1. Вовед
The ABSINA Mobile Wallbox 11 kW 16A is a versatile and portable charging solution for electric vehicles. Designed for both home and travel use, it offers convenient and safe charging with integrated app control and RFID activation. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device.
Figure 1: ABSINA Mobile Wallbox 11 kW 16A. This image shows the compact design of the wallbox with its CEE plug and Type 2 charging connector.
2. Инструкции за безбедност
Внимателно прочитајте ги сите безбедносни упатства пред да го користите уредот. Непочитувањето на овие упатства може да резултира со електричен удар, пожар или сериозни повреди.
- Ensure the power supply meets the specified requirements (3 phases 415 V 50/60 Hz).
- Не користете го уредот ако кабелот или приклучокот се оштетени.
- Не обидувајте се сами да го отворите или поправите уредот. Контактирајте квалификуван персонал за сервис.
- Keep the device away from water and extreme temperatures. The device is IP65 rated, but avoid submersion.
- Секогаш осигурувајте правилно заземјување.
- The integrated Type A+DC6 mA residual current circuit breaker provides enhanced safety. Do not bypass or modify it.
- Before installation, contact your local grid operator to register the wallbox as required.
Figure 2: Maximum Safety Features. The image highlights the Type A 30mA AC residual current protection and Type B 6mA DC fault current protection for enhanced user safety.
3. Содржина на пакетот
Проверете дали сите артикли се присутни во пакувањето:
- ABSINA Mobile Wallbox 11 kW 16 A (three-phase)
- 3 x RFID Chips
- 3 x RFID картички
- Држач за монтирање на ѕид
- Материјал за монтирање (завртки, сидра)
- Упатство за употреба (овој документ)
4. Поставување и инсталација
The ABSINA Mobile Wallbox is designed for "Plug and Play" use, requiring no complex installation. However, for permanent mounting, a wall bracket is included.
4.1 Initial Setup (Plug and Play)
- Поврзете се на напојување: Insert the CEE plug of the Wallbox into a compatible 3-phase 415 V 50/60 Hz CEE socket.
- Вклучување: The Wallbox will power on automatically. If the indicator light blinks red, press the emergency stop button once to reset.
- Подготвен за употреба: The Wallbox is now ready for charging, which can be activated via RFID or the app.
Figure 3: Plug & Play Functionality. This image illustrates the simple connection of the CEE plug to a power outlet, emphasizing ease of use without complex electrical installation.
4.2 Монтирање на ѕид (опционално)
For a more permanent setup, use the provided wall mount bracket and hardware.
- Изберете локација: Select a suitable wall location near a compatible CEE socket, ensuring adequate ventilation and protection from direct weather exposure (though the unit is IP65 rated).
- Означете ги точките за дупчење: Use the wall mount bracket to mark the drilling points on the wall.
- Дупчете дупки: Drill holes at the marked points and insert the provided anchors.
- Безбедна заграда: Attach the wall mount bracket to the wall using the screws.
- Mount Wallbox: Carefully slide the Wallbox onto the mounted bracket until it clicks securely into place.
Figure 4: Easy Operation. The image shows the Wallbox mounted on a wall, connected to a vehicle, demonstrating its simple "Connect. Charge." principle.
5. Упатства за работа
5.1 Charging Your Electric Vehicle
- Connect Vehicle: Plug the Type 2 charging cable from the Wallbox into your electric vehicle's charging port.
- Activate Charging:
- Using RFID: Hold one of the provided RFID chips or cards over the RFID reader area on the Wallbox. The Wallbox will activate, and charging will begin.
- Користење на апликацијата: Open the ABSINA app (or compatible smart home app like Tuya Smart) on your smartphone. Select the Wallbox and initiate charging from the app interface.
- Полнење на мониторот: The app provides real-time data including charging voltage (V), current (A), power (kW), charged energy (kWh), and charging time.
- Стоп за полнење:
- Using RFID: Hold the RFID chip/card over the reader again to stop charging.
- Користење на апликацијата: Stop charging directly from the app.
- Disconnect Vehicle: Once charging is complete or stopped, unplug the Type 2 cable from your vehicle.
Figure 5: Misuse Protection. The image shows a hand activating the Wallbox with an RFID chip, illustrating the secure activation method.
5.2 Функции за контрола на апликацијата
The dedicated app (or compatible smart home app) provides advanced control and monitoring capabilities:
- Adjust Charging Current: Set the charging current from 8 A to 16 A in 1 A increments to manage charging speed.
- Set Charging Mode: Choose preferred charging modes.
- Закажи полнење: Utilize the charging delay function to start charging at a later time.
- Monitor Real-time Data: View live charging statistics.
- Далечинско стартување/стопирање: Control charging sessions from your smartphone.
Забелешка: While the app displays charging data, this data is typically not stored permanently on the device once the charging cable is disconnected. For historical charging data, refer to your vehicle's own app if available.
6. Одржување
To ensure the longevity and optimal performance of your ABSINA Mobile Wallbox, follow these maintenance guidelines:
- Чистење: Wipe the exterior of the Wallbox with a soft, damp крпа. Не користете абразивни средства за чистење или растворувачи. Пред чистење, проверете дали уредот е исклучен од струја.
- Инспекција на кабел: Regularly inspect the charging cable and CEE plug for any signs of damage, fraying, or wear. If damage is found, discontinue use immediately and contact support.
- Грижа за конектор: Keep the Type 2 connector clean and free of debris. Ensure the protective cap is in place when not in use.
- Складирање: When not in use, especially during travel, store the Wallbox in a dry, cool place, protected from direct sunlight and extreme temperatures.
Figure 6: Mobile Wallbox for Travel. This image shows the Wallbox conveniently stored in a car trunk, highlighting its portability and ease of transport.
7 Смена на проблеми
If you encounter issues with your ABSINA Mobile Wallbox, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Wallbox does not power on. | No power from CEE socket; CEE plug not fully inserted; internal fault. | Check CEE socket power supply; ensure plug is fully inserted; try a different CEE socket if available. |
| Полнењето не започнува. | RFID not read correctly; app connection issue; vehicle not ready to charge; emergency stop engaged. | Ensure RFID chip/card is held correctly; check app connection and Wallbox status; ensure vehicle is ready to accept charge; press emergency stop button once to reset. |
| Charging stops unexpectedly. | Overload protection activated; vehicle charging complete; power interruption. | Check for error codes on Wallbox/app; verify vehicle charging status; check CEE socket power. |
| App not connecting to Wallbox. | Wi-Fi signal weak; incorrect app settings; Wallbox not in pairing mode. | Ensure strong Wi-Fi signal at Wallbox location; restart app and Wallbox; refer to app's pairing instructions. |
If the problem persists after attempting these solutions, please contact ABSINA customer support.
8. Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | АБСИНА |
| Број на модел | 301018 |
| Моќ на полнење | 11 kW |
| Струја за полнење | Adjustable 8 A to 16 A |
| Фази | 3-фаза |
| Влез волуменtage | 415 V AC |
| Фреквенција | 50/60 Hz |
| Тип на конектор | Type 2 (output), CEE 16A (input) |
| Класа за заштита | IP65 (Водоотпорен) |
| Безбедносни карактеристики | Integrated Type A+DC6 mA RCD, Overvoltage, Undervoltage, Overload, Temperature, Short-circuit protection |
| Оценка за запаливост | UL94V-0 |
| Тежина на ставката | 2.25 килограми |
| Димензии на производот (Д x Ш x В) | 25.7 x 15.3 x 9.5 cm |
| Потрошувачка во мирување | < 3 W |
9. Гаранција и поддршка
ABSINA products are designed for reliability and performance. For warranty information and technical support, please refer to the official ABSINA webстраницата или директно контактирајте ја нивната служба за корисници.
The manufacturer, ABSINA GmbH, is based in Germany and is committed to providing competent support.
Контакт информации: Please visit the official ABSINA webстраница за најактуелни контакт информации за корисничка поддршка и гаранциски барања.
