Tosima Window Cleaning Robot W2 User Manual

1. Вовед

The Tosima Window Cleaning Robot W2 is designed to automate the cleaning of windows and glass surfaces. It features intelligent path planning, 3800Pa suction power, and edge detection technology to ensure thorough and efficient cleaning. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device.

2. Информации за безбедност

• Always ensure the safety tether is securely attached to a fixed object before operating the robot, especially on high windows.
• Не го користете роботот на напукнати или оштетени стаклени површини.
• Ensure the power cord is properly connected and not tangled during operation.
• Држете ги рацете и лабавата облека подалеку од подвижните делови за време на работата.
• Do not expose the robot to rain or extreme weather conditions.
• Supervise the robot during its first few uses to ensure proper adhesion and operation.

3. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

Image: Components included with the Tosima W2 Window Cleaning Robot.

• Tosima Window Cleaning Robot W2
• Далечински управувач
• Cleaning Pads (12 pieces)
• Адаптер за полнење
• Кабел за напојување
• Безбедносен тетер
• Water Bottle (for cleaning solution)

4. Производот завршиview

The Tosima W2 robot features a compact design with powerful suction and two rotating cleaning pads. The remote control allows for easy operation and mode selection.

Слика: напред view of the Tosima W2 Window Cleaning Robot with its remote control and cleaning pads.

Слика: Заден дел view of the Tosima W2 Window Cleaning Robot, highlighting the cleaning pads.

5. Поставување

1. Наполнете го роботот: Connect the robot to the power adapter and allow it to fully charge before first use. The indicator light will change when charging is complete.
2. Прикачете ги влошките за чистење: Securely attach two clean microfiber cleaning pads to the bottom of the robot. Ensure they are centered and flat.
3. Connect Safety Tether: Attach one end of the safety tether to the robot and the other end to a sturdy, fixed object indoors, such as a window frame or heavy furniture. This is a critical safety measure.
4. Подгответе раствор за чистење: Lightly spray the cleaning pads with a suitable glass cleaning solution. Do not oversaturate the pads or spray directly onto the robot's body.
5. Поврзете напојување: Plug the power adapter into an electrical outlet and connect it to the robot. The robot requires continuous power during operation.

Image: The robot connected to power and ready for operation on a window.

6. Упатства за работа

1. Поставете го роботот: Hold the robot firmly against the glass surface. Press and hold the power button on the robot for 3 seconds until the suction motor engages and the robot adheres to the window.
2. Започнете со чистење: Use the remote control to select a cleaning mode or press the start button. The robot will begin its cleaning cycle using its intelligent path planning (AI 3.0) to cover the entire surface.
3. Интелигентно планирање на патеки: The robot automatically detects the edges of the window and plans an efficient cleaning route, ensuring comprehensive coverage.
4. Следете го напредокот: Observe the robot's operation. You can use the remote control to pause, resume, or manually direct the robot if needed.
5. Завршување: The robot will beep to indicate the completion of its cleaning cycle. It will remain adhered to the window until manually removed.
6. Remove the Robot: Carefully grasp the robot, press the power button to disengage suction, and remove it from the window.

Image: Operating the robot using the remote control.

Image: Illustration of the robot's intelligent path planning.

7. Одржување

Regular maintenance ensures optimal performance and longevity of your Tosima W2 robot.

• Чисти влошки за чистење: After each use, remove the microfiber cleaning pads. They are washable and reusable. Hand wash or machine wash them with mild detergent and air dry completely before reattaching.
• Clean Robot Body and Sensors: Wipe the robot's exterior with a soft, dry cloth. Ensure the sensors on the edges and bottom are clean and free of debris to maintain accurate edge detection and adhesion.
• Складирање: Чувајте го роботот на ладно и суво место, подалеку од директна сончева светлина кога не е во употреба.

Image: Microfiber cleaning pads are removable, washable, and reusable.

8 Смена на проблеми

• Robot Not Adhering:
  • Ensure the glass surface is not excessively wet or oily.
  • Check that the power cord is securely connected and the robot is receiving power.
  • Verify that the cleaning pads are properly attached and not obstructing the suction area.
• Robot Leaves Streaks:
  • Replace or clean the microfiber pads.
  • Use a fresh, appropriate glass cleaning solution.
  • Ensure the glass is not extremely dirty before starting; pre-clean if necessary.
• Robot Does Not Move or Stops Mid-Cycle:
  • Check for power interruptions or loose connections.
  • Ensure the safety tether is not snagged or pulling the robot.
  • Clean the sensors for any obstructions.
• Далечинскиот управувач не реагира:
  • Заменете ги батериите во далечинскиот управувач.
  • Погрижете се да нема пречки помеѓу далечинското и роботот.

9. Спецификации

10. Гаранција и поддршка

The Tosima Window Cleaning Robot W2 comes with a warranty of up to 24 months from the date of purchase. For any product-related inquiries, technical assistance, or warranty claims, please contact Tosima customer support.

• Поддршка за корисници: Prompt 24-hour email support is available. Refer to your purchase documentation for specific contact details or visit the official Tosima webсајт.