Упатство за користење на преносен мерач на трансмисија за затемнување на прозорци Linshang LS162 / LS162A

1. Производот завршиview

The Linshang LS162 and LS162A are advanced portable meters designed for precise measurement of optical properties of various transparent materials, including window tint films, solar films, and glass. These devices provide instant readings for Visible Light Transmittance (VLT), Ultraviolet Rejection (UVR), and Infrared Rejection (IRR), making them essential tools for automotive, architectural, and quality control applications.

2. Клучни карактеристики

• Компактен и пренослив дизајн: Small size for easy carrying and on-the-go use.
• Мерење со повеќе параметри: Simultaneously measures Visible Light Transmittance (VLT), UV Rejection (UVR) at 365nm, and IR Rejection (IRR) at 940nm (LS162) or 1400nm (LS162A).
• 8mm Test Aperture: Suitable for testing various materials including solar films, tinted glass, and side windows.
• Едноставна операција: Instant measurement and display of results.
• Data Lock Function: Allows locking of displayed data after removing the tested material for convenient recording.
• Dynamic Self-Calibration: Ensures data stability and accuracy during testing.
• Ниска потрошувачка на енергија: Енергетски ефикасен дизајн.

3. Поставување

3.1 Отпакување

Carefully remove the LS162/LS162A meter and all accessories from the packaging. Verify that all components listed in the packaging list are present.

3.2 Инсталација на батерија

The device requires 1 Lithium Metal battery (included). Locate the battery compartment, typically on the side or back of the unit. Insert the battery, ensuring correct polarity. Close the battery compartment securely.

3.3 Вклучување/исклучување

Press the 'ON/Hold' button to power on the device. The display will illuminate, showing the measurement parameters. To power off, press and hold the 'ON/Hold' button until the display turns off.

4. Упатства за работа

4.1 Преземање на мерење

1. Осигурајте се дека мерачот е вклучен.
2. Insert the material (e.g., window film, glass) into the 8mm test aperture. Ensure the material is fully inserted and flat within the slot.
3. The meter will instantly display the VLT (Visible Light Transmittance), UVR (UV Rejection), and IRR (IR Rejection) values on the screen.

4.2 Data Lock Function

To lock the displayed measurement data, press the 'ON/Hold' button briefly while the material is still in the test aperture. The 'HOLD' indicator will appear on the screen. You can then remove the material, and the readings will remain on the display until the button is pressed again or the device is powered off.

4.3 Dynamic Self-Calibration

The LS162/LS162A features dynamic self-calibration, which aids in maintaining data stability and accuracy during continuous testing. No manual calibration is typically required for standard operation.

4.4 Разбирање на читањата

• VLT (Visible Light Transmittance): Го означува процентотtage of visible light that passes through the material.
• UVR (UV Rejection): Го означува процентотtage of ultraviolet light (at 365nm) that is blocked by the material.
• IRR (IR Rejection): Го означува процентотtage of infrared light (at 940nm for LS162, 1400nm for LS162A) that is blocked by the material.

4.5 Видео демонстрација на производот

5. Одржување

• Чистење: Use a soft, dry cloth to clean the meter's exterior. Do not use abrasive cleaners or solvents. Keep the test aperture free of dust and debris.
• Складирање: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. When not in use for extended periods, remove the battery to prevent leakage.
• Ракување: Avoid dropping the meter or subjecting it to strong impacts, as this may damage internal components.

6 Смена на проблеми

• Без дисплеј/напојување: Проверете дали батеријата е правилно инсталирана и дали е доволно наполнета. Заменете ја батеријата доколку е потребно.
• Неточни читања: Ensure the test aperture is clean and free of obstructions. Verify that the material is inserted correctly and flat. The device performs dynamic self-calibration, but if issues persist, contact customer support.
• Замрзнување на екранот: If the display freezes, try pressing the 'ON/Hold' button to release the data lock. If it remains frozen, power off the device and restart it.

7. Спецификации

8. Гаранција и поддршка

For warranty information, technical support, or service inquiries, please contact the manufacturer, Shenzhen Linshang Technology Co., Ltd. Refer to the warranty card included in your product packaging for specific terms and conditions. Additional protection plans may be available for purchase separately.