Ulecoce U18R-B

Ulecoce Keyless Entry Door Lock Deadbolt with Handle Set User Manual

Model: U18R-B

Вовед

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ulecoce Keyless Entry Door Lock Deadbolt with Handle Set. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Карактеристики на производот

Diagram showing multiple unlocking methods for the Ulecoce smart lock.

Figure 1: Multiple Convenient Unlocking Methods. This image illustrates the various ways to unlock the Ulecoce smart lock, including keypad code, one-touch locking, one-time codes, anti-peeping password, physical key, and door knob.

Содржина на пакетот

СтавкаКоличина
Deadbolt Front Lock1
Deadbolt Rear Lock1
Door Knob Front1
Door Knob Rear1
Брава за заклучување2
Клуч2
Дијаграм за отворање на дупки1
Installation Tutorial Card1
Инструкции1
Mounting Plate Screws 1.46in/37mm (A)2
Mounting Plate Screws 1.19in/30mm (B)3
Mounting Plate Screws 0.24in/6mm (C)2
Fixed Leg (D)2
Silicone Ring (E)1
Резервни делови4

Спецификации

Diagram showing dimensions of the Ulecoce U18 Smart Door Lock Set.

Figure 2: U18 Smart Door Lock Set Core Advantages and Dimensions. This image provides detailed measurements of the lock components and highlights key features like one-touch lock, pin password, auto lock, door knob, 100 user codes, low battery alert, mechanical key, and IP54 waterproof rating.

Водич за инсталација

The Ulecoce Keyless Entry Door Lock is designed for easy installation without the need for extra drilling. A screwdriver is the only tool required.

Проверка на компатибилност на вратите

Осигурајте се дека вашата врата ги исполнува следниве спецификации:

Diagram illustrating easy installation without drilling and door compatibility requirements.

Figure 3: Easy Installation without Drilling. This image shows the required latch hole and door compatibility (single cylinder vs. mortise/integrated) and provides key measurements for backset and hole diameter.

Инсталација чекор-по-чекор

  1. Подгответе ја вратата: Ensure the door is clean and the existing holes are clear.
  2. Инсталирајте ја бравата: Вметнете ја резето во работ на вратата и прицврстете го со завртки.
  3. Install the exterior keypad assembly: Route the cable through the door and align the keypad with the latch.
  4. Install the interior mounting plate: Secure the mounting plate to the exterior assembly using screws.
  5. Connect the cable and install the interior assembly: Connect the cable from the exterior unit to the interior unit. Secure the interior unit to the mounting plate.
  6. Install the door knob: Attach the handle set according to the provided diagram.
  7. Вметнете батерии: Open the battery cover on the interior unit and insert 4 AA batteries (not included).
  8. Тестирајте ја бравата: Verify that the deadbolt extends and retracts smoothly.
Image of the Ulecoce Keyless Entry Door Lock installed on a door.

Figure 4: Installed Ulecoce Keyless Entry Door Lock. This image displays the smart lock and handle set mounted on a white door, showcasing неговата естетска интеграција.

Поставување и програмирање

Before initial use, you will need to set up administrator codes and user codes.

Почетно поставување

  1. Set Administrator Code: Follow the instructions on the Installation Tutorial Card to set your primary administrator code. This code is essential for managing other user codes.
  2. Додадете кориснички кодови: You can program up to 97 user codes. These can be permanent, one-time, or scheduled codes.
Image of a person using a smartphone to send a one-time PIN code for the smart lock.

Figure 5: One-Time PIN Code Functionality. This image depicts a user sending a temporary access code via smartphone, highlighting the convenience of managing access remotely.

Anti-Peeping Password Feature

To enhance security, you can enter random digits before or after your actual passcode. The lock will still recognize the correct sequence within the longer string of numbers.

Diagram showing the anti-peep tactile keypad feature, allowing extra digits before and after the correct code.

Figure 6: Anti-Peep Tactile Keypad. This image illustrates how the anti-peeping feature works, allowing users to input garbled numbers before and after the correct password to prevent code exposure.

Упатства за работа

Отклучување на вратата

Заклучување на вратата

Одржување

Diagram showing the internal components of the Ulecoce smart lock, including battery compartment and circuit boards.

Figure 7: U18 Zinc Alloy Lock Body and Internal Components. This image provides an exploded view of the lock, highlighting its robust zinc alloy construction and internal electronics, including the battery compartment.

Решавање проблеми

ПроблемМожна причинаРешение
Заклучувањето не реагира на внесување преку тастатурата.Low batteries; incorrect code entered; keypad malfunction.Replace batteries; re-enter code carefully; contact support if issue persists.
Завртката не се извлекува/вовлекува целосно.Misalignment during installation; obstruction in door frame; low batteries.Check alignment of lock and strike plate; clear any obstructions; replace batteries.
Функцијата за автоматско заклучување не работи.Feature disabled; incorrect time setting; door sensor issue.Ensure auto-lock is enabled and set correctly in programming; check door closure.
Screws loosen after use.Normal wear and tear; insufficient tightening during installation.Periodically re-tighten all mounting screws.

Гаранција и поддршка

Ulecoce is committed to providing peace of mind. We offer a 3-годишна гаранција на производот и lifetime after-sales service.

If you have any questions or concerns, please feel free to send us an email. Our customer support team is ready to assist you at any time, providing 24/7 email support and prompt responses to resolve your needs.

За поддршка, посетете ја страницата Ulecoce Store on Amazon or contact customer service via email (details typically found on product packaging or official webстраница).

Поврзани документи - U18R-B

Предview Ulecoce Keyless Entry Door Lock Quick Set Up Guide
Concise guide for setting up your Ulecoce keyless entry door lock, covering administrator password management, user code management, system settings, and factory reset.
Предview Quick Set Up Guide for Ulecoce Keyless Entry Keypad Deadbolt
Step-by-step guide for setting up the Ulecoce Keyless Entry Keypad Deadbolt, including administrator password management, user code setup, system settings, and factory reset.
Предview Ulecoce U18 Keyless Entry Door Lock Installation Manual
Comprehensive installation, usage, and programming guide for the Ulecoce U18 Keyless Entry Keypad Deadbolt with Handle Set. Includes step-by-step instructions, troubleshooting, and safety information.
Предview Ulecoce U68 Keyless Entry Door Lock Installation Manual
Comprehensive installation, programming, and usage guide for the Ulecoce U68 Keyless Entry Door Lock with Handle Set, featuring WiFi, app control, and keypad access. Includes step-by-step instructions, troubleshooting, and safety information.
Предview Ulecoce Fingerprint Keypad Deadbolt Quick Set Up Guide
Concise guide for setting up your Ulecoce Fingerprint Keypad Deadbolt, covering administrator password management, user code management, system settings, and factory reset.
Предview Ulecoce U68 Keypad Deadbolt Installation Manual
Comprehensive installation and programming guide for the Ulecoce U68 Keypad Deadbolt, including step-by-step instructions, troubleshooting, and safety information.