1. Информации за безбедност
Please read this manual carefully before operating the iScooter IK3 Electric Scooter. Failure to follow instructions may result in injury or damage to the product.
- Always wear a helmet and protective gear (knee pads, elbow pads) when riding.
- Ensure all screws and fasteners are tightened before each ride.
- Не возете во влажни услови, на нерамни површини или ноќе без соодветно осветлување.
- Supervise children during operation. Recommended age range: 6-12 years.
- Максимален капацитет на тежина: 154 фунти.
- Avoid sudden stops or sharp turns at high speeds.
- Не менувајте го скутерот.
2. Содржина на пакетот
Проверете дали сите артикли се присутни во пакувањето:
- iScooter IK3 Electric Scooter (1)
- Полнач (1)
- Foot Support (1)
- Упатство за употреба (1)
- Assembly Tools (Allen wrenches)

Figure 2.1: The iScooter IK3 Electric Scooter and included accessories.
3. Поставување и склопување
3.1 Распакување и почетно поставување
The iScooter IK3 comes mostly pre-assembled. Follow these steps to prepare it for use:
- Внимателно извадете го скутерот и сите компоненти од пакувањето.
- Cut any zip ties securing the handlebar to the main frame.
- Locate the folding mechanism lever near the base of the handlebar stem. Push down on this lever to unfold the main frame until it locks into place.
- Extend the kickstand to support the scooter.
Video 3.1: This video demonstrates the unboxing and initial assembly steps for the iScooter IK3 electric scooter, including unfolding the frame and preparing for handlebar attachment.
3.2 Инсталација на рачката
Attach the handlebar to the stem using the provided tools:
- Align the handlebar with the top of the stem, ensuring the cables are not pinched.
- Insert the provided screws into the designated holes on the handlebar clamp.
- Use the appropriate Allen wrench to securely tighten the screws. Do not overtighten.
3.3 Прилагодување на висината на кормилото
The handlebar height can be adjusted to suit the rider's comfort:
- Locate the quick-release lever on the handlebar stem. Open the lever to loosen the stem.
- Press the small button on the side of the stem and slide the handlebar up or down to one of the three adjustable height settings.
- Once the desired height is selected, ensure the button snaps into one of the adjustment holes.
- Close the quick-release lever firmly to secure the handlebar in place.

Figure 3.1: Children riding the iScooter IK3, highlighting its suitability for ages 6-12 and adjustable features.
3.4 Преклопување и расклопување
За да го преклопите скутерот за складирање или транспорт:
- Ensure the kickstand is retracted.
- Locate the folding mechanism lever at the base of the handlebar stem. Push down on the lever.
- Gently fold the handlebar stem downwards until it clicks into place, securing it to the rear fender.
To unfold, reverse the steps: push down the lever, raise the handlebar stem until it locks, and then extend the kickstand.
4. Упатства за работа
4.1 Вклучување/исклучување
To power on the scooter, press and hold the power button on the LED display for approximately 3 seconds until the display illuminates. To power off, press and hold the power button again for 3 seconds.
4.2 режими на брзина
The iScooter IK3 features 3 adjustable speed settings:
- Gear E (Beginner): До 3 mph
- Gear N (Normal): До 6 mph
- Gear S (Sport): До 10 mph
To switch between speed modes, short press the power button while the scooter is on. The LED display will indicate the current speed mode (E, N, or S). The display also shows battery life and current speed.

Figure 4.1: The LED Digital Display provides real-time information on speed, battery level, and speed mode.
4.3 Lights Control
The scooter is equipped with colorful ambient lights for enhanced visibility and fun. To turn the lights on or off, press and hold the light button located near the power button on the handlebar.

Figure 4.2: Colorful ambient lights enhance visibility and add to the riding experience.
4.4 Систем за сопирање
The iScooter IK3 features a dual braking system for reliable stopping power:
- Електронска сопирачка: Located on the handlebar, this electronic brake provides responsive stopping.
- Ножна сопирачка: A traditional footbrake located on the rear fender allows for additional control and stopping force. Press down on the rear fender with your foot to engage. When the footbrake is applied, the LED lights on the deck turn red as a warning.

Figure 4.3: The e-brake on the handlebar provides quick and easy stopping.
Video 4.1: This short video showcases the iScooter IK3 electric scooter in action, demonstrating its features and smooth operation.
Video 4.2: This video highlights the dual braking system, magnetic charging, and LED display for enhanced safety and user experience.
5. Работа на полнење
The iScooter IK3 features an innovative magnetic charging design for easy and secure connection.
- Locate the magnetic charging port on the side of the scooter deck.
- Connect the magnetic charger to the port. The magnetic connection ensures proper alignment.
- Plug the charger into a standard wall outlet. The charging indicator on the charger will show the charging status.
- A full charge from 0% to 100% typically takes approximately 3 hours.
- Ensure the scooter is fully charged before its first use for optimal performance.

Figure 5.1: The magnetic charging port offers a quick, easy, and secure connection.
6. Одржување
Редовното одржување обезбедува долготрајност и безбедно работење на вашиот скутер.
- Чистење: Избришете го скутерот со рекламаamp крпа. Избегнувајте употреба на груби хемикалии или прекумерна вода.
- Гуми: The IK3 uses solid rubber wheels, eliminating the need for inflation. Regularly inspect for wear and tear.
- Сопирачки: Periodically check the functionality of both the e-brake and footbrake. Ensure they respond effectively.
- Прицврстувачи: Редовно проверувајте ги сите завртки и клинови за да се осигурате дека се затегнати. Затегнете ги по потреба.
- Складирање: Чувајте го скутерот на ладно и суво место, подалеку од директна сончева светлина и екстремни температури.
7 Смена на проблеми
Погледнете ја табелата подолу за вообичаени проблеми и нивни решенија:
| Проблем | Можна причина | Решение |
|---|---|---|
| Скутерот не се вклучува | Слаба батерија; Копчето за вклучување не е правилно притиснато | Charge the battery; Press and hold the power button for 3 seconds |
| Светлата не работат | Lights turned off; Loose connection | Press and hold the light button; Check for visible loose wires |
| Намалена брзина/моќност | Low battery; Incorrect speed mode; Overload | Charge the battery; Switch to a higher speed mode (N or S); Ensure rider weight is within limits |
| Сопирачките не реагираат | Brake mechanism issue | Inspect brake components for damage or obstruction. Contact support if issue persists. |
8. Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | iScooter |
| Име на моделот | ИК3 |
| Возрасен опсег (опис) | 6-12 |
| Ограничување на тежината | 154 фунти |
| Моќност на моторот | 150 W |
| Поставки за брзина | 3 (3/6/10 MPH) |
| Димензии на производот | 32.3"Д x 14.4"Ш x 38.8"В |
| Број на тркала | 2 |
| Материјал на тркала | Гума |
| Материјал за рамка | Алуминиум |
| Стил на сопирачки | Rear Braking (Dual Braking System: E-brake and Footbrake) |
| Време на полнење | 3 часа |
| Максимален опсег на растојание | 9 километри (приближно 5.6 милји) |
| Специјална карактеристика | LED-Display | Dual Braking System | Magnetic Charging |
9. Гаранција и поддршка
iScooter prioritizes quality and technical excellence. We offer a warranty on different parts of the scooter:
- A 360-day or 180-day warranty on different parts (refer to specific warranty card for details).
For fast and professional service, please contact our support team:
- Повикувачки центар: +1 (855) 916-2366
- Разговор во живо/е-пошта: support@iscooterglobal.com

Figure 9.1: iScooter Company Logo.