1. Вовед
The DAYTECH Care Call Bell Wireless System is designed to provide convenient and reliable assistance for caregivers and those in need of care. This system allows individuals to easily alert their caregiver from another room, reducing the need for constant supervision and providing peace of mind. It is ideal for the elderly, patients, pregnant women, and individuals with disabilities, ensuring quick contact in case of an emergency.
Figure 1.1: DAYTECH Care Call Bell System Components
2. Карактеристики на производот
- Лесно ракување: Simply press the call button to send an alert to the receiver. The soft button design is easy to press for all users.
- Plug-in Receiver with Night Light: The AC-powered receiver plugs directly into a wall outlet and includes a convenient night light feature, useful during nighttime.
- Широк опсег: The system offers a maximum reception range of 100 meters (328 feet) in open areas, easily covering multiple floors in a home.
- Portable Wristwatch Transmitters: Two wristwatch-style call buttons are included, allowing users to wear them for easy access and portability. Note: The transmitters are NOT waterproof.
- Приспособливи предупредувања: Choose from 55 different melodies and adjust the volume across 5 levels, from mute (0dB) up to 110dB. The receiver's LED light flashes when an alert is received.
- Систем што може да се прошири: The receiver can be paired with up to 55 transmitters, and each transmitter can operate multiple receivers, allowing for flexible system expansion.
Figure 2.1: Customizable Melodies and Volume Levels
Figure 2.2: Wireless Signal Range and Coverage
3. Содржина на пакетот
Ве молиме проверете ја содржината на пакувањето при отпакувањето:
- 1 x AC Plug-in Receiver
- 2 x Wrist Watch Transmitters (each with 1 CR2032 battery installed)
- 1 x Англиски кориснички прирачник
4. Водич за поставување
4.1 Почетно поставување и спарување
The receiver and transmitters are pre-paired from the factory. If re-pairing is needed or if you wish to change the melody, follow these steps:
- Plug the receiver into a standard AC power outlet.
- On the receiver, press the Forward or Backward button (located on the side) to select your desired melody.
- Long press the volume button on the receiver until you hear a "ding-dong" sound, indicating it has entered pairing mode.
- Immediately press the call button on the transmitter. You will hear a "ding" sound from the receiver, confirming successful pairing.
Figure 4.1: Changing Receiver Melody and Pairing
4.2 Функција за ноќно светло
The receiver features a night light. To control it:
- Press and hold the backward button (middle button on the side) on the receiver for 5 seconds to switch the night light ON or OFF.
Figure 4.2: Night Light Switch and Product Dimensions
5. Упатства за работа
Once the system is set up and paired, operation is straightforward:
- To Send an Alert: Simply press the large red button on the wristwatch transmitter.
- Receiving an Alert: The receiver will play the selected melody and its LED light will flash.
- Прилагодување на јачината на звукот: Use the volume buttons on the side of the receiver to increase or decrease the alert volume.
Figure 5.1: Caregiver and Patient Interaction with the System
Figure 5.2: Everyday Use Scenarios
6. Одржување
6.1 Чистење
Wipe the receiver and transmitters with a soft, dry cloth. Do not use abrasive cleaners or immerse the devices in water.
6.2 Замена на батеријата на предавателот
The wristwatch transmitters are powered by a CR2032 coin cell battery. When the signal becomes weak or the transmitter stops working, it's time to replace the battery.
- Using a small screwdriver, unscrew the 4 screws on the back of the transmitter.
- Внимателно отворете го casing and remove the internal PCB (Printed Circuit Board).
- Locate the CR2032 battery on the back of the PCB. Remove the old battery and insert a new CR2032 battery, ensuring correct polarity.
- Reassemble the transmitter, ensuring the PCB is correctly seated and the screws are tightened.
Figure 6.1: Transmitter Battery Replacement Steps
7 Смена на проблеми
If you encounter issues with your DAYTECH Care Call Bell system, please refer to the following common solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Receiver does not sound/flash. | Receiver not plugged in or no power. Transmitter battery is low or dead. Transmitter is out of range. Receiver and transmitter are not paired. | Ensure receiver is securely plugged into a working AC outlet. Replace the CR2032 battery in the transmitter. Move transmitter closer to the receiver. Re-pair the transmitter and receiver (refer to Section 4.1). |
| Short reception range. | Obstacles (thick walls, metal objects) interfering with signal. Other wireless devices causing interference. | Relocate the receiver to a more central location or away from large metal objects. Ensure there are no major obstructions between the transmitter and receiver. Minimize interference from other wireless devices if possible. |
| Button on transmitter requires too much force. | Possible manufacturing variation or internal component issue. | Ensure the button is pressed firmly and directly. If the issue persists and affects usability, please contact customer support for assistance under warranty. |
8. Спецификации
| Карактеристика | Детал |
|---|---|
| Број на модел | E-01 2-1 JP |
| Извор на енергија (приемник) | Кабел за напојување со наизменична струја |
| Батерија (предавател) | 1 x CR2032 (вклучено) |
| Димензии на приемникот (В x Ш x Д) | 9.5 cm x 6.5 cm x 2 cm (3.74 во x 2.56 во x 0.79 инчи) |
| Тежина на ресиверот | 75 g (2.65 oz) |
| Transmitter Dimensions (L x W) | 5 cm x 4.5 cm (1.97 in x 1.77 in) - Total length 26.7 cm (10.5 in) |
| Тежина на предавателот | 50 g (1.76 oz) |
| Опсег | До 100 метри (328 стапки) на отворени површини |
| Мелодии | 55 може да се избере |
| Нивоа на јачина на звук | 5 (0dB до 110dB) |
| Тип на монтирање | Приклучок |
| Технологија на сензори | Контакт сензор |
| UPC | 779584901873 |
Слика 8.1: Димензии на производот надview
9. Гаранција и поддршка
DAYTECH provides a Lifetime Quality Guarantee for this product from the date of purchase. If you encounter any issues during use, please do not hesitate to contact us. We are committed to providing prompt support and ensuring your complete satisfaction. Our goal is to offer you peace of mind with our products and services.
For support, please refer to the contact information provided with your purchase or visit the official DAYTECH webсајт.
