Вовед
The DYNASTY PROAUDIO TMP-1 is a professional vacuum tube microphone preamplifier designed to enhance audio signals with warmth and clarity. It features a 12AX7 vacuum tube, 48V phantom power, and a built-in limiter, making it suitable for a variety of recording and live sound applications with both condenser and dynamic microphones, as well as instruments.
Инструкции за безбедност
- Внимателно прочитајте ги сите упатства пред операцијата.
- Не го изложувајте уредот на дожд или влага.
- Не го отворајте casing. Целото сервисирање обратете се на квалификуван персонал.
- Обезбедете соодветна вентилација за да спречите прегревање.
- Use only the specified power adapter (AC 9V).
- Disconnect power before cleaning or when not in use for extended periods.
Содржина на пакетот
Проверете дали сите артикли се присутни во пакувањето:
- TMP-1 Professional Vacuum Tube Microphone Preampживописен
- Power Adapter (AC 9V)
- Упатство за употреба (овој документ)
Производот завршиview
The TMP-1 features a robust design with intuitive controls for optimal audio processing.
Оваа слика прикажува аголен view of the DYNASTY PROAUDIO TMP-1 Professional Vacuum Tube Microphone Preamplifier. The front panel with controls and indicators is visible, along with the sturdy black casing.
Оваа слика овозможува крупен план view of the TMP-1's front panel. It clearly displays the "OUTPUT LEVEL" LED indicators, "Gain Input" and "Drive" rotary knobs, and push-buttons for "Phantom Power", "Limit", "Phase", and "Gain".
This image shows the rear panel of the TMP-1, highlighting the input and output connections. It includes XLR and 1/4-inch (6.35mm) input jacks, XLR and 1/4-inch (6.35mm) output jacks, and the AC 9V power input.
Контроли и индикатори на предниот панел
- OUTPUT LEVEL LEDs: Indicators for signal level (-10, -5, 0, +3, +6dB Peak).
- Gain Input Knob: Adjusts the input gain from minimum to maximum.
- Копче за погон: Controls the amount of tube saturation/drive.
- Phantom Power Button (ON/OFF): Активира/деактивира фантомско напојување од 48V за кондензаторски микрофони.
- Limit Button (ON/OFF): Engages/disengages the built-in limiter to prevent clipping.
- Phase Button (Reverse/Normal): Reverses the phase of the input signal.
- Gain Button (+20dB/Normal): Provides an additional +20dB gain boost.
Врски на задниот панел
- INPUT (XLR & 1/4-inch): Balanced XLR and unbalanced 1/4-inch (6.35mm) inputs for microphones or instruments.
- OUTPUT (XLR & 1/4-inch): Balanced XLR and unbalanced 1/4-inch (6.35mm) outputs for connecting to mixers, audio interfaces, or other audio devices.
- Наизменична струја 9V: Power input for the included AC adapter.
Поставување
- Поврзување за напојување: Connect the supplied AC 9V power adapter to the "AC 9V" input on the rear panel of the TMP-1, then plug the adapter into a suitable power outlet.
- Влезна врска:
- For microphones: Connect your microphone to either the XLR or 1/4-inch INPUT jack on the rear panel.
- For instruments: Connect your instrument (e.g., guitar, bass) to the 1/4-inch INPUT jack.
- Излезна врска: Connect the TMP-1's XLR or 1/4-inch OUTPUT to your mixer, audio interface, or recording device's input.
- Почетни поставки: Before powering on, ensure the "Gain Input" and "Drive" knobs are set to their minimum positions. Ensure "Phantom Power" is OFF unless using a condenser microphone.
This image shows the TMP-1 preamplifier with various audio cables connected to its input and output jacks, demonstrating a typical setup.
Упатства за работа
Вклучување
Once all connections are made, power on the TMP-1. The "Power" LED on the front panel will illuminate.
Користење на Phantom Power
If you are using a condenser microphone, press the Фантомска моќност button to activate 48V phantom power. The corresponding LED will light up. Warning: Do not activate phantom power when using dynamic microphones or ribbon microphones, as this can cause damage.
Прилагодување на влезната добивка
Полека свртете го Gain Input knob clockwise to increase the input signal level. Monitor the "OUTPUT LEVEL" LEDs. Aim for the signal to primarily light up the -5 and 0 dB LEDs during normal operation, with occasional peaks into the +3 dB LED. Avoid consistently hitting the +6dB Peak LED, which indicates clipping.
Applying Drive (Tube Saturation)
На Вози knob controls the amount of tube saturation. Turn it clockwise to add warmth and harmonic richness to your signal. Experiment with this control to find the desired sonic character.
Using the Limiter
Притиснете го Ограничување button to engage the built-in limiter. This helps prevent signal peaks from exceeding a certain level, protecting your recording equipment from clipping and providing a more consistent output level.
Фазно превртување
На Фаза button allows you to reverse the phase of the input signal. This can be useful in multi-microphone setups to correct phase cancellation issues or for creative effects.
Additional Gain Boost
If your input signal is very low, you can press the Добивка button to apply an additional +20dB gain boost. Use this judiciously to avoid introducing unwanted noise or distortion.
This image shows a close-up of a glowing vacuum tube, representing the 12AX7 tube inside the TMP-1 that provides its characteristic warmth.
This image features a professional condenser microphone in a studio environment, illustrating the type of microphone that benefits from the TMP-1's phantom power and preampзаживување
This image shows hands playing a bass guitar, demonstrating the TMP-1's versatility in handling instrument-level signals.
Одржување
- Чистење: Користете мека, сува крпа за чистење на надворешноста на уредот. Не користете течни средства за чистење или растворувачи.
- Складирање: Чувајте го уредот на ладно и суво место, подалеку од директна сончева светлина и екстремни температури.
- Замена на цевка: The 12AX7 vacuum tube has a finite lifespan. If you notice a degradation in sound quality or increased noise over time, the tube may need replacement. This should be performed by qualified service personnel.
Решавање проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Нема моќ | Power adapter not connected; faulty outlet; faulty adapter. | Check power connections; try a different outlet; test adapter if possible. |
| Нема излез на звук | Incorrect cable connections; gain too low; phantom power not engaged for condenser mic; faulty cable. | Verify all input/output cables are securely connected; increase Gain Input; activate Phantom Power for condenser mics; try different cables. |
| Искривен звук | Gain too high (clipping); faulty tube; incorrect impedance. | Reduce Gain Input; check OUTPUT LEVEL LEDs for clipping; if distortion persists, consult service for tube inspection; ensure proper impedance matching. |
| Брмчење или бучава | Ground loop; faulty cables; interference from other electronics. | Use balanced cables; try isolating power; move unit away from other electronic devices; check for faulty cables. |
Спецификации
- Модел: TMP-1
- Тип на цевка: 12AX7 Vacuum Tube
- Фантом моќ: +48V (се преклопува)
- Влезови: XLR Balanced, 1/4-inch (6.35mm) Unbalanced
- Излези: XLR Balanced, 1/4-inch (6.35mm) Unbalanced
- Напојување: AC 9V (included adapter)
- Димензии на производот: 9.5 x 6 x 3.5 инчи (24.13 x 15.24 x 8.89 см)
- Тежина на ставката: 2.6 фунти (1.18 кг)
- Производител: Dynasty Proaudio
- Прво достапен датум: 19 август 2024 година
Гаранција и поддршка
For warranty information and technical support, please contact DYNASTY PROAUDIO directly.
Visit the official DYNASTY PROAUDIO Store on Amazon for more information: DYNASTY PROAUDIO Store
Ве молиме чувајте го вашиот доказ за купување за барањата за гаранција.
