Audio Array AM-W20 Magnetic Wireless Lapel Microphone Set Instruction Manual

1. Производот завршиview

The Audio Array AM-W20 is a magnetic wireless lapel microphone set designed for high-fidelity audio recording. It features one-touch smart noise reduction, 48KHz/24Bit Hi-fi recording capabilities, a 50-meter wireless range, and an 800mAh battery providing up to 48 hours of operation with the charging case. This microphone is suitable for various applications including vlogging, podcasting, and streaming.

Image: The Audio Array AM-W20 Magnetic Wireless Lapel Microphone Set, including the transmitter, receiver, and charging case.

Клучни карактеристики:

• Снимање со висока верност: 48kHz/24bit audio capture with a 70dB signal-to-noise ratio.
• Smart Noise Reduction: One-touch activation for clear voice recordings in noisy environments.
• Проширен безжичен опсег: Up to 50 meters (164 feet) of uninterrupted working range.
• Долг век на батеријата: До 4 часа со едно полнење и до 48 часа со футролата за полнење.
• Универзална компатибилност: Supports iOS (with Type-C to Lightning adapter) and Android devices (Type-C/USB-C ports) with OTG support.
• Дизајн со магнетна штипка: Allows for versatile and secure positioning.

Image: Visual representation of the AM-W20's key features, including compatibility, magnetic clip, wireless technology, audio quality, range, battery life, and noise cancellation.

2. Упатства за поставување

2.1 Почетно спарување и поврзување

The Audio Array AM-W20 system is pre-paired at the factory for immediate use. No manual pairing is required for initial setup.

1. Полнете ги уредите: Ensure both the transmitter (TX) and receiver (RX) are fully charged using the provided charging case.
2. Поврзете го ресиверот: Plug the receiver (RX) into the Type-C or USB-C port of your recording device (smartphone, tablet, etc.). For iOS devices, use the included Type-C to Lightning adapter.
3. Вклучување на предавателот: Take the transmitter (TX) out of the charging case. It will automatically power on and connect to the receiver.
4. Потврдете ја врската: A solid indicator light on both the transmitter and receiver typically signifies a successful connection.

Image: Visual guide demonstrating the three-step plug-and-play connection process: 1. Plug in the receiver, 2. Turn on the transmitter, 3. Devices are connected.

2.2 Device Compatibility and OTG Function

The AM-W20 is compatible with a wide range of devices, including iPhones, iPads, and Android smartphones/tablets with Type-C or USB-C ports. OTG (On-The-Go) support is essential for Android devices.

• iOS уреди: Use the provided Type-C to Lightning adapter.
• Уреди со Android: Ensure your device supports OTG. Some Android smartphones require you to manually enable the OTG function in their settings for external microphones to work correctly.

Image: Illustration of the AM-W20's broad compatibility with various mobile devices and applications.

Image: Guide for Android users on enabling OTG and configuring the 'Open Camera' app for external microphone use.

3. Упатства за работа

3.1 Вклучување/исклучување

The transmitter (TX) automatically powers on when removed from the charging case. To manually power on or off, press and hold the power button on the transmitter.

3.2 Noise Cancellation (ANC Mode)

The AM-W20 features a smart noise reduction function to minimize background interference.

• Активирање: Press the yellow button on the transmitter once to activate noise cancellation. A green indicator light will illuminate on the transmitter.
• Деактивирање: Press the yellow button again to deactivate noise cancellation.
• Автоматско активирање: Noise cancellation is active automatically when the transmitter is turned on.

Image: The AM-W20 transmitter highlighting the yellow button for one-tap noise cancellation.

3.3 Функција за исклучување

To temporarily mute the microphone during recording:

• Активирање/Деактивирање: Double-tap the power button on the transmitter.

Image: Explanation of Audio Modes, showing single tap for ANC and double tap for Mute.

3.4 Позиционирање на микрофонот

The AM-W20 features a magnetic clip for flexible and secure attachment.

• Магнетен додаток: Use the magnetic clip to attach the microphone to clothing or other surfaces.
• Оптимално поставување: For best audio quality, position the microphone approximately 6-8 inches (15-20 cm) below your mouth, centered on your chest. Avoid placing it directly under your chin or too close to your mouth to prevent plosives and distortion.

Image: Demonstrates various ways to wear the microphone, including magnetic attachment, necklace style, and traditional clip.

4. Одржување

4.1 Charging the Microphone Set

The AM-W20 microphone set is powered by an internal rechargeable battery. The charging case provides extended battery life.

• Живот на батеријата на предавателот: До 4 часа со едно полнење.
• Total Battery Life with Case: До 48 часа.
• Полнење: Place the transmitter and receiver into the charging case. Connect the charging case to a power source using a standard USB-C cable. The indicator lights on the case will show the charging status.

Image: Visual display of the AM-W20's battery performance, indicating 4 hours of use per charge and 48 hours with the charging case.

4.2 Чистење и чување

• Чистење: Use a soft, dry cloth to clean the microphone and charging case. Avoid using liquids or abrasive cleaners.
• Складирање: Store the microphone set in its charging case in a cool, dry place away from direct sunlight and extreme temperatures.

5 Смена на проблеми

If you encounter issues with your Audio Array AM-W20, refer to the following common troubleshooting steps:

• Microphone Disconnects:
  • Осигурајте се дека приемникот е безбедно поврзан со вашиот уред.
  • Check the battery level of both the transmitter and receiver.
  • Verify that there are no significant obstacles or sources of interference within the 50-meter range.
  • For Android devices, confirm that the OTG function is enabled in your phone's settings.
• Poor Audio Quality / Disturbance / Shrieking Sound:
  • Откажување бучава: Ensure noise cancellation is activated (green light on TX). If recording in extremely noisy environments, some residual noise may still be present.
  • Поставување на микрофонот: Avoid placing the microphone too close to your mouth or directly under your chin. Optimal placement is typically 6-8 inches below the mouth.
  • Јачина на снимање: If experiencing a shrieking sound, the input volume might be too high. Adjust the recording volume settings on your device if possible.
  • Пречки: Држете се подалеку од други безжични уреди или силни електромагнетни полиња што можат да предизвикаат пречки.
• Проблеми со полнење:
  • Ensure the USB-C charging cable is fully inserted into both the charging case and the power adapter.
  • Пробајте друг USB-C кабел и адаптер за напојување за да исклучите неисправна дополнителна опрема.
  • Check for any debris in the charging ports of the case or devices.
• No Sound Recording (Android):
  • Enable OTG in your phone's settings.
  • Use a third-party camera app like 'Open Camera' and ensure 'External mic' is selected as the audio source in its settings.

6. Спецификации

7. Гаранција и поддршка

For product support, technical assistance, or warranty inquiries, please contact Audio Array customer service using the information below:

• Телефон: +91 9372146440
• Е-пошта: support@audioarray.in

Image: Audio Array customer support details, including phone number and email for assistance.

Ве молиме задржете го доказот за купување за какви било гаранциски побарувања.