Упатство за употреба на ласерскиот гравер SCULPFUN S30

Вовед

This manual provides essential information for the safe and effective operation of your SCULPFUN S30 Laser Engraver. Please read it thoroughly before setup and use to ensure optimal performance and safety.

Figure 1: SCULPFUN S30 Laser Engraver with various engraved samples including a wallet, business cards, and a wooden insect model.

Информации за безбедност

Operating a laser engraver involves potential hazards. Adhere strictly to the following safety guidelines:

• Заштита на очите: Always wear appropriate laser safety goggles (Laser Class IV) when the laser is active. Never look directly at the laser beam.
• Вентилација: Работете со граверот во добро проветрена просторија за да ги отстраните испарувањата и чадот што се создаваат за време на гравирањето и сечењето.
• Опасност од пожар: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation. The S30 includes an emergency power switch for quick shutdown.
• Компатибилност на материјали: Only engrave or cut materials safe for laser processing. Avoid PVC, vinyl, and other materials that produce toxic fumes.
• Заштита на работната површина: Use the provided A4 size steel mat or a similar fire-resistant surface to protect your workbench from laser damage.
• Деца и домашни миленици: Чувајте ги децата и миленичињата подалеку од операционата област.
• Електрична безбедност: Ensure the power supply is correctly connected and grounded. Do not operate with wet hands or in damp услови.

Карактеристики на производот

The SCULPFUN S30 Laser Engraver incorporates advanced features for precision and efficiency:

• Automatic Air Assist: Equipped with an automatically controlled air pump. This feature intelligently manages air-assist via the M8 button in LightBurn software, directing high-pressure airflow through the metal nozzle. This significantly increases cutting speed (over 5 times faster) and improves cutting performance by clearing debris and reducing charring.
• Ultra-fine Laser Modeling Technology: Features a precise 0.005mm industrial linear guide and a laser focus of 0.06x0.06mm. This results in higher energy density, stronger cutting penetration, and enhanced engraving accuracy, eliminating wave lines in engravings.
• Безбеден и стабилен дизајн: Constructed from high-strength aluminum alloy, capable of supporting up to 50kg. Includes an emergency power switch for immediate shutdown and an A4 size steel mat to protect surfaces.
• Expandable Engraving Area: The original working area is approximately 400x400mm. It can be expanded to 935x400mm with a Y-axis extension kit, or further to 935x905mm with an XY-axis extension kit (sold separately), accommodating larger projects.
• Широка компатибилност: The latest 32-bit motherboard supports automatic Air-Assist control. Features Bluetooth and SD card offline printing. Compatible with LightBurn (with M8 air support), LaserGRBL, Benbox, GrblController, and LiteFire. Supports Windows and MAC systems. File formats include NC, BMP, JPG, PNG, DXF, and other image formats.
• Ласерски излез: Class IV laser with 5000mW output power.

Figure 2: Illustration of the S30's high-density, sharp laser beam and 5W powerful laser beam shaping technology.

Figure 3: Close-up of the S30's built-in high-pressure air assist nozzle, demonstrating airflow.

Figure 4: Diagram showing the automatic controlled air assist feature and its integration with LightBurn software (M8 Air Assist Switch).

Figure 5: Comparison illustrating the benefits of automatic air assist over traditional manual air pumps for clean edges and efficient cutting.

Figure 6: Visual representation of the high precision 0.005mm industrial grade linear rail, highlighting the improved engraving accuracy without wavy lines.

Водич за поставување

Follow these steps to set up your SCULPFUN S30 Laser Engraver:

1. Отпакување: Carefully remove all components from the packaging. Verify all parts are present against the packing list.
2. Собрание: Assemble the frame according to the included assembly instructions. Ensure all screws are tightened securely.
3. Инсталација на ласерски модул: Mount the laser module onto the gantry. Connect the laser module cable to the main control board.
4. Поврзување на воздушната пумпа: Connect the air pump to the designated port on the laser module and the main control board.
5. Power and USB Connection: Connect the power adapter to the engraver and a power outlet. Connect the engraver to your computer via the provided USB cable.
6. Инсталација на софтвер: Install the recommended software (e.g., LightBurn, LaserGRBL) on your computer. Drivers may be required.
7. Почетна калибрација: Follow the software's instructions for initial calibration, including setting the working area and focusing the laser.

Слика 7: Готовоview of the SCULPFUN S30 components, including the laser module, air pump, and frame parts.

Упатства за работа

This section outlines the basic steps for operating your laser engraver:

1. Подгответе материјал: Place the material to be engraved or cut on the work surface, ensuring it is flat and secure. Use the steel mat underneath.
2. Поставување софтвер: Open your chosen laser control software (e.g., LightBurn). Import or create your design.
3. Поставки за параметри: Adjust laser power, speed, and passes based on the material and desired effect. Refer to material test guides for optimal settings.
4. Фокусирајте го ласерот: Manually or automatically adjust the laser focus for optimal performance. The S30 features a fixed-focus laser, simplifying this step.
5. Enable Air Assist: For cutting operations, ensure the automatic air assist is enabled in the software (M8 command in LightBurn). For engraving, it may be turned off for finer details.
6. Започнете со операција: Initiate the engraving or cutting process from the software. Monitor the process closely.
7. Завршување: Once the process is complete, wait for the laser to stop and fumes to clear before removing the material.

Одржување

Regular maintenance ensures the longevity and performance of your engraver:

• Исчистете го објективот: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain optimal laser focus and power. The S30 features a replaceable lens for easy maintenance.
• Clean the Work Area: Remove debris and dust from the honeycomb workbed and surrounding areas after each use.
• Lubricate Rails: Apply a small amount of lubricant to the linear guide rails periodically to ensure smooth movement of the laser module.
• Проверете ги врските: Редовно проверувајте ги сите кабелски врски за лабавост или оштетување.

Решавање проблеми

Вообичаени проблеми и нивни решенија:

Спецификации

• Модел: xxl-S30 5W
• Ласерска излезна моќност: 5W
• Област на гравирање: 400mm x 400mm (Expandable to 935mm x 400mm or 935mm x 905mm with extension kits)
• Ласерски фокус: 0.06мм x 0.06мм
• Linear Guide Accuracy: 0.005 мм
• Матична плоча: Latest 32-bit with Air-Assist automatic control
• Поврзување: USB, Bluetooth, SD Card (offline printing)
• Поддржан софтвер: LightBurn, LaserGRBL, Benbox, GrblController, LiteFire
• Поддржани оперативни системи: Виндоус, МАК
• Поддржано File Формати: NC, BMP, JPG, PNG, DXF, etc.
• Димензии на производот: 18.11 x 18.11 x 6.69 инчи
• Тежина на ставката: 14.17 фунти
• Производител: SCULPFUN
• Земја на потекло: Кина
• Прво достапен датум: 9 јули 2024 година

Гаранција и поддршка

For warranty information and technical support, please refer to the official SCULPFUN webлокација или контактирајте го вашиот продавач. Чувајте ја сметката како доказ за купување за гаранциски барања.

SCULPFUN Official Store: Visit the SCULPFUN Store on Amazon