Вовед
The JHS Pedals COLOUR BOX 10 is a studio-quality preamp, EQ, and distortion unit designed for compatibility with various instruments. This manual provides detailed instructions for its setup, operation, and maintenance.
Содржина на пакетот
Пред да продолжите со поставувањето, проверете дали сите елементи се присутни:
- COLOUR BOX 10 Pedal
- Прекинувач за избор на влез
- Кабел за напојување
Клучни карактеристики
- Incorporates an Output Transformer for enhanced signal integrity.
- Safely Handles 48V Phantom Power, suitable for condenser microphones.
- Precision EQ Control with dedicated EQ Shift Knobs for detailed tone shaping.
- Ultra Clean Headroom with Hi/Lo Switch for versatile gain stagинг.
- Consistent Clean Signal on Acoustic Guitar, preserving natural tone.
- Silent Operation, No Switch-Pop, ensuring smooth performance transitions.
- Powered by Standard 9V DC Negative Power for easy integration into existing setups.
Контроли и врски
The COLOUR BOX 10 features a comprehensive set of controls for precise sound sculpting. Refer to the image below for a visual guide to the pedal's layout.

Слика 1: Врв view of the JHS Pedals COLOUR BOX 10, showing all control knobs and switches.
Контролни копчиња:
- Мајстор: Ја контролира вкупната излезна јачина на звукот на педалата.
- Pre-Vol: Adjusts the input gain, influencing the amount of saturation and distortion.
- Чекор: A stepped gain control that adds distinct stages of gain and color to the signal.
- Hi Pass: Controls the cutoff frequency for the high-pass filter. Turning clockwise increases the cutoff frequency, removing more low-end.
- Требен: Adjusts the high-frequency equalization.
- Средно: Adjusts the mid-frequency equalization.
- Бас: Adjusts the low-frequency equalization.
- Поместување на високи тонови: Shifts the center frequency of the Treble EQ band.
- Mid Shift: Shifts the center frequency of the Middle EQ band.
- Bass Shift: Shifts the center frequency of the Bass EQ band.
Прекинувачи:
- Hi Pass Toggle Switch: Activates or deactivates the Hi Pass filter.
- Hi/Lo Toggle Switch: Selects between high and low headroom modes, affecting the overall gain structure and clean signal.
Врски:
- Input (1/4" TRS): Connect your instrument or microphone.
- Output (XLR): Connect to an audio interface, mixer, or ampживописен.
- Влез на струја од 9V DC: Connect a standard 9V DC negative center power supply.
Водич за поставување
- Поврзување за напојување: Connect the provided 9V DC power cable to the pedal's power input. Ensure you use a standard 9V DC negative center power supply.
- Instrument/Microphone Input: Connect your instrument (e.g., guitar, bass) or microphone to the 1/4" TRS input jack. If using a microphone requiring phantom power, the COLOUR BOX 10 can safely handle 48V phantom power.
- Излезна врска: Connect the XLR output of the COLOUR BOX 10 to your audio interface, mixing console, or ampживописен.
- Почетни поставки: Before powering on, set all control knobs to their middle position (12 o'clock) and ensure both toggle switches are in their neutral or 'off' position (if applicable, for Hi Pass).
- Вклучување: Apply power to the pedal. The indicator LED should illuminate.
Упатства за работа
The COLOUR BOX 10 offers extensive tonal possibilities. Experiment with the controls to find your desired sound.
Добијте СtagИНГ:
- Користете го Pre-Vol knob to adjust the initial gain. Higher settings will introduce more saturation and distortion.
- На Чекор knob provides incremental gain stages, adding character and drive.
- На Здраво/Ло toggle switch selects between two headroom settings. 'Hi' offers more clean headroom, while 'Lo' provides earlier breakup and compression.
Изедначување:
- Прилагодете го Високи високи тонови, Среден, и Бас knobs to shape your tone.
- Искористете го Treble Shift, Mid Shift, и Bass Shift knobs to fine-tune the frequency centers of each EQ band, allowing for precise tonal adjustments.
- На Здраво пропусница filter, activated by its toggle switch, can be used to remove unwanted low-end rumble or to tighten up your sound. Adjust the Здраво пропусница knob to set the cutoff frequency.
Излез Ниво:
На Мајстор knob controls the final output volume. Adjust this to match the input level of your next device in the signal chain.
Одржување
- Чистење: Користете мека, сува крпа за чистење на надворешноста на педалата. Избегнувајте абразивни средства за чистење или растворувачи.
- Складирање: Чувајте ја педалата на суво место, подалеку од екстремни температури и влажност.
- Напојување: Always use the correct 9V DC negative center power supply to prevent damage.
Решавање проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Нема излез на звук. | Неправилно напојување, лабави кабли, заобиколена педала. | Verify power connection and supply specifications. Check all input/output cables. Ensure the pedal is engaged. |
| Прекумерна бучава или зуење. | Ground loop, faulty cables, proximity to interference sources. | Use isolated power supply. Try different cables. Move pedal away from power transformers or digital devices. |
| Distortion is too high/low. | Pre-Vol or Step knob settings, Hi/Lo switch position. | Adjust Pre-Vol and Step knobs. Experiment with the Hi/Lo switch to find desired gain structure. |
Спецификации
| Карактеристика | Детал |
|---|---|
| Тежина на ставката | 1.57 фунти |
| Димензии на производот | 6.75 x 4.35 x 3.4 инчи |
| Извор на енергија | DC моќност |
| Voltage | 9 волти |
| Тип на конектор | XLR, 1/4" TRS |
| Тип на материјал | Метал, печатена плочка |
| Прво достапен датум | 7 октомври 2024 година |
Гаранција и поддршка
For warranty information and technical support, please refer to the official JHS Pedals webлокација или директно контактирајте ја нивната служба за корисници. Зачувајте ја сметката за купување за гаранциски барања.
JHS Pedals Official Webсајт: www.jhspedals.com