Yaheetech Upholstered Bed 140 x 200 cm Instruction Manual

1. Вовед

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Yaheetech Upholstered Bed (Model YA614434). Please read all instructions carefully before beginning assembly and retain this manual for future reference.

The Yaheetech Upholstered Bed is designed to offer optimal relaxation and comfort. It features a high, tufted headboard with a wing-shaped design, sturdy wooden slats, a solid metal frame, and robust legs. The padded components ensure quiet use, and the soft, breathable linen cover enhances sleeping comfort. Its modern design adds an elegant and welcoming atmosphere to any bedroom.

2. Информации за безбедност

• Read all instructions thoroughly before assembly.
• Пред да започнете со склопување, проверете дали сите делови се присутни и неоштетени.
• Assemble the bed on a soft, clean surface (e.g., a carpet or blanket) to prevent scratching or damage to the product or floor.
• Не ги затегнувајте премногу завртките за време на склопувањето, бидејќи тоа може да ги оштети навоите или компонентите.
• Држете ги малите делови и материјалите за пакување подалеку од деца и домашни миленици за да спречите опасност од задушување.
• Assembly is recommended for two people to ensure safety and ease.
• The maximum load capacity for this bed is 272 kg. Do not exceed this weight limit.

3. Содржина на пакетот

Your Yaheetech Upholstered Bed is shipped in two separate packages. Please ensure you have received both packages before beginning assembly.

Пакетот вклучува:

• 1 x Upholstered Bed Frame Components
• 1 x Accessory Pack (containing all necessary hardware)
• 1 x Упатство за склопување (овој документ)

Забелешка:

• Mattress and bed linen (duvet, bed sheet, pillows, etc.) are not included.
• Do not start assembly until you have received all packages.

4. Поставување и склопување

Follow the step-by-step instructions provided in the included assembly guide. The following points highlight key features and tips for assembly:

1. Распакувајте и идентификувајте делови: Carefully unpack all components from both packages. Lay them out on a clean, soft surface and compare them against the parts list in the separate assembly guide to ensure everything is present and undamaged.
2. Соберете рамка: Begin by attaching the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure but do not fully tighten until the entire frame is loosely assembled.
3. Поддршка од Центарот за инсталација: Attach the center support beam and its legs to the bed frame. This provides crucial stability for the slat system.
4. Прикачете летвички: The wooden slats are designed for easy installation using Velcro fasteners. Simply unroll the slat system and press the Velcro strips firmly onto the corresponding strips on the bed frame. This method helps to keep the slats in place and minimizes noise.
5. Безбедни врски: Once all major components are in place, go back and fully tighten all screws and bolts.

Figure 4.1: Overall dimensions of the bed frame.

Figure 4.2: L-shaped metal brackets at joints for increased firmness.

Figure 4.3: Slats with Velcro fasteners and EVA foam for quiet assembly and use.

Figure 4.4: Multiple support points for enhanced stability.

5. Упатства за работа

Once fully assembled and all connections are secure, the Yaheetech Upholstered Bed is ready for use. Simply place your mattress (140 cm x 200 cm recommended) onto the wooden slats. The high headboard is designed to accommodate mattresses of various thicknesses, with a 21.5 cm distance between the headboard and the bed frame.

6. Одржување

• Чистење: The linen fabric upholstery can be cleaned with a soft, damp cloth. Avoid using harsh chemical cleaners, abrasive materials, or excessive moisture, as these may damage the fabric or finish.
• Редовни проверки: Periodically inspect all screws and bolts to ensure they remain tight. Retighten if necessary to maintain the bed's stability and prevent squeaking.
• Чистење под кревет: The bed features an 11 cm ground clearance, allowing most robot vacuums to easily clean underneath.

Figure 6.1: 11 cm ground clearance for easy cleaning and protective foot caps.

Figure 6.2: Details of the soft linen fabric and high-density foam for comfort and easy maintenance.

7 Смена на проблеми

• Звуци на чкрипење: If the bed makes noise, check all bolts and screws for tightness. Ensure the Velcro on the slats is firmly attached to the frame. The EVA foam on the slats is designed to minimize noise.
• Креветот се чувствува нестабилен: Verify that all connections are secure and that all support legs, including the central ones, are properly installed and making firm contact with the floor.
• Делови што недостасуваат: If you find any parts missing or damaged upon unpacking, please contact Yaheetech customer support immediately for assistance.

8. Спецификации

9. Гаранција и поддршка

For warranty information, product support, or to inquire about replacement parts, please contact Yaheetech customer service. You can find more information and contact details on the official Yaheetech store page:

Visit the Yaheetech Store