Упатство за употреба на радио контролер ARRIS Jumper T20S V2

Вовед

This manual provides detailed instructions for the setup, operation, and maintenance of your ARRIS Jumper T20S V2 Radio Controller. Please read this manual thoroughly before using the device to ensure proper function and safety.

Клучни карактеристики

• RDC90 Sensor Gimbals: Experience precise and sensitive control for your RC devices.
• Vivid OLED Screen Display: Stay informed with crucial flight data, telemetry, and settings on a high-resolution screen.
• ELRS and EdgeTX Compatibility: Benefit from reliable, extended-range communication and advanced firmware capabilities.
• Поддршка за повеќе протоколи: Connect effortlessly to a wide array of RC models and brands.
• Customization for Personalized Flying: Tailor your control setup with configurable switches, buttons, and functions via EdgeTX.

Производот завршиview

Familiarize yourself with the components and design of your Jumper T20S V2 Radio Controller.

Слика: напред view of the Jumper T20S V2 Radio Controller, showing the gimbals, OLED screen, power button, and various control switches and buttons.

Слика: Аголна предна страна view of the Jumper T20S V2 Radio Controller, highlighting the gimbals and control layout.

Слика: Страна view of the Jumper T20S V2 Radio Controller, showing the foldable antenna in an extended position.

Слика: Заден дел view of the Jumper T20S V2 Radio Controller, displaying the external cooling fan and battery compartment area.

Image: Diagram illustrating the airflow and cooling fan system integrated into the Jumper T20S V2 for high-power ELRS operation.

Слика: Крупен план view of the omnidirectional foldable antenna, designed to provide stable signal support in all directions.

Поставување

1. Инсталација на батерија

1. Open the battery compartment cover located on the rear of the controller.
2. Insert two 21700 batteries, ensuring correct polarity.
3. Добро затворете го капакот на преградата за батерии.

2. Првично вклучување

1. Press and hold the power button (located centrally on the front panel) until the OLED screen illuminates.
2. Контролерот ќе се стартува во оперативниот систем EdgeTX.

3. Gimbal Calibration (Recommended)

For optimal performance, it is recommended to calibrate the gimbals after initial setup or if you experience inconsistent control. Refer to the EdgeTX documentation for detailed calibration procedures.

Упатства за работа

1. Navigation and Menu System

The Jumper T20S V2 utilizes the EdgeTX firmware. Navigation is primarily done using the scroll wheel and menu buttons. The OLED screen displays all relevant information.

• Тркало за лизгање: Used to navigate through menus and adjust values.
• Копчиња за мени: Access various settings and functions.
• Системско мени: Configure global settings, model setup, and radio calibration.

2. Model Setup and Binding

To control an RC model, you must first create a model profile and bind the controller to the receiver.

1. Navigate to the Model Select screen in EdgeTX.
2. Create a new model or select an existing one.
3. Configure the internal or external RF module settings (e.g., ELRS, Multi-Protocol) to match your receiver.
4. Initiate the binding process on both the controller and the receiver according to their respective manuals.
5. Verify successful binding by checking receiver telemetry or control response.

3. Customizing Controls

The Jumper T20S V2 offers extensive customization. You can assign functions to switches, buttons, and sliders through the EdgeTX firmware.

• Access the Mixer and Special Functions menus within EdgeTX to configure control assignments.
• Adjust gimbal tension and stick settings by disassembling the radio, if desired (refer to advanced user guides for detailed instructions).

Одржување

• Чистење: Користете мека, сува крпа за чистење на надворешноста на контролерот. Избегнувајте абразивни средства за чистење или растворувачи.
• Складирање: Store the controller in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• Ажурирања на фирмверот: Regularly check for and install the latest EdgeTX firmware updates to ensure optimal performance and access new features. Refer to the official EdgeTX webсајт за инструкции.
• Грижа за гимбал: Keep gimbals free from dust and debris. Avoid applying excessive force.

Решавање проблеми

Controller does not power on:

Ensure batteries are correctly installed and fully charged. Check battery polarity.

No response from RC model:

Verify that the controller is properly bound to the receiver. Check model settings in EdgeTX for correct RF protocol and channel assignments. Ensure the RC model's battery is charged and connected.

OLED screen is blank or flickering:

Restart the controller. If the issue persists, ensure firmware is up to date. Contact support if the problem continues.

Gimbal movement is erratic:

Perform a gimbal calibration through the EdgeTX system menu. Check for any physical obstructions or damage to the gimbals.

Спецификации

Гаранција и поддршка

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official ARRIS webстраница. Зачувајте го доказот за купување за гаранциски побарувања.

For further assistance with EdgeTX firmware, visit the official EdgeTX project website and community forums for comprehensive resources and community support.