Упатство за употреба на KEF Q7 Meta звучник на подот

1. About Your KEF Q7 Meta Speaker

The KEF Q7 Meta is a high-fidelity floorstanding speaker engineered to deliver impactful bass and exceptional sonic clarity. It incorporates KEF's advanced 12th generation Uni-Q® driver array with Metamaterial Absorption Technology (MAT™) for detailed and lifelike sound reproduction. Complementing this, two 6.5-inch hybrid aluminum bass drivers provide a deep and immersive audio experience suitable for both music and movies.

Figure 1: KEF Q7 Meta Floorstanding Speaker (Black)

Клучни карактеристики:

• Metamaterial Absorption Technology (MAT™): Absorbs 99% of unwanted sound from the rear of the driver, significantly reducing distortion for purer, more natural sound.
• 12th Generation Uni-Q® Driver Array: Acts as a single point source to disperse sound evenly, creating an immersive and cohesive soundstage with enhanced clarity.
• Refined Crossover: Ensures seamless integration between all speaker components, optimized for precise signal path and superior performance.
• Hybrid Bass Driver Design: Provides stiffness for piston-like movement, delivering powerful and agile bass response even at high output levels.
• Современ минималистички дизајн: Features a satin finish in various colors (Black, White, Walnut) to blend effortlessly into any interior.

Figure 2: Close-up of the Metamaterial Absorption Technology (MAT) structure, designed to absorb unwanted sound.

Слика 3: Експлодирано view illustrating the components of the KEF Uni-Q Driver Array, showcasing неговиот интегриран дизајн.

Figure 4: A speaker crossover board, a critical component for directing audio frequencies to the appropriate drivers.

Figure 5: Diagram illustrating the construction of a hybrid bass driver, designed for powerful and precise low-frequency reproduction.

2. Содржина на пакетот

Upon unpacking your KEF Q7 Meta Floorstanding Speaker, please ensure all items are present:

• KEF Q7 Meta Floorstanding Speaker (1 unit)
• Гарантна картичка

3. Поставување

3.1 Поставување звучници

Оптималното поставување на звучниците е клучно за постигнување на најдобар квалитет на звук. Разгледајте ги следниве упатства:

• Акустика на просторијата: Place speakers in a room with balanced acoustics, avoiding excessive reflections or absorption.
• Растојание од ѕидовите: Experiment with the distance from the rear and side walls to control bass response and imaging. Generally, a distance of 1-3 feet from walls is a good starting point.
• Стерео триаголник: For a stereo setup, position the speakers and your primary listening position to form an equilateral triangle.
• Внесување на прсти: Slightly angle the speakers inward towards the listening position (toe-in) to optimize the soundstagд и сликање.

Слика 6: Предна страна view of the KEF Q7 Meta Floorstanding Speaker, illustrating its full height and driver arrangement.

3.2 Врски

Connect your KEF Q7 Meta speakers to your amplifier or receiver using high-quality speaker wire. Ensure correct polarity (positive to positive, negative to negative) for optimal performance.

1. Исклучете го вашиот ampладилникот/приемникот пред да направите какви било поврзувања.
2. Strip approximately 1/2 inch (12mm) of insulation from the ends of your speaker wires.
3. Unscrew the binding posts on the back of the speaker and your ampлафикатор/приемник.
4. Insert the bare wire into the hole in the binding post, ensuring no stray strands touch other terminals.
5. Цврсто затегнете ги врзувачките столбови.
6. Repeat for all speakers, maintaining correct polarity.

Слика 7: Заден дел view of the KEF Q7 Meta speaker, highlighting the speaker wire connection terminals.

4. Ракување со звучникот

Once connected, ensure your amplifier/receiver is powered on and set to the correct input source. Adjust the volume to your preferred listening level. The KEF Q7 Meta speakers are designed to deliver a wide and accurate soundstage, allowing for an immersive listening experience.

5. Одржување

To maintain the aesthetic and acoustic performance of your KEF Q7 Meta speakers, follow these simple maintenance tips:

• Чистење: Use a soft, dry, lint-free cloth to gently wipe the cabinet surfaces. Avoid abrasive cleaners or solvents.
• Прашина: Regularly dust the speaker grilles (if installed) and drivers with a soft brush or vacuum cleaner with a brush attachment.
• Избегнувајте директна сончева светлина/топлина: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can damage the finish and internal components.

6 Смена на проблеми

If you encounter any issues with your KEF Q7 Meta speakers, refer to the following common troubleshooting steps:

• Нема звук: Check all cable connections between the speakers and your amplifier/receiver. Ensure the amplifier is powered on and set to the correct input. Verify speaker wire polarity.
• Искривен звук: Намалете ја јачината на звукот на вашиот amplifier/receiver. Check for loose connections or damaged speaker wires. Ensure your ampлафиерот не е преоптоварен.
• Нерамномерен звук: Verify speaker placement and ensure they are equidistant from the listening position. Check balance settings on your ampлафикатор/приемник.

If problems persist, consult the KEF customer support or a qualified audio technician.

7. Спецификации

8. Гаранција и поддршка

Your KEF Q7 Meta Floorstanding Speaker comes with a Limited Warranty. Please refer to the included Warranty Card for detailed terms and conditions regarding coverage and duration.

For technical assistance, product inquiries, or warranty claims, please contact KEF customer support through their official webлокацијата или контакт информациите наведени на вашата гарантна картичка.