Упатство за употреба на Hantek DSO8072E 6-во-1 рачен осцилоскоп

1. Вовед

This manual provides comprehensive instructions for the safe and effective operation of your Hantek DSO8000E Series Handheld Oscilloscope. This device integrates multiple functions including an Oscilloscope, Recorder, Digital Multimeter (DMM), Spectrum Analyzer, Frequency Counter, and Arbitrary Waveform Generator. Please read this manual thoroughly before using the instrument and retain it for future reference.

2. Производот завршиview

2.1 Клучни карактеристики

• Six-in-one Functionality: Oscilloscope, Recorder, DMM, Spectrum Analyzer, Frequency Counter, Arbitrary Waveform Generator.
• Издржливост на животната средина: IP-51 rated for dust, drip, and shake resistance.
• Безбедност: Large fuse conforms to European Safety Standards.
• Моќен менаџмент: Battery indicator, easy-change connect points, and selectable 18650 battery box.
• Физичка безбедност: Anti-theft lock hole, tripod fixed hole, hang rope, and built-in flashlight.
• Поврзување: Replaceable BNC safety joints, USB Host/Device 2.0, optional WIFI/LAN.
• Спецификации на осцилоскоп: 70MHz-200MHz bandwidth, 1GSa/s sample rate, 2M memory depth.
• Произволен генератор на бранови форми: 25MHz, 200MSa/s DDS, 12-bit vertical resolution.
• Дигитален мултиметар: 6000 counts, AC/DC voltage, AC/DC current, resistance, continuity, capacitance, diode function.
• Analysis Capabilities: FFT spectral analysis, waveform math (add, subtract, multiply, divide), X-Y mode, over 20 automatic measurements.
• Прикажи: Large 5.6-inch TFT Color LCD (640x480 resolution).
• Излез на податоци: Waveform data can be exported in WORD, EXCEL, BMP, JPG formats.

2.2 Распоред на уреди

Familiarize yourself with the physical components and controls of the Hantek DSO8072E.

Слика 2.2.1: Аголна view of the Hantek DSO8072E Handheld Oscilloscope. This image shows the device from a side angle, highlighting its robust casing, integrated kickstand, and the main display screen with various control buttons.

Слика 2.2.2: Предна страна view of the Hantek DSO8072E Handheld Oscilloscope. The screen displays a sine wave and a square wave, illustrating its multi-channel measurement capability. Various function buttons and input ports are visible below the screen.

Слика 2.2.3: Страна view of the Hantek DSO8072E Handheld Oscilloscope with its kickstand extended, allowing for desktop use. This view emphasizes the ergonomic design and portability of the device.

2.3 Вклучени додатоци

Verify that all the following accessories are included in your package:

Слика 2.3.1: A grid displaying the various accessories included with the Hantek DSO8072E. These typically include oscilloscope probes, DMM test leads, a power adapter, a USB cable, a carrying bag, and a software CD.

• Oscilloscope Probes (2)
• DMM Test Leads
• Адаптер за напојување
• USB кабел
• Торба за носење
• Софтвер CD
• Упатство за употреба (овој документ)

3. Поставување

3.1 Вклучување/исклучување

1. Полнење на батеријата: Connect the power adapter to the device and a power outlet. The battery indicator will show charging status. Ensure the battery is sufficiently charged before portable use.
2. Вклучување: Притиснете и задржете го МОЌ button located on the side or front panel until the screen illuminates.
3. Исклучено: Притиснете и задржете го МОЌ копчето додека не се појави барањето за исклучување, а потоа потврдете.

3.2 Почетна конфигурација

Upon first power-on or after a factory reset, you may need to configure basic settings such as language, date, and time. Navigate through the menus using the directional buttons and confirm selections with the ENTER копче.

4. Упатства за работа

The Hantek DSO8072E offers multiple operational modes. Use the dedicated function buttons (e.g., SCOPE/RECORDER, DMM, SPECTRUM) to switch between modes.

4.1 Режим на осцилоскоп

This mode is used for observing and analyzing electrical signals. Connect probes to the BNC inputs (CH1, CH2).

1. Притиснете го SCOPE/RECORDER button to enter Oscilloscope mode.
2. Adjust vertical sensitivity (Volts/Div) using the CH1/CH2 knobs or corresponding menu options.
3. Adjust horizontal time base (Sec/Div) using the ХОРИ копче.
4. Configure trigger settings (Type, Source, Level) using the ТРИГ button and menu.
5. Користете AUTORANGE for automatic scaling or ТРЧЕ/СТОП to pause/resume waveform acquisition.
6. Access measurement functions (e.g., Vpp, Freq, RMS) via the МЕАС копче.

Слика 4.1.1: A collage of various waveform displays on the Hantek DSO8072E screen, demonstrating its capability to visualize different signal types, including sine waves, square waves, modulated signals, and FFT analysis results.

4.2 Recorder Mode

Record long-term signal changes. Press SCOPE/RECORDER and select Recorder from the menu.

4.3 Digital Multimeter (DMM) Mode

За мерење на волуменtage, current, resistance, capacitance, and performing diode/continuity tests. Connect test leads to the DMM input jacks (VΩmA, COM).

1. Притиснете го DMM копче.
2. Select the desired measurement function (e.g., DCV, ACV, Resistance) using the menu buttons.
3. Поврзете ги пробните води со колото што се испитува.

4.4 Режим на анализатор на спектар

Analyze the frequency components of a signal. Press the СПЕКТР копче.

4.5 Frequency Counter Mode

Measure the frequency of input signals. This function is often integrated within the oscilloscope or DMM modes, or accessible via a dedicated menu option.

4.6 Arbitrary Waveform Generator (AWG) Mode

Generate various standard and custom waveforms. Connect the AWG output to the circuit requiring a signal input.

1. Притиснете го AWG button (if available) or navigate through the Utility menu.
2. Select waveform type (Sine, Square, Triangle, etc.) and adjust parameters (Frequency, Amplitude, Offset).
3. Enable output.

5. Одржување

5.1 Чистење

Избришете го уредот со мека, гamp крпа. Не користете абразивни средства за чистење или растворувачи. Пред чистење, проверете дали уредот е исклучен од струја и исклучен од сите извори на енергија.

5.2 Грижа за батерии

To prolong battery life, avoid fully discharging the battery frequently. Store the device in a cool, dry place when not in use for extended periods. If using 18650 batteries, ensure they are of good quality and correctly inserted.

5.3 Ажурирања на фирмверот

Periodically check the Hantek official website for firmware updates to ensure optimal performance and access to new features. Follow the instructions provided with the firmware update package carefully.

6 Смена на проблеми

7. Спецификации

8. Гаранција и поддршка

Hantek products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Hantek website. For technical support, troubleshooting assistance, or service inquiries, please contact Hantek customer service through their official channels.

Производител: Hantek Qingdao

Webсајт: Visit the Hantek Store on Amazon