1. Вовед
Thank you for choosing the ATOMSTACK A6 Ultra 6W Laser Engraver. This manual provides essential information for the safe and effective operation, setup, and maintenance of your device. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The ATOMSTACK A6 Ultra is a high-precision laser engraving and cutting machine designed for various materials, featuring a 6W optical laser output and a unibody frame for ease of use.
2. Информации за безбедност
Operating a laser engraver involves potential risks. Adhere to all safety guidelines to prevent injury or damage to the equipment.
2.1 Општи безбедносни мерки на претпазливост
- Заштита на очите: Always wear appropriate laser safety goggles when the laser is operating. The device includes a protective shield, but additional eye protection is recommended.
- Вентилација: Работете со граверот во добро проветрена просторија за да ги отстраните испарувањата и чадот што се создаваат за време на гравирањето и сечењето.
- Опасност од пожар: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation.
- Компатибилност на материјали: Гравирајте или сечете само материјали што се означени како безбедни за ласерска обработка. Избегнувајте материјали што произведуваат токсични испарувања или се многу рефлективни.
- Деца и домашни миленици: Keep children and pets away from the laser engraver at all times. The protective cover helps prevent accidental exposure to the laser point.
- Итен прекин: Запознајте се со локацијата и работата на копчето за итно сопирање.
- Напојување: Use only the provided power adapter. Ensure the power supply meets the specified voltagбарања.
2.2 Интегрирани безбедносни карактеристики
- Laser Protective Cover: The device is equipped with an orange protective cover that filters laser light, reducing the need for additional eyewear for observers and preventing pets from seeing the laser spot.
- Auto Laser Shut-off: The enclosure features two interlocks that automatically shut off the laser when the cover is opened during operation.
- Ограничи прекинувачи: Four-direction limit switches provide enhanced safety by defining the operational boundaries of the laser module.
- Position Movement Protection & Fire Detection: The system includes features to detect abnormal movement and potential fire hazards, enhancing operational safety.
Слика 2.1: A visual representation of the ATOMSTACK A6 Pro's comprehensive safety features, including mechanisms for position movement protection, fire detection, double-layer eye protection, automatic laser shut-off when the cover is open, and four-direction limit switches for enhanced operational safety.
3. Содржина на пакетот
Проверете дали сите артикли се присутни во вашиот пакет:
- 1 x ATOMSTACK A6 Ultra Laser Engraving Machine
- 1 x B3 Dust Cover
- 1 x H2 Base Kit
- 1 x Power Adapter (100-240V AC, 50/60HZ input; 24V 5A output)
- 1 x USB кабел
- 1 x Упатство за употреба (овој документ)
- Necessary assembly tools and accessories (e.g., screws, wrenches)
4. Спецификации
| Карактеристика | Спецификација |
|---|---|
| Бренд | АТОМАСТЕК |
| Модел | A6 Ultra (A6 Pro) |
| Големина на гравирање | 365 x 305 mm |
| Total Machine Power | 50 W |
| Optical Laser Output Power | 5-6W |
| Ласерска бранова должина | 455 5 nm |
| Ласерска точка | 0.05 x 0.05 mm |
| Режим на фокусирање | Fixed focus laser (no focusing required) |
| Оперативен софтвер | LaserGRBL, LightBurn |
| Поддржани оперативни системи | Windows, Linux, macOS |
| Поддржано File Формати | JPG, JPEG, SVG, PNG, BMP, PDF, G-Code, DXF |
| Начин на пренос на податоци | USB, APP |
| Влез на енергија | 100-240V AC, 50/60HZ |
| Излезна моќност | 24V 5A |
| Сертификати | CE, FCC, RoHS, FDA, PSE |
| Димензии на производот (Д x Ш x В) | 60 x 17 x 60 cm |
| Тежина на производот | 7.5 кг |
| Број на модел | T-A6UH2 |
5. Поставување
The ATOMSTACK A6 Ultra features a unibody frame design, significantly simplifying the setup process. Most components are pre-assembled, allowing for quick deployment.
5.1 Почетно склопување
- Отпакувај: Внимателно отстранете ги сите компоненти од пакувањето.
- Позиционирање: Place the engraver on a stable, level surface in a well-ventilated area.
- Поврзете напојување: Plug the power adapter into the engraver and then into a suitable power outlet.
- Поврзување со компјутер (опционално): If using a computer for control, connect the engraver to your computer via the provided USB cable.
- Инсталирајте софтвер: Install the recommended operating software (LaserGRBL or LightBurn) on your computer. Refer to the software's documentation for installation instructions.
Слика 5.1: A user setting up the ATOMSTACK A6 Pro laser engraver, highlighting its unibody frame design that requires no complex installation, allowing for immediate use after unboxing.
Слика 5.2: The ATOMSTACK A6 Pro laser engraver featuring its integrated camera for precise positioning, alongside a screenshot of the LightBurn software interface demonstrating its use.
6. Упатства за работа
This section outlines the basic steps for operating your ATOMSTACK A6 Ultra laser engraver.
6.1 Preparing for Engraving/Cutting
- Вклучување: Turn on the main power switch of the engraver.
- Стартување на софтвер: Open LaserGRBL or LightBurn software on your computer.
- Поставување материјал: Place the material to be engraved or cut onto the working bed. Ensure it is flat and securely positioned.
- Фокусирање: The A6 Ultra features a fixed-focus laser, eliminating the need for manual focusing.
- Design Import: Увезете го вашиот дизајн file (JPG, JPEG, SVG, PNG, BMP, PDF, G-Code, DXF) into the software.
- Поставки за параметри: Adjust laser power, speed, and passes according to the material type and desired effect. Refer to material testing guides for optimal settings.
- Позиционирање: Use the software's positioning features, potentially utilizing the built-in camera for precise alignment of your design on the material.
6.2 Стартување со работа
- Безбедносна проверка: Ensure all safety precautions are in place, including wearing safety goggles and confirming proper ventilation.
- Започни ја работата: Initiate the engraving or cutting process from the software.
- Следење: Continuously monitor the machine during operation. Be prepared to use the emergency stop if any issues arise.
- Завршување: Once the job is complete, the laser will stop. Wait for any smoke or fumes to clear before opening the protective cover and removing the material.
6.3 Компатибилност на материјалите
The ATOMSTACK A6 Ultra is compatible with a wide range of materials for engraving and cutting:
- Wood (Basswood, Pine wood, Paulownia, Bamboo)
- Акрилик
- Кожа
- Хартија, картон
- Ткаенина
- Some plastics (ensure they do not produce toxic fumes)
Always perform small test engravings on new materials to determine optimal settings and ensure safe processing.
Слика 6.1: Приказ на сликаasing the ATOMSTACK A6 Pro laser engraver's versatility in processing different materials, including basswood, acrylic, pine wood, paulownia, bamboo, and leather, suitable for both cutting and engraving.
7. Одржување
Редовното одржување обезбедува долготрајност и оптимални перформанси на вашиот ласерски гравер.
- Чистење на објективот: Periodically clean the laser lens with a specialized lens cleaning solution and a lint-free cloth. A dirty lens can reduce laser power and engraving quality.
- Cleaning the Engraving Bed: Remove debris and dust from the engraving bed after each use. A clean bed helps maintain consistent engraving results.
- Подмачкување: Check the guide rails and moving parts for smooth operation. Lubricate as needed with appropriate lubricants to prevent friction and wear.
- Ажурирања на фирмверот: Check the ATOMSTACK official website for any available firmware updates for your device to ensure you have the latest features and bug fixes.
- Заштитна обвивка: Keep the B3 Dust Cover clean to maintain visibility and ensure its protective properties. The integrated 7500RPM fan helps with efficient ventilation and dust removal.
Слика 7.1: The ATOMSTACK A6 Pro laser engraver enclosed within its protective cover, illustrating benefits such as noise reduction, fire resistance, efficient ventilation, and dust protection for a safer and cleaner engraving experience.
8 Смена на проблеми
Овој дел се однесува на вообичаени проблеми со кои може да се соочите и нуди потенцијални решенија.
| Проблем | Можна причина | Решение |
|---|---|---|
| Ласерот не пука | Power not connected; Emergency stop engaged; Software error; Protective cover open. | Check power connections; Release emergency stop; Restart software/computer; Ensure protective cover is fully closed. |
| Лош квалитет на гравирање | Incorrect laser settings (power/speed); Dirty lens; Material not flat; Incorrect focus (though A6 Ultra is fixed focus, ensure material is at correct height). | Adjust laser power/speed in software; Clean laser lens; Ensure material is flat; Verify material height. |
| Машината не се поврзува со компјутерот | USB cable issue; Driver not installed; Software not recognizing device. | Try a different USB port/cable; Install necessary drivers; Restart software/computer; Check device manager for recognition. |
| Unexpected movement or stopping | Loose cables; Obstruction on rails; Software command error; Limit switch triggered. | Check all cable connections; Clear any obstructions; Restart job; Inspect limit switches for damage or obstruction. |
9. Гаранција и поддршка
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. ATOMSTACK products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support, troubleshooting assistance beyond this manual, or inquiries about spare parts, please contact ATOMSTACK customer service through their official website or the contact information provided with your product. When contacting support, please have your model number (A6 Ultra / T-A6UH2) and purchase details ready.
