1. Вовед
This manual provides detailed instructions for the installation, operation, and maintenance of your Tyger Auto T2 Low Profile Soft Roll-up Tonneau Cover. Designed for durability and ease of use, this cover helps protect your truck bed cargo from the elements while maintaining a sleek appearance. Please read these instructions thoroughly before proceeding with installation or use.
2. Информации за безбедност
- Секогаш носете соодветна лична заштитна опрема, како што се ракавици и заштита за очи, за време на инсталацијата.
- Ensure the truck bed is clean and free of debris before installation to prevent damage to the cover or vehicle.
- Do not operate the vehicle with the tonneau cover improperly secured.
- Avoid placing heavy or sharp objects directly on the cover, as this may cause damage.
- Keep hands and fingers clear of moving parts when rolling or unrolling the cover.
3. Содржина на пакетот
Проверете дали сите компоненти се присутни пред да започнете со инсталацијата:
- Cover assembly (pre-assembled vinyl tarp with crossbars and front header)
- Странични шини (лево и десно)
- Монтирање clamps
- Weather seals (if applicable)
- Упатство за употреба
4. Компатибилност и соодветност
This Tyger Auto T2 Low Profile Soft Roll-up Tonneau Cover is compatible with:
- Возило: 2015-2025 Форд Ф-150
- Тип на кревет: Fleetside (Not for Stepside)
- Должина на креветот: 5.5' (67") Bed
It is crucial to confirm your truck's bed length before installation. The cover is designed to fit specific bed dimensions.

5. Поставување и инсталација
The Tyger Auto T2 Tonneau Cover features an easy, no-drilling installation process. Follow these steps for proper setup:
- Подгответе го товарниот простор на камионот: Clean the truck bed rails thoroughly to ensure proper adhesion of weather seals and secure clampинг.
- Install Front Header Seal: Apply the provided weather seal to the front bulkhead of the truck bed, ensuring a tight fit.
- Позиција на страничните шини: Place the left and right side rails onto the truck bed rails. Ensure they are aligned correctly and extend over the bed space, allowing full access to stake pockets.
- Secure Side Rails with Clamps: Use the stainless steel clamps to secure the side rails to the truck bed. Tighten the clamps evenly along the length of the rails. Note: Small holes may need to be cut in over-the-bedrail bedliners to secure clamps; under-the-bedrail bedliners do not require modification.
- Attach Cover Assembly: Place the pre-assembled cover onto the installed side rails, aligning the front header with the front of the bed. Secure the front header to the side rails using the integrated fasteners.
- Прилагодување на тензијата: The cover includes a tension system at the end of the side rails. Adjust this system to keep the vinyl tarp tight and wrinkle-free.


6. Упатства за работа
The T2 Low Profile Soft Roll-up Tonneau Cover is designed for convenient access to your truck bed.
6.1. Opening the Cover (Rolling Up)
- Ослободете ја бравата: At the tailgate end, locate and release the latch lock system.
- Detach Velcro: Gently peel back the Velcro strip along both side rails, starting from the tailgate.
- Замотајте нагоре: Carefully roll the marine-grade vinyl tarp towards the cab of the truck. The built-in horizontal crossbars will roll up with the tarp.
- Обезбедете во отворена положба: Once fully rolled, secure the cover at the back of the cab using the integrated straps or buckles to maximize access to the pickup truck bed.

6.2. Closing the Cover (Rolling Down)
- Unsecure Cover: Ослободете ги ремените или копчињата што го држат капакот во отворена положба.
- Roll Down: Slowly unroll the vinyl tarp towards the tailgate, ensuring it remains centered on the side rails.
- Secure Velcro: Press down firmly along the Velcro strips on both side rails to secure the cover.
- Вклучи го заклучувачот: At the tailgate end, engage the latch lock system to fully secure the cover.

6.3. Utilizing Bed Rail Surface
The T2's sleek low-profile design allows the cover rails to extend over the bed space, enabling full utilization of the bed rail surface and stake pockets for mounting other truck bed accessories.

7. Одржување
Regular maintenance will extend the life and appearance of your tonneau cover.
- Чистење: Wash the vinyl tarp regularly with mild soap and water. Avoid harsh chemicals or abrasive cleaners, as these can damage the vinyl. Rinse thoroughly and allow to air dry.
- Vinyl Protection: Apply a UV protectant specifically designed for vinyl to prevent fading and cracking due to sun exposure.
- Проверка на хардверот: Периодично проверувајте ги сите клamps, latches, and fasteners to ensure they are secure and functioning correctly. Tighten any loose hardware.
- Временски пломби: Check weather seals for wear or damage. Replace if necessary to maintain water resistance.
- Прилагодување на затегнатоста: Adjust the tension system as needed to keep the cover taut, especially in varying weather conditions.

8 Смена на проблеми
Еве решенија за вообичаени проблеми со кои може да се соочите:
- Cover Not Lying Flat/Wrinkled: Adjust the tension system located at the end of the side rails. Ensure the cover is properly centered and the Velcro strips are fully engaged.
- Истекување вода: Check all weather seals, especially at the front bulkhead and along the side rails. Ensure clamps are tight and the cover is properly latched at the tailgate. Minor water intrusion during heavy rain is possible with any soft cover.
- Difficulty Rolling/Unrolling: Ensure the side rails are clean and free of obstructions. Check that the latch system is fully disengaged when rolling up.
- Лабава Clamps: Periodically re-tighten all mounting clamps to ensure the side rails remain securely attached to the truck bed.
9. Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | Тајгер Авто |
| Модел | TG-BC2F6229 (TYGER T2) |
| Стил | T2 Ниско Проfile Soft Roll-Up |
| Надворешен финиш | Винил |
| Материјал | Aluminum, Stainless Steel, Vinyl |
| Тип на заклучување | Задна врата |
| Тежина на ставката | 28.8 фунти |
| Димензии на пакетот | 70 x 12 x 5.5 инчи |
| Автомобилски фит тип | Специфично одговарање на возилото |
10. Гаранција и поддршка
Овој производ е поддржан од ОГРАНИЧЕНА ЖИВОТНА ГАРАНЦИЈА for US customers. For warranty claims, technical support, or any questions regarding your Tyger Auto T2 Tonneau Cover, please contact Tyger Auto customer service directly. Refer to the product packaging or the official Tyger Auto webстраница за најактуелните информации за контакт.





