BSIDE Dual Channel Oscilloscope Multimeter Instruction Manual

1. Вовед

This manual provides detailed instructions for the safe and effective use of your BSIDE 3-in-1 Handheld Oscilloscope Multimeter. This versatile device integrates the functions of a dual-channel oscilloscope, a true RMS multimeter, and a DDS signal generator, making it an essential tool for various electrical testing and measurement applications.

Слика 1: Готовоview of 3-in-1 functionality (Multimeter, DDS Generator, Oscilloscope).

2. Поставување

2.1 Содржина на пакетот

Проверете дали сите артикли наведени подолу се присутни во вашиот пакет:

• 1 x Handheld Oscilloscope Multimeter
• 1 x Oscilloscope Probe
• 1 x BNC to Double-Headed Alligator Clip Test Leads
• 1 x Водечки тестови
• 1 x Термопар
• 1 x торбичка за носење
• 1 x Кабел за полнење
• 8 x Marker Rings
• 1 x Алатка за прилагодување
• 2 x IC Test Protection Caps
• 1 x Упатство за употреба

Забелешка: The flexible AC current clamp is not included in the package and must be purchased separately if required.

Figure 2: The BSIDE Handheld Oscilloscope Multimeter and its complete set of accessories.

2.2 Уредот завршиview

Familiarize yourself with the physical components of the device:

• Прикажи: Features a 3.98-inch TFT LCD with a 178° full-viewагол за јасни отчитувања.
• Влезни пристаништа: Dual channels for oscilloscope measurements and a dedicated DDS output port.
• Контроли: Intuitive button layout for mode selection, adjustments, and data saving.
• Заштита: Encased in a full-body soft silicone case for enhanced durability.

Figure 3: The device features a large 3.98-inch TFT LCD for optimal readability.

Figure 4: The top panel includes input ports for CH1, CH2, and DDS signal output.

Figure 5: The device is protected by a durable full-body soft silicone case.

3. Упатства за работа

3.1 Вклучување/исклучување

To power on the device, press and hold the power button (usually marked with a circle and a vertical line) until the screen illuminates. To power off, press and hold the same button until the device shuts down.

3.2 Избор на режим

The device offers three primary modes: Oscilloscope, Multimeter, and DDS Generator. Use the dedicated РЕЖИМ button to cycle through these functions. The current mode will be displayed on the screen.

3.3 Функција на осцилоскоп

In Oscilloscope mode, the device displays waveforms for electrical signals. It features dual channels with a 25MHz bandwidth and a 208MSa/s real-time sample стапка.

• Поврзување на сонди: Connect the oscilloscope probe to the appropriate channel input (CH1 or CH2) on the top of the device. Ensure a secure connection.
• Прилагодување на поставките: Use the navigation buttons to adjust vertical sensitivity (V/div), time base (s/div), and trigger settings. The АВТОМАТСКИ button can be used for automatic waveform adjustment and display.
• Мерења: The screen will display various waveform parameters such as Vpp (peak-to-peak voltage), Vmax, Vmin, Vavg, Vrms, frequency, and duty cycle.

3.4 Функција на мултиметар

In Multimeter mode, the device performs various electrical measurements with 6000 counts display and True RMS capability.

• Поврзување на тест кабли: Connect the red and black test leads to the appropriate input jacks (e.g., VΩmA for voltage/resistance/current, COM for common ground).
• Видови на мерење: The multimeter can measure:
  • DC Voltage: до 1000V
  • AC Voltage: до 750V
  • DC Current: Up to 600mA
  • AC Current: Up to 600mA (or up to 6000A with optional flexible AC current clamp)
  • Resistance: Up to 60MΩ
  • Capacitance: Up to 99.99mF
  • Temperature: -20℃ to 1000℃ / -4℉ to 1832℉ (using thermocouple)
  • Тест за диоди
  • Тест за континуитет
• Избор на опсег: The device typically operates in auto-ranging mode, but manual range selection may be available via the controls.

3.5 DDS Generator Function

The DDS (Direct Digital Synthesis) Generator function allows you to output various waveforms for testing circuits.

• Поврзување на излез: Connect the DDS output port to your circuit using appropriate cables.
• Видови бранови форми: Select from sine wave, square wave, triangle wave, full wave, half wave, and sawtooth wave.
• Прилагодување на параметрите: Adjust the frequency (0-2MHz) and output amplitude (0.1-3V) using the device controls. For square waves, the duty cycle (1%-99%) can also be adjusted.

4. Одржување

4.1 Полнење на батеријата

The device is equipped with a 5000mAh rechargeable Li-ion battery. Use the provided charging cable to connect the device to a suitable USB power source. The battery indicator on the screen will show the charging status.

Figure 6: The device features a high-capacity 5000mAh rechargeable battery.

4.2 Чистење и чување

To clean the device, use a soft, dry cloth. Do not use abrasive cleaners or solvents. Store the device in its carrying case in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

5 Смена на проблеми

Доколку наидете на проблеми со вашиот уред, погледнете ги следниве вообичаени чекори за решавање проблеми:

• Уредот не се вклучува: Ensure the battery is charged. Connect the device to a charger and attempt to power on again.
• Неточни читања: Check that probes and test leads are correctly connected and not damaged. Verify that the correct measurement mode and range are selected.
• No waveform display: In oscilloscope mode, ensure the input signal is within the device's measurement range and that the trigger settings are appropriate. Use the АВТОМАТСКИ button to attempt automatic adjustment.

For further assistance, please contact BSIDE customer support.

6. Спецификации

7. Гаранција и поддршка

For warranty information, technical support, or service inquiries, please refer to the official BSIDE webлокација или директно контактирајте го нивниот оддел за корисничка поддршка. Чувајте ја сметката за купување како доказ за купување за гаранциски побарувања.