. Do not use abrasive cleaners or solvents. Keep the laser emission windows clean for optimal performance.
• Складирање: Store the laser level in its original case or a protective bag when not in use. Ensure the pendulum is locked before storage. Store in a dry place, away from direct sunlight and extreme temperatures.
• Нега на батеријата: Отстранете ги батериите ако уредот нема да се користи подолг период за да спречите протекување и оштетување.
• Калибрација: While factory calibrated, if you suspect the laser level is no longer accurate, consult a professional for recalibration.

7 Смена на проблеми

8. Спецификации

9. Гаранција и поддршка

IKOVWUK products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official IKOVWUK website. Please have your model number (D1-8) and purchase information ready when contacting support.