ECOELER YWT102 Прекинувач за одбројување Упатство за употреба

Вовед

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ECOELER YWT102 Countdown Timer Switch. This in-wall timer switch is designed to automatically turn off connected loads such as lights, ceiling fans, bathroom fans, and heaters after a preset time, contributing to energy savings and convenience. It features multiple preset countdown options and a manual override function.

Image: The ECOELER Countdown Timer Switch in Ivory, shown as a 2-pack.

Карактеристики на производот

• 8 Pre-Set Options: Offers countdown settings of 1 minute, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 2 hours, or 4 hours.
• Рачно отфрлање: Allows instant ON/OFF control, overriding any active countdown.
• Заштеда на енергија: Automatically turns off loads, preventing accidental energy waste. Ideal for lights, ceiling fans, bathroom fans, and heaters.
• Едноставна операција: Features Countdown mode and Constant On mode. Select time with a button press; hold ON/OFF for 5 seconds to activate Constant On.
• LED индикатор: An always-on LED light makes the switch easy to locate in low-light conditions.
• Широка апликација: Suitable for bathrooms, closets, pantries, garages, laundry rooms, spas, and enclosed patios.
• Безбедно и доверливо: ETL listed, supporting LED/CFL, Incandescent (800W), Fluorescent (1200VA) light bulbs, and motors (1/2 HP).

Слика: Детална view of the ECOELER Countdown Timer Switch buttons and LED indicator labels, highlighting its features.

Содржина на пакетот

Upon opening your ECOELER Countdown Timer Switch package, you should find the following items:

• ECOELER YWT102 Countdown Timer Switch
• Matching Wall Plate
• Wireични навртки
• Прирачник за инструкции за инсталација

Image: The ECOELER Countdown Timer Switch, wire nuts, and face plate, along with product dimensions.

Информации за безбедност

ПРЕДУПРЕДУВАЊЕ: To prevent serious injury or death from electric shock, always turn OFF the power at the circuit breaker or fuse box before wiring. This device is intended for installation in accordance with the National Electric Code and local regulations. Use copper wires only. If you are unsure about any part of these instructions, consult a qualified electrician.

Спецификации

Инсталација

Follow these steps carefully to install your ECOELER Countdown Timer Switch. If you are not comfortable performing electrical work, please consult a qualified electrician.

Пред-инсталација

1. Исклучете го напојувањето: Locate your circuit breaker panel and turn off the power to the switch box where you will be installing the timer. Verify that the power is off using a voltagд тестер.
2. Отстранете го постоечкиот прекинувач: Carefully remove the screws holding the existing wall plate and switch. Gently pull the switch out of the wall box.
3. Идентификувајте ги жиците: Identify the wires connected to your existing switch. Typically, you will find:
   • Hot Wire: Usually black, brings power from the circuit breaker.
   • Вчитај жица: Usually black or red, carries power to the light/fan.
   • Неутрална жица: Обично бело. A neutral wire is required for this timer switch.
   • Заземјување: Usually green or bare copper.

Приклучоци за жици

Connect the wires from the wall box to the ECOELER Countdown Timer Switch as follows:

Image: Wiring diagram for the ECOELER Countdown Timer Switch, illustrating connections for Load (Red), Hot (Black), Ground (Green), and Neutral (White) wires. Note: Neutral Wire Must Be Required.

1. Поврзете го Црвена жица from the timer to the Вчитај жица from the wall box using a wire nut.
2. Поврзете го Црна жица from the timer to the Жешка жица from the wall box using a wire nut.
3. Поврзете го Бела жица from the timer to the Неутрална жица from the wall box using a wire nut.
4. Поврзете го Зелена жица from the timer to the Roundица за заземјување from the wall box using a wire nut.

Пост-инсталација

1. Carefully push all wires back into the wall box.
2. Secure the timer switch to the wall box with the provided screws.
3. Attach the new wall plate over the timer switch.
4. Вратете ја моќноста: Return to your circuit breaker panel and turn the power back ON.

Упатства за работа

The ECOELER Countdown Timer Switch offers two primary operating modes: Countdown Mode and Constant On Mode.

Режим на одбројување

To activate a countdown:

1. Press the desired time button (1 Min, 5 Min, 10 Min, 15 Min, 30 Min, 60 Min, 2 Hour, or 4 Hour).
2. The corresponding LED indicator will illuminate, and the countdown will begin.
3. The connected load (light, fan, etc.) will turn off automatically once the selected time expires.
4. To cancel a countdown manually, press the large ON/OFF button at the bottom.

Constant On Mode (Manual Override)

To keep the connected load continuously ON, bypassing the timer function:

1. Press and hold the large ON/OFF button at the bottom for more than 5 seconds.
2. The load will remain ON until the ON/OFF button is pressed again to turn it off.

Image: The ECOELER Countdown Timer Switch with its LED indicator illuminated, making it visible in a dark environment.

Одржување

The ECOELER Countdown Timer Switch requires minimal maintenance. To ensure optimal performance and longevity:

• Keep the switch and wall plate clean by wiping with a soft, damp крпа. Избегнувајте абразивни средства за чистење или растворувачи.
• Осигурајте се дека прекинувачот не е изложен на прекумерна влага или екстремни температури.
• Periodically check the connections for any signs of loosening, though this should only be done with the power turned off at the circuit breaker.

Решавање проблеми

If you encounter issues with your ECOELER Countdown Timer Switch, consider the following:

• Прекинувачот не реагира: Ensure the power is ON at the circuit breaker. Check all wire connections for tightness.
• Вчитувањето не се исклучува: Verify that the switch is not in Constant On mode (manual override). If it is, press the ON/OFF button to turn it off.
• LED индикаторот не свети: Check power supply and connections. If the switch is functioning otherwise, the LED might be faulty, but this is rare.
• Наизменична операција: Ensure all wire connections are secure. Loose connections can cause inconsistent performance.

Доколку проблемите продолжат по проверката на овие точки, контактирајте ја службата за корисници.

Гаранција и поддршка

The ECOELER Countdown Timer Switch comes with a 1 година гаранција. For any questions, technical assistance, or warranty claims, please contact ECOELER customer support. You can reach us via email at SUPPORTS@ECOELER.COM. Се стремиме да одговориме на сите прашања во рок од 24 часа.

Manufacturer: ECOELER ELECTRIC INC