1. Вовед
This manual provides comprehensive instructions for the Diymore Humidity and Temperature Controller Socket. This device is designed to precisely control humidity and temperature in various environments, such as incubators, terrariums, greenhouses, and storage areas. It features multiple operating modes, calibration functions, and an alarm system to maintain desired environmental conditions.
2. Информации за безбедност
Please read all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.
- Ensure the power supply matches the device's specifications (230V, 16A, max 3680W).
- Do not immerse the device or sensor in water or expose it to excessive moisture.
- Не расклопувајте или менувајте го уредот.
- Да се чува подалеку од дофат на деца.
- Исклучете го уредот од штекерот пред чистење или одржување.
- Користете само во сува, затворена средина.
3. Карактеристики на производот
The Diymore Controller Socket offers a range of features for precise environmental control:
- Четири режими на работа: Humidification, Dehumidification, Heating, and Cooling.
- Широк опсег на контрола: Humidity 20-95%RH; Temperature -10°C to 50°C (14°F to 122°F).
- Adjustable Start/Stop Values: Program connected devices to activate based on set humidity/temperature thresholds.
- Функција за калибрација: Real-time adjustment for humidity (-10~10%RH) and temperature (-9.9~9.9°C).
- Функција за аларм: Audible alarm when humidity or temperature exceeds set limits.
- Меморија на податоци: Retains all settings after a power failure.
- Функција за ресетирање: Allows restoration of factory settings.
- Button Tone Settings: Customize button feedback.
- Error Prompt Function: Provides indications for operational issues.
- °C/°F Префрлување: Лесно менувајте помеѓу температурните единици Целзиус и Фаренхајт.
Слика 3.1: Во текот наview of Diymore Controller Socket features, including humidity and temperature control, alarm functions, calibration, and memory.
4. Содржина на пакетот
Пакетот ги вклучува следните ставки:
- 1 x Diymore Humidity and Temperature Controller Socket (230V)
- 1 x External Sensor Probe
5. Производот завршиview и Димензии
Familiarize yourself with the device's components and dimensions.
Слика 5.1: Diymore Controller Socket with external sensor.
Слика 5.2: Product dimensions of the controller and sensor.
The main unit measures approximately 13.1 cm (5.11 in) in height, 6 cm (2.36 in) in width, and 3.2 cm (1.25 in) in depth. The sensor probe measures approximately 5.5 cm (2.16 in) in length and 2.3 cm (0.90 in) in width.
6. Поставување
- Отпакувај: Carefully remove the controller and sensor from the packaging.
- Поврзете го сензорот: Ensure the external sensor probe is securely plugged into the designated port on the side of the controller.
- Сензор за позиција: Place the sensor in the area where you wish to monitor and control humidity and temperature. Ensure it is not directly exposed to water or extreme conditions that could damage it.
- Приклучи се: Insert the controller's plug into a standard 230V power outlet. The display will illuminate.
- Поврзете го апаратот: Plug your humidifier, dehumidifier, heater, or cooler into the socket on the front of the controller.
7. Упатства за работа
The controller features four buttons: РЕЖИМ, ПОСТАВЕТЕ, ГОРЕ/КЛК, и ДОЛУ.
7.1. Префрлување на температурни единици (°C/°F)
За да префрлате помеѓу Целзиусови (°C) и Фаренхајтови (°F):
- Притиснете и задржете го ПОСТАВЕТЕ button for 3 seconds. The temperature unit on the display will change.
7.2. Избор на оперативен режим
The device supports four main operating modes: Humidification (HC mode), Dehumidification (HC mode), Heating (TC mode), and Cooling (TC mode). Press the РЕЖИМ button repeatedly to cycle through these modes.
Слика 7.1: Examples of the four working modes and alarm settings.
7.3. Setting Humidity/Temperature Control Values
To set the desired start and stop values for humidity or temperature:
- Притиснете го РЕЖИМ button to select either HC (Humidity Control) or TC (Temperature Control) mode.
- Притиснете го ПОСТАВЕТЕ button once. The "Start Humidity" or "Start Temperature" value will begin to flash.
- Користете го ГОРЕ/КЛК и ДОЛУ buttons to adjust the desired start value.
- Притиснете го ПОСТАВЕТЕ button again. The "Stop Humidity" or "Stop Temperature" value will flash.
- Користете го ГОРЕ/КЛК и ДОЛУ buttons to adjust the desired stop value.
- Притиснете го ПОСТАВЕТЕ button a third time, or wait a few seconds, to save the settings and exit.
Забелешка: For humidification/heating, the start value should be lower than the stop value. For dehumidification/cooling, the start value should be higher than the stop value.
7.4. Setting Alarm Function
The device can trigger an alarm if humidity or temperature goes outside a set range.
- Притиснете го РЕЖИМ button to select either HC Alarm (Humidity Alarm) or TC Alarm (Temperature Alarm) mode.
- Притиснете го ПОСТАВЕТЕ button once. The alarm threshold value will flash.
- Користете го ГОРЕ/КЛК и ДОЛУ buttons to adjust the desired alarm threshold.
- Притиснете го ПОСТАВЕТЕ button again, or wait a few seconds, to save the setting and exit.
When the measured humidity/temperature exceeds the set alarm value, the hygrostat will emit an audible alarm sound.
7.5. Функција за калибрација
To calibrate the humidity or temperature readings:
- Притиснете и задржете го ГОРЕ/КЛК button. The calibration value will appear and flash.
- Користете го ГОРЕ/КЛК и ДОЛУ buttons to adjust the calibration offset.
- Humidity correction range: -10%RH to 10%RH
- Temperature correction range: -9.9°C to 9.9°C
- Притиснете и задржете го РЕЖИМ копче за да ја зачувате калибрацијата и да излезете.
7.6. Други функции
- Меморија на податоци: The device automatically saves all setting parameters, which are retained even after a power failure.
- Функција за ресетирање: To restore factory settings, refer to the specific instructions in the full manual (if available) or contact support.
- Button Tone Settings: The device allows for customization of button sounds. Refer to the full manual for detailed instructions.
- Turn Off Alarm Sound: Specific instructions for turning off the alarm sound are typically found in the full manual.
8. Апликации
The Diymore Controller Socket is versatile and suitable for various applications requiring precise humidity and temperature control:
- Инкубатори
- Domestic Reptile Habitats
- Poultry Houses
- Mushroom Cultivation
- Glass Containers / Terrariums
- Оранжерии
- Humidifiers and Dehumidifiers
- Household and Industrial Environments
- Винарски визби
- Фрижидери
- Магацини
Слика 8.1: Diverse applications of the Diymore Controller Socket.
9. Одржување
- Чистење: Disconnect the device from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Нега на сензорот: Одржувајте го сензорот чист и без прашина или остатоци. Избегнувајте свиткување или оштетување на кабелот на сензорот.
- Складирање: If storing the device for an extended period, unplug it and store it in a dry, cool place.
10 Смена на проблеми
If you encounter issues with your Diymore Controller Socket, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Уредот не се вклучува. | Нема напојување; лабава врска. | Ensure the device is securely plugged into a live 230V outlet. Check the power outlet with another appliance. |
| Incorrect humidity/temperature reading. | Sensor dirty or damaged; calibration needed. | Clean the sensor. Perform a calibration as described in Section 7.5. Ensure the sensor is correctly positioned. |
| Поврзаниот апарат не се вклучува/исклучува. | Incorrect mode selected; start/stop values set incorrectly; appliance fault. | Verify the correct operating mode (HC/TC) is selected. Check that start and stop values are set appropriately for the desired action (e.g., start humidity lower than stop for humidification). Test the connected appliance directly. |
| Алармот се огласува неочекувано. | Alarm thresholds set too close to current conditions; actual conditions exceed thresholds. | Review and adjust the alarm threshold settings (Section 7.4). Check the actual humidity/temperature in the environment. |
| Display shows "H2" or other error prompt. | Indicates very high humidity/temperature or sensor issue. | Check environmental conditions. If conditions are normal, inspect the sensor for damage or disconnection. If the issue persists, contact customer support. |
11. Спецификации
| Број на модел | temperatuur vochtigheid |
| Display Humidity Range | 20% - 95% релативна влажност |
| Опсег на температура на екранот | -10°C до 50°C (14°F до 122°F) |
| Humidity Calibration Range | -10%RH to 10%RH |
| Опсег на калибрација на температурата | -9.9°C до 9.9°C |
| Power Supply (EU) | 230V AC, 50Hz |
| Максимално оптоварување | 16А, 3680W |
| Димензии на производот (главна единица) | 13.1 x 6.2 x 3.2 см (приближно 5.11 x 2.44 x 1.25 инчи) |
| Димензии на сензорот | 5.5 x 2.3 см (приближно 2.16 x 0.90 инчи) |
| Материјал | Пластика |
| Тип на дисплеј | LCD или LED |
| Боја | Бело |
12. Гаранција и поддршка
For warranty information or technical support, please refer to the documentation included with your purchase or contact Diymore customer service through their official website or the retailer where the product was purchased. Please have your model number (temperatuur vochtigheid) and purchase date available when contacting support.
