1. Вовед
Welcome to the world of high-fidelity audio with your new Pro-Ject Debut EVO 2 Audiophile Turntable. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity. Please read through these instructions carefully before first use.
2. Инструкции за безбедност
За да спречите оштетување или повреда, почитувајте ги следниве безбедносни мерки на претпазливост:
- Always disconnect the turntable from the power supply before cleaning or performing any maintenance.
- Keep the turntable away from water, moisture, and excessive heat.
- Do not place heavy objects on the turntable or its dust cover.
- Користете го само адаптерот за напојување испорачан со уредот.
- Avoid touching the stylus (needle) directly.
- Ensure proper ventilation around the turntable.
3. Што има во кутијата
Carefully unpack all items from the packaging. Please ensure all components listed below are present:
- Плочка за деби EVO 2 Pro-Ject
- Transparent Dustcover
- Connection Cable (RCA)
- Адаптер за напојување
- Alignment Protractor
- Single Adapter (for 45 RPM records with large center holes)
- Фелт мат
- Противтежа
- Тежина против лизгање
Image: The Pro-Ject Debut EVO 2 turntable in High Gloss Black, showcasinнеговиот елегантен дизајн и главни компоненти.
4. Производот завршиview
The Pro-Ject Debut EVO 2 is an audiophile-grade turntable designed for exceptional sound reproduction and ease of use. It features a carbon fiber tonearm, electronic speed selection, and a pre-mounted Pick it MM EVO cartridge.
Клучни карактеристики:
- Next generation of the best-selling audiophile turntable.
- Pick it MM EVO cartridge, expertly crafted by Ortofon.
- 25-year spare parts availability guarantee for long-term usability.
- True Balanced Ready: Anti-magnetic 1.7kg die-cast aluminum platter supports MC cartridges.
- Built with over 30 years of Pro-Ject's experience in manual turntable development.
Главни компоненти:
| Компонента | Опис |
|---|---|
| Питер | Heavy, TPE damped, anti-magnetic aluminum platter for stable rotation and reduced resonance. |
| Тонот | 8.6-inch carbon fiber tonearm for precise tracking and minimal resonance. |
| Картриџ | Pre-mounted Pick it MM EVO moving magnet cartridge for vibrant sound. |
| Мотор | Electronically controlled DC motor with belt drive for accurate speed. |
| Нозете | Adjustable, damped feet for isolation from vibrations. |
Слика: Детална view of the carbon fiber tonearm and the pre-mounted Pick it MM EVO cartridge.
Image: The tonearm's counterweight and anti-skating weight, crucial for proper tracking.
Image: The heavy aluminum platter and the belt drive system, ensuring stable rotation.
Product Introduction Video:
Video: An official introduction to the Pro-Ject Debut EVO 2 turntable, highlighting its design and features.
5. Поставување
5.1 Отпакување
Carefully remove the turntable and all accessories from the packaging. Retain the original packaging for future transport or storage.
5.2 Поставување
Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure there is adequate space for the dust cover to open fully.
5.3 Собрание
- Place the platter onto the sub-platter.
- Carefully loop the drive belt around the sub-platter and the motor pulley.
- Install the dust cover by inserting its hinges into the designated slots at the rear of the plinth.
5.4 Cartridge Alignment
The Pick it MM EVO cartridge comes pre-mounted and aligned from the factory. Fine adjustments can be made using the included alignment protractor if necessary, following the protractor's instructions.
5.5 Tracking Force Adjustment
- Carefully remove the stylus guard.
- Balance the tonearm by adjusting the counterweight until the tonearm floats freely and horizontally.
- While holding the counterweight steady, rotate the tracking force scale ring until the '0' mark aligns with the line on the tonearm.
- Rotate the entire counterweight (including the scale ring) counter-clockwise to set the recommended tracking force for the Pick it MM EVO cartridge, which is typically 1.8g. Refer to the cartridge manufacturer's specifications for precise values.
5.6 Anti-Skating Adjustment
Attach the anti-skating weight's loop to the third groove of the anti-skating stub on the tonearm. This setting is generally suitable for the pre-mounted cartridge.
5.7 Поврзување со аудио систем
- Connect the supplied RCA cable from the turntable's output jacks (L and R) to the PHONO input of your ampлафич или фоно предampживописен.
- Поврзете ја жицата за заземјување од грамофонот со терминалот за заземјување на вашиот ampпоживо/предampразладувач за минимизирање на зуењето.
- Connect the power adapter to the turntable's DC input and then to a suitable wall outlet.
Image: The rear panel showing the RCA output jacks and the ground terminal for connecting to an ampживописен.
Image: An overhead perspective of the turntable, illustrating the overall layout during the setup process.
6. Упатства за работа
6.1 Вклучување/исклучување
The turntable is powered on when the power adapter is connected to the wall outlet and the turntable. There is no separate power switch. To turn off, disconnect the power adapter.
6.2 Свирење на плоча
- Place a record on the platter. If playing a 45 RPM single with a large center hole, use the included single adapter.
- Select the desired speed (33 or 45 RPM) using the electronic speed selection switch located on the plinth.
- Подигнете ја тонераната рака користејќи ја рачката за покажување.
- Carefully position the tonearm over the desired starting groove of the record.
- Нежно спуштете го тонот со помош на рачката за покажување. Пенкалото ќе се спушти врз плочата и ќе започне репродукцијата.
6.3 Избор на брзина
The Debut EVO 2 features electronic speed selection. A switch on the plinth allows you to easily toggle between 33 1/3 RPM and 45 RPM. For 78 RPM records, a special pulley and stylus are required (sold separately), and the belt must be manually moved to the larger step on the motor pulley.
6.4 Запирање на репродукцијата
At the end of a record, or when you wish to stop playback, lift the tonearm using the cueing lever and return it to the tonearm rest. Secure the tonearm with the tonearm clip.
7. Одржување
7.1 Чистење на грамофонот
- Use a soft, lint-free cloth to wipe the plinth and dust cover. Avoid abrasive cleaners.
- The platter can be cleaned with a damp cloth. Ensure it is completely dry before re-installing.
- For the carbon fiber tonearm, use a very soft, dry brush or cloth.
7.2 Грижа за пенкалото
Regularly clean the stylus using a dedicated stylus cleaning brush or fluid. Always brush from back to front, never side to side. A clean stylus ensures optimal sound quality and extends the life of your records.
7.3 Замена на ремен
The drive belt may stretch or degrade over time. If you notice inconsistent speed or reduced performance, the belt may need replacement. Contact Pro-Ject support or an authorized dealer for a replacement belt.
8 Смена на проблеми
If you encounter issues with your turntable, consult the table below for common problems and solutions.
| Проблем | Можна причина | Решение |
|---|---|---|
| No power / No rotation | Адаптерот за напојување не е поврзан; Неисправен штекер. | Проверете ги приклучоците за напојување; обидете се со друг штекер. |
| Нема звук или низок волумен | Избран е неточен внес на amplifier; Loose RCA cables; Cartridge not properly connected. | Select PHONO input; Secure RCA connections; Check cartridge wiring. |
| Звуци од потпевнување | Ground wire not connected; Proximity to other electronics. | Connect ground wire; Move turntable away from interfering devices. |
| Искривен звук | Incorrect tracking force or anti-skating; Dirty stylus; Worn stylus. | Adjust tracking force/anti-skating; Clean stylus; Replace stylus if worn. |
| Неконзистентна брзина | Stretched or dirty drive belt; Motor issues. | Clean or replace drive belt; Contact support if motor issue persists. |
9. Спецификации
| Карактеристика | Детал |
|---|---|
| Димензии на производот | 16.4 x 12.6 x 4.5 инчи |
| Тежина на ставката | 13.2 фунти (6 килограми) |
| Број на модел | 9120129864831 |
| Производител | Аудио системи Pro-Ject |
| Технологија за поврзување | Auxiliary (RCA) |
| Материјал | Carbon Fiber (tonearm) |
| Тип на мотор | Управувано со појас |
| Вклучени компоненти | Turntable, transparent dustcover, connection cable, power adapter, alignment protractor, single adapter |
| Боја | High Gloss Black (for this specific model) |
10. Гаранција и поддршка
Pro-Ject Audio Systems products are manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Pro-Ject Audio Systems website. For technical support or service inquiries, please contact your authorized Pro-Ject dealer or distributor.
Pro-Ject offers a 25-year spare parts availability guarantee, ensuring long-term support for your turntable.
Можете да најдете повеќе информации и ресурси за поддршка на Pro-Ject Store on Amazon.
