Sodola 24-Port 2.5Gb Easy Smart Managed PoE Switch User Manual

1. Вовед

This manual provides detailed instructions for the installation, configuration, and operation of your Sodola 24-Port 2.5Gb Easy Smart Managed PoE Switch. This device is designed to provide high-speed network connectivity and Power over Ethernet (PoE) capabilities for various network devices.

The switch features 24 2.5Gb PoE ports and 2 10G SFP+ uplink ports, offering robust performance for demanding network environments. It supports web-based management for easy configuration and monitoring.

2. Содржина на пакетот

Потврдете дека вашиот пакет ги содржи следниве ставки:

• 1 x Sodola 24-Port 2.5G Managed PoE Switch
• 1 x кабел за напојување
• 1 x Упатство за употреба (овој документ)

3. Производот завршиview

The Sodola 24-Port 2.5Gb PoE Switch is a multi-gigabit managed switch designed for high-performance networking. It offers a combination of 2.5 Gigabit Ethernet ports with Power over Ethernet capabilities and 10 Gigabit SFP+ ports for high-speed uplinks.

3.1 Клучни карактеристики

• 2.5G & 10G PoE Switch: 24x 2.5Gb PoE ports + 2x 10G SFP+ ports for high-speed network connectivity.
• IEEE 802.3bt/at/af Compliant: Ports 1-4 support up to 90W each, and ports 5-24 support up to 30W each, with an overall PoE power budget of 500W. Note: Does not support passive 24V PoE devices.
• Лесно Web Управување: Интуитивен web interface for device status monitoring and configuration of features like Link Aggregation, VLAN, QoS, Multicast, MAC, and RSTP.
• Пропусен опсег од 160Gbps: Robust switching capacity for lag-free data transfers.
• Универзална компатибилност: Compatible with various Ethernet devices such as 2.5G WiFi 6 APs, 2.5G NAS, 2.5G PCIe Adapters, and 2.5G Servers.
• 1U Rack Mounted Design: Supports 1U rack mounting and features a bilateral cooling design without a built-in fan for silent operation.

3.2 Распоред на предниот панел

Figure 1: Front Panel Layout with Port and Indicator Labels

• 1. 1G/10G or 2.5G/10G SFP+ Ports: Two ports for high-speed fiber optic uplinks.
• 2. 24x 10/100/1000M/2.5G PoE Ports: Twenty-four 2.5 Gigabit Ethernet ports with Power over Ethernet capabilities.
• 3. RESET Button: Притиснете и задржете 6 секунди за да ги вратите фабричките поставки.
• 4. LINK/ACT & PoE Indicators: LEDs indicating link status, activity, and PoE power status for each port.
• 5. SYS Indicator: Показно светло за статусот на системот.
• 6. PWR Indicator: Показно светло за напојување.

3.3 Распоред на задниот панел

Figure 2: Rear Panel Layout with Power Input and Grounding Screw

• 7. AC INPUT 100-240V: Power input for the switch.
• 8. Ground Screws: For connecting a grounding wire to ensure electrical safety.
• 9. PoE MAX Indicator: Shows the PoE power usage status (OFF: <90%, FLASHING: 90%-95%, ON: 95%-100%).

4. Поставување

Follow these steps to set up your Sodola PoE Switch:

4.1 Физичка инсталација

• Поставување на работна површина: Поставете го прекинувачот на рамна, стабилна површина. Обезбедете соодветна вентилација околу уредот.
• Монтирање на решетка: The switch supports 1U rack mounting. Use appropriate rack-mount brackets (not included unless specified) to secure the device in a standard 19-inch server rack.

Figure 3: Rack Mounting Example

4.2 Поврзување за напојување

1. Connect the provided power cord to the AC INPUT port on the rear panel of the switch.
2. Plug the other end of the power cord into a standard AC power outlet (100-240V).
3. The PWR indicator on the front panel should illuminate, indicating the switch is receiving power.

4.3 Мрежни врски

Connect your network devices to the switch using Ethernet cables. For optimal 2.5GbE speeds, use Cat6 or higher pure copper cables. Ensure all connected devices (routers, NICs, etc.) also support 2.5GbE; otherwise, network speed will default to the slowest connected device.

• PoE уреди: Connect PoE-compatible devices (e.g., IP cameras, wireless access points) to ports 1-24. These ports will automatically detect and provide power to compliant devices.
• Уреди без PoE: Non-PoE devices can also be connected to ports 1-24 for data connectivity.
• Врски за довршување: Use the 10G SFP+ ports for high-speed connections to your core network, servers, or other 10G-capable devices.

5. Упатства за работа

The Sodola PoE Switch is largely plug-and-play for basic network connectivity. Once powered on and devices are connected, it will begin forwarding data.

5.1 LED индикатори

Monitor the LED indicators on the front panel for device status:

• PWR: Solid green when the switch is powered on.
• СИС: Indicates system status. Refer to the full user manual for specific blink patterns.
• LINK/ACT (per port): Solid green when a link is established, flashing green when data is being transmitted/received.
• PoE (per port): Solid green when PoE power is being supplied to a connected device.
• PoE MAX: Indicates total PoE power usage. OFF: <90%, FLASHING: 90%-95%, ON: 95%-100%.

5.2 Ресетирање на фабрички поставки

To restore the switch to its factory default settings, press and hold the RESET button on the front panel for approximately 6 seconds. The switch will reboot with default configurations.

6. Web Управување

The switch features an easy-to-use web-based management interface for advanced configuration and monitoring.

6.1 Пристап до Web Интерфејс

1. Ensure your computer is connected to the switch via an Ethernet cable.
2. Configure your computer's IP address to be in the same subnet as the switch's default IP address (e.g., if the switch is 192.168.2.1, set your computer to 192.168.2.x, where x is not 1).
3. Отвори a web browser and enter the default IP address of the switch: 192.168.2.1
4. Внесете ги стандардните акредитиви за најавување: Корисничко име: админ, Лозинка: админ.
5. По успешно најавување, ќе пристапите до web интерфејс за управување.

Слика 4: Web Management Interface Login

6.2 Configuration Features

На web interface allows you to configure various network settings, including:

• Агрегација на линкови (LACP): Комбинирајте повеќе физички врски во една логичка врска за зголемен пропусен опсег и редундантност.
• VLAN: Создадете виртуелни локални мрежи за да ја сегментирате вашата мрежа за подобрена безбедност и перформанси.
• Квалитет на услуга (QoS): Дајте приоритет на мрежниот сообраќај за да се осигурате дека критичните апликации добиваат доволен пропусен опсег.
• Multicast (IGMP Snooping): Optimize multicast traffic delivery to reduce network congestion.
• MAC Address Management: Control access based on MAC addresses.
• RSTP (Rapid Spanning Tree Protocol): Спречете мрежни јамки и обезбедете стабилност на мрежата.
• Огледало на пристаништето: Следете го мрежниот сообраќај со испраќање копија од пакетите од еден порт до друг.
• Поддршка за Jumbo Frame: Increase data transfer efficiency for large packets.

Important: After making any configuration changes in the web interface, navigate to the 'Tools' or 'Save' section and save your settings to ensure they are retained after a power cycle.

7. Спецификации

8 Смена на проблеми

• Без моќност: Ensure the power cord is securely connected to both the switch and a working power outlet. Check the PWR LED.
• Нема линк/активност: Verify that Ethernet cables are properly connected to both the switch and the network device. Check the LINK/ACT LED for the respective port. Ensure the connected device is powered on and functioning correctly.
• Бавна брзина на мрежата: For 2.5GbE connections, ensure you are using Cat6 or higher pure copper cables and that all devices in the network path support 2.5GbE.
• PoE уредот не се вклучува: Confirm the connected device is PoE-compatible (IEEE 802.3af/at/bt). Check the PoE LED for the port. Ensure the total PoE power budget of 500W is not exceeded. Passive 24V PoE devices are not supported.
• Не може да се пристапи Web Интерфејс: Verify your computer's IP address is in the same subnet as the switch's default IP (192.168.2.1). Ensure the correct default username and password ('admin'/'admin') are used. Try resetting the switch to factory defaults if the IP address has been changed and forgotten.
• Configuration Changes Not Saved: Remember to explicitly save configurations through the web interface after making changes.

9. Одржување

• Чистење: Користете мека, сува крпа за чистење на надворешноста на прекинувачот. Не користете течни или аеросолни средства за чистење.
• Вентилација: Ensure the ventilation openings on the sides of the switch are not obstructed to allow for proper heat dissipation.
• Ажурирања на фирмверот: Периодично проверувајте ги упатствата на производителот webстраница за ажурирања на фирмверот за да се обезбедат оптимални перформанси и безбедност.

10. Гаранција и поддршка

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official Sodola webсајт. Чувајте ја вашата потврда за купување за барања за гаранција.