UIBI X3 & X7 Jump Starter with Air Compressor User Manual

1. Вовед

Thank you for choosing the UIBI X3 or X7 Jump Starter with Air Compressor. This versatile device combines a powerful jump starter, a high-performance tire inflator, a portable power bank, and an emergency LED light. Designed for convenience and safety, it is an essential tool for any vehicle owner, providing reliable assistance for dead batteries, flat tires, and charging needs on the go.

This manual will guide you through the proper use, maintenance, and troubleshooting of your UIBI jump starter. Please read it thoroughly before first use to ensure safe and optimal performance.

2. Информации за безбедност

Always observe the following safety precautions to prevent injury or damage to the device and your vehicle.

• Прочитајте ги сите инструкции: Before operating the jump starter, read and understand all safety information and operating instructions.
• Заштита на очите: Always wear safety glasses when working with batteries.
• Вентилација: Ensure adequate ventilation when jump starting a vehicle.
• Превенција од искри: Avoid creating sparks near the battery. Do not smoke or allow open flames near the battery or jump starter.
• Поларитет: Поврзете го clamps with correct polarity. Connecting incorrectly can cause damage to the device, battery, or vehicle.
• Деца и домашни миленици: Чувајте го уредот подалеку од дофат на деца и домашни миленици.
• Складирање: Чувајте го уредот на ладно и суво место, подалеку од директна сончева светлина и екстремни температури.
• Damaged Device: Do not use the device if it is damaged, cracked, or leaking.
• Полнење: Only charge the device using the provided charging cable and a compatible adapter.
• Изложеност на вода: Не го изложувајте уредот на дожд или влажни услови.

3. Содржина на пакетот

Проверете дали сите артикли се присутни во вашиот пакет:

• UIBI X3 or X7 Jump Starter
• Паметни кабли за скокач
• Air Hose with Nozzles (for various inflatables)
• USB-C кабел за полнење
• Случај за складирање
• Упатство за употреба

Слика 3.1: UIBI X3 and X7 Jump Starters shown with all included accessories, including smart jumper cables, air hose, various nozzles, and charging cables, neatly organized in their storage cases.

4. Производот завршиview

Familiarize yourself with the components of your UIBI jump starter.

Слика 4.1: The UIBI X3 model, highlighting its digital display for battery level and pressure, and the control buttons for jump start, air compressor, and LED light functions.

Слика 4.2: The UIBI X7 model, featuring its larger digital display for real-time pressure and battery status, along with intuitive control buttons for various modes.

Клучни компоненти:

• Дигитален екран: Shows battery level, air pressure (PSI, BAR, KPA, Kg/cm²), and operational modes.
• Копче за вклучување: Го вклучува/исклучува уредот.
• Копче за режим (М): Switches between air compressor modes (e.g., car, motorcycle, bicycle, ball).
• +/- Копчиња: Adjusts target air pressure.
• Порт за стартување со скокање: For connecting smart jumper cables.
• Отвор за црево за воздух: For connecting the air hose.
• USB-A Output (QC3.0): For charging electronic devices.
• Type-C PD45W Input/Output: For charging the jump starter and charging electronic devices.
• LED фенерче: Provides illumination, strobe, and SOS signals.

5. Поставување

Before first use, ensure the jump starter is fully charged.

5.1 Почетно полнење

1. Connect the provided USB-C charging cable to the Type-C PD45W port on the jump starter.
2. Поврзете го другиот крај од USB-C кабелот со компатибилен USB адаптер за ѕид (не е вклучен).
3. The digital display will show the charging progress. Charge until the battery indicator shows full.

Слика 5.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output.

Целосното полнење обично трае приближно 2 часа со полнач PD45W.

6. Operating Instructions (Jump Starter)

Follow these steps to safely jump start your vehicle.

1. Подгответе го возилото: Turn off the vehicle's ignition and all accessories (headlights, radio, A/C). Engage the parking brake.
2. Поврзете ги каблите за скокање со стартерот за скокање: Insert the blue plug of the smart jumper cables into the jump start port on the UIBI device. Ensure a firm connection.
3. Поврзете Clamps до батерија:
   • Поврзете го ЦРВЕНО (+) clamp на позитивно (+) терминалот на батеријата на возилото.
   • Поврзете го ЦРНО (-) clamp на негативен (-) терминалот на батеријата на возилото.

   The smart jumper cables will beep if an incorrect connection is detected. Correct the connection before proceeding.
4. Стартувајте го возилото: Откако клamps are correctly connected and the indicator on the smart cable is solid green (or as per cable indicator), start your vehicle's engine.
5. Отстранете го Clamps: Once the vehicle starts, immediately remove the BLACK (-) clamp first, then the RED (+) clamp from the battery. Disconnect the smart jumper cables from the UIBI device.

Слика 6.1: The UIBI X7 Jump Starter connected to a car battery, demonstrating the proper setup for jump-starting a vehicle. The display shows '8.8.8' indicating readiness.

Слика 6.2: The UIBI X3 Jump Starter connected to a car battery, illustrating the connection of the smart clamps to the battery terminals for a quick and safe jump start.

Забелешка: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.

7. Air Compressor Operation

The UIBI jump starter features a built-in air compressor for inflating tires and other inflatables.

1. Поврзете го цревото за воздух: Screw the air hose into the air hose port on the jump starter.
2. Прикачете млазница: Select the appropriate nozzle for your item (e.g., Schrader valve for car tires, needle for balls) and attach it to the end of the air hose.
3. Вклучување: Press the Power button to turn on the device. The display will show the current pressure.
4. Изберете режим (опционално): Press the 'M' (Mode) button to cycle through preset inflation modes (e.g., car, motorcycle, bicycle, ball). Each mode has a default pressure, which can be adjusted.
5. Поставете целен притисок: Use the '+' and '-' buttons to set your desired pressure.
6. Започнете со инфлација: Press the Power button again to start the air compressor. The display will show the real-time pressure.
7. Автоматско исклучување: Компресорот автоматски ќе застане штом ќе се достигне претходно поставениот притисок.
8. Исклучете го: Unscrew the air hose from the item and the jump starter.

Слика 7.1: The UIBI X7 Jump Starter actively inflating a car tire, demonstrating its cordless air compressor function. The display shows the current PSI reading.

Слика 7.2: The UIBI X3 Jump Starter in use, inflating a car tire. This image highlights the multi-use air pump feature with auto-stop functionality.

8. Функција на енергетска банка

The UIBI jump starter can charge your electronic devices.

1. Поврзете го уредот: Use a compatible USB cable (not included) to connect your smartphone, tablet, or other electronic device to either the USB-A (QC3.0) output port or the Type-C PD45W port on the jump starter.
2. Вклучување: Press the Power button on the jump starter to activate the charging function.
3. Полнење: Your device will begin charging. The jump starter's display may show its remaining battery level.

Слика 8.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output, allowing it to function as a portable power bank.

9. Функција на LED светло

The integrated LED flashlight offers three modes for various situations.

1. Вклучи: Press and hold the LED light button (often integrated with the power button or a dedicated button) to turn on the flashlight.
2. Променете ги режимите: Briefly press the LED light button repeatedly to cycle through the modes:
   • Стабилна светлина: За општо осветлување.
   • Светло за строб: За сигнализирање или привлекување внимание.
   • SOS сигнал: For emergency situations, emitting the Morse code SOS pattern.
3. Исклучи: Press and hold the LED light button again to turn off the light.

Слика 9.1: The UIBI X7 Jump Starter demonstrating its emergency LED light, capable of providing stable illumination, strobe, and SOS signals for various situations.

10. Полнење на уредот

To ensure your UIBI jump starter is always ready, recharge it after each use or when the battery level is low.

• Connect the provided USB-C charging cable to the Type-C PD45W input port on the jump starter.
• Connect the other end of the USB-C cable to a USB wall adapter (e.g., 5V/2A, 9V/2A, or PD45W compatible).
• The digital display will indicate the charging status. Charge until the battery icon shows full.
• It is recommended to fully charge the device every 3-6 months even if not in use to maintain battery health.

11. Одржување

Proper maintenance will extend the life of your UIBI jump starter.

• Чистење: Избришете го уредот со мека, сува крпа. Не користете груби хемикалии или абразивни средства за чистење.
• Складирање: Store the device in its carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
• Нега на батеријата: Полнете го уредот на секои 3-6 месеци за да спречите длабоко празнење и да го продолжите животниот век на батеријата.
• Инспекција на кабел: Regularly inspect the jumper cables and air hose for any signs of damage or wear. Replace if necessary.

12 Смена на проблеми

Доколку наидете на проблеми, погледнете ги следните вообичаени проблеми и решенија.

Ако проблемот продолжи откако ќе ги испробате овие решенија, контактирајте ја корисничката поддршка.

13. Спецификации

14. Гаранција и поддршка

UIBI products are designed and manufactured to the highest quality standards. For warranty information and customer support, please refer to the warranty card included in your package or visit the official UIBI webстраница. Доколку имате какви било прашања или ви е потребна помош, слободно контактирајте го нашиот тим за корисничка поддршка.