Zigbee Dimmer 2-CH Module User Manual

1. Вовед

This user manual provides detailed instructions for the installation, operation, and maintenance of the SAMOTECH Zigbee Dimmer 2-CH Module. This module is designed to integrate seamlessly with various Zigbee hubs, including Philips Hue, Home Assistant, Homekit, SmartThings, and Hubitat, allowing for smart control of lighting.

2. Информации за безбедност

ПРЕДУПРЕДУВАЊЕ: Electrical installation should only be performed by a qualified electrician. Incorrect installation can lead to electric shock, fire, or damage to the device and connected equipment. Always disconnect power at the circuit breaker before performing any electrical work.

• Ensure the power supply is completely off before installation or maintenance.
• Потврдете томtage and current ratings of the module are compatible with your electrical system and connected loads.
• Овој уред бара неутрална жица за правилно функционирање.
• Не го изложувајте уредот на влага или екстремни температури.
• Придржувајте се до сите локални електрични кодови и прописи.

3. Производот завршиview

The SAMOTECH Zigbee Dimmer 2-CH Module is a compact in-wall device designed for smart lighting control. It supports resistive, capacitive, and inductive loads and features a soft start function. It can be installed in deep wall switch electrical boxes or behind ceiling roses.

Клучни карактеристики:

• ZigBee 3.0 protocol for reliable wireless communication.
• Compatible with popular Zigbee gateways (Philips Hue, Homekit, Echo Plus, Hubitat, Homeassistant).
• Wide input and output voltagопсег: 100-240 VAC.
• Supports various load types.
• Requires a neutral wire.
• Soft start function for extended bulb life.
• Supports self-forming Zigbee networks and find-and-bind mode.

Дијаграм на модулот:

Слика 3.1: SAMOTECH Zigbee Dimmer 2-CH Module. The image shows the compact white module with green screw terminals for input (AC 100-240V L, L, N, N) and output (OUT), a small antenna, a reset button, and labels including "zigbee certified product", "SM308-S", "SAMOTECH", "Ratings: 100-240V~, 50/60Hz MAX:4.8A / 1.4A", and "CE UK CA" markings.

4. Поставување и инсталација

Важно: Ensure power is disconnected at the circuit breaker before proceeding with installation.

1. Жици: Connect the module according to the provided wiring diagram (refer to product packaging or manufacturer's website for detailed diagrams). Ensure correct connection of Live (L), Neutral (N), and Output (OUT) wires. The module requires a neutral wire.
2. Поставување: For initial setup, place the device as close as possible to your Zigbee hub to ensure a strong signal for pairing.
3. Иницирај режим на спарување:
   • For SM308/SM309 models: Press the reset button 5 times rapidly.
   • For SM314 models: Press the reset button twice. A blue LED flashing indicates the device is ready for pairing.
   • For MS104Z models: Turn the device on 5 times. A beep sound indicates the device is ready for pairing.
4. Pairing with Zigbee Hub:
   • Amazon Echo Plus/Echo Show 2nd Gen: Ask Alexa to "discover new devices."
   • Philips Hue: Add a new light through the Hue app: Settings -> Light setup -> Add light (SM308, SM309, SM314 only). Note: Pairing with Philips Hue may require a "Touch Link" procedure, where the module is brought very close to the Hue Bridge during pairing.
   • Other Compatible Zigbee Hubs (Home Assistant, Homekit, SmartThings, Hubitat): Follow your specific hub's instructions for adding new Zigbee devices.
5. Тестирање: Once paired, test the dimmer functionality through your Zigbee hub's application or voice commands.

5. Упатства за работа

Once the SAMOTECH Zigbee Dimmer Module is successfully installed and paired with your Zigbee hub, you can control your connected lights using the hub's interface, associated smart switches, or voice commands (if integrated with a voice assistant).

• Контрола за вклучување/исклучување: Use your Zigbee app or voice assistant to turn the connected lights on or off.
• Контрола на затемнување: Adjust the brightness level of the connected lights through your Zigbee app's dimmer slider or specific voice commands (e.g., "Set brightness to 50%").
• Scene and Automation: Integrate the dimmer module into scenes, routines, or automations within your Zigbee ecosystem for advanced control based on schedules, sensor triggers, or other smart home events.
• Physical Switch Control: If a retractive (momentary) light switch is connected to the module's input (S1/COM), you can use it to toggle the lights on/off and, in some configurations, dim them by holding the switch.

6. Одржување

The SAMOTECH Zigbee Dimmer Module requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Чистење: Доколку е потребно, нежно избришете го модулот со сува, мека крпа. Не користете течни средства за чистење или растворувачи.
• Ажурирања на фирмверот: Periodically check your Zigbee hub's application for available firmware updates for the module. Updates can improve performance, add features, or fix bugs.
• Еколошки услови: Ensure the module is installed in a dry environment, away from direct sunlight, excessive heat, or moisture.
• Циклус на напојување: If the module becomes unresponsive, try power cycling it by turning off the circuit breaker for a few seconds and then turning it back on.

7 Смена на проблеми

8. Спецификации

9. Гаранција и поддршка

For warranty information and technical support, please refer to the official SAMOTECH webстраницата или директно контактирајте ја нивната служба за корисници. Чувајте ја сметката за купување како доказ за купување за гаранциски побарувања.

Контакт информации: Ве молиме посетете www.samotech.co.uk for the latest support resources and contact details.