Упатство за користење на SwitchBot Smart Relay Switch 1

Производот завршиview

The SwitchBot Smart Relay Switch 1 is a compact smart relay module designed to integrate traditional electrical devices into your smart home ecosystem. It features a built-in hub with Wi-Fi and Bluetooth connectivity, making old devices smart without extensive rewiring. This device supports Matter protocol, allowing direct control through popular platforms like Alexa, Apple Home, Google Home, and SmartThings. It enables remote control, automation, and voice control for lights, fans, heating, and air conditioning, fitting most standard switch boxes and outlets.

Важни безбедносни информации

Your safety is paramount. When installing this device, always adhere to your country's standards for electrical installation. Before commencing any mounting or installation, ensure that the circuit breakers are turned off and there is no voltage present on the terminals. Only proceed with wiring once you have confirmed the absence of voltage. It is highly recommended to read this entire user guide before beginning the installation process.

This manual and any accompanying videos are for demonstrational purposes only. We strongly advise hiring a professional electrical installer to install the device. The colors of electrical wires may vary based on regional standards. Always comply with local regulations and standards.

Поставување и инсталација

The SwitchBot Smart Relay Switch 1 is designed for quick installation, typically within 10 minutes, to convert existing switches into smart ones. A neutral wire is required for installation.

Wiring Diagram and Terminals

Чекори за инсталација

Follow these steps carefully to install your SwitchBot Smart Relay Switch 1:

1. Исклучете го напојувањето: Locate the circuit breaker for the area where you will install the switch and turn off the power. Verify that the power is off using a voltagд тестер.
2. Remove the switch shell: Carefully remove the existing switch plate and shell from the wall box.
3. Disconnect existing wires: Disconnect the wires from your old switch. Note which wires are Live, Neutral, and Load.
4. Connect Load wire: Connect the Load wire (typically connected to the light fixture or appliance) to the 'O' terminal on the SwitchBot Relay Switch 1.
5. Connect Neutral wire: Connect the Neutral wire to the 'N' terminal on the SwitchBot Relay Switch 1.
6. Connect Live wire (power input): Connect the Live wire (incoming power) to the 'L' terminal on the SwitchBot Relay Switch 1.
7. Connect Live wire (switch input): Connect a Live wire from the main power line to the 'I' terminal on the SwitchBot Relay Switch 1. This provides power to the internal module.
8. Connect switch to SW terminal: Connect one wire from your physical wall switch to the 'SW' terminal on the SwitchBot Relay Switch 1.
9. Connect switch to L terminal: Connect the other wire from your physical wall switch to the 'L' terminal on the SwitchBot Relay Switch 1. This completes the circuit for the physical switch.
10. Reinstall switch shell: Carefully place the SwitchBot Relay Switch 1 and wires back into the wall box and reinstall the switch shell and plate.
11. Вклучете го напојувањето: Вклучете го напојувањето повторно кај прекинувачот.
12. Тестирајте го уредот: Use the SwitchBot app or the physical switch to confirm proper operation.

Operating the SwitchBot Smart Relay Switch 1

The SwitchBot Smart Relay Switch 1 offers multiple control options for seamless integration into your smart home.

Контрола на апликацијата

Control your appliances remotely via the SwitchBot app on your smartphone. The integrated gateway allows for convenient connection with other smart devices. If your internet connection is unavailable, you can still control the device locally using Bluetooth.

Гласовна контрола

With Matter Protocol support, the Relay Switch 1 can be directly connected to voice assistants like Alexa, Apple Home, Google Home, and SmartThings (compatible speaker required), enabling hands-free control of your devices.

Custom Smart Scenes and Automation

Create customized smart scenes to automate your home. For exampле:

• Automatically turn on lights when doors open or motion is detected (requires SwitchBot Sensor).
• Schedule lights to turn off at a preset time.
• Automate garden irrigation based on temperature and humidity by pairing with a SwitchBot Meter.

Одржување

The SwitchBot Smart Relay Switch 1 requires minimal maintenance. Ensure the device is kept clean and free from dust. Do not attempt to open or repair the device yourself. For cleaning, gently wipe the exterior with a dry, soft cloth. Avoid using liquid cleaners or abrasive materials.

Решавање проблеми

• Уредот не реагира: Ensure the power is on at the circuit breaker and the device is properly wired. Check your Wi-Fi connection and ensure the SwitchBot app is up to date. If the internet is down, try controlling via Bluetooth.
• Difficulty connecting to smart home platforms: Ensure your Matter hub (compatible speaker) is properly set up and connected to the internet. Follow the pairing instructions within the SwitchBot app and your chosen smart home platform (Alexa, Apple Home, Google Home, SmartThings).
• Physical switch not working: Verify that the physical switch is correctly wired to the 'SW' and 'L' terminals of the Relay Switch 1.
• Device not fitting in wall box: The Relay Switch 1 is compact (1.65 x 1.45 x 0.63 inches). Ensure there is sufficient space in your switch box. If needed, consult with a professional electrician for alternative installation methods or box types.

Спецификации

Гаранција и поддршка

For detailed warranty information, technical support, and frequently asked questions, please visit the official SwitchBot webлокација или директно контактирајте ја нивната служба за корисници. Зачувајте ја сметката за купување за гаранциски барања.