AstroAI L8 Portable Electric Bike Pump

1. Информации за безбедност

Please read all safety instructions carefully before using the AstroAI L8 Portable Electric Bike Pump. Failure to follow these instructions may result in injury or damage to the device.

• Чувајте го уредот подалеку од деца.
• Do not expose the pump to extreme temperatures or direct sunlight for prolonged periods.
• Avoid using the pump in wet conditions or near flammable liquids/gases.
• Ensure the correct pressure is set for the item being inflated to prevent over-inflation, which can cause bursting and injury.
• Do not operate the pump continuously for more than 12 minutes. Allow it to cool down for at least 15 minutes after continuous use.
• This pump is not suitable for inflating car tires, Segways, or electric scooters.

2. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• 1 x AstroAI Electric Bike Pump
• 1 x Schrader Hose
• 1 x Presta адаптер за вентил
• 1 x Dunlop Valve Adapter
• 1 x топчеста игла
• 1 x Кабел за полнење од тип C
• 1 x торба за складирање
• 1 x Упатство за употреба

3. Производот завршиview

The AstroAI L8 Portable Electric Bike Pump is a compact and versatile tire inflator designed for various bicycles, e-bikes, motorcycles, and sports balls. It features a digital display, preset modes, and an auto-shutoff function for precise inflation.

Figure 3.1: AstroAI L8 Portable Bike Pump with included valve adapters.

The pump is equipped with a high-voltage motor for efficient inflation, capable of inflating a 700 x 35C city bike tire from 60 PSI to 80 PSI in approximately 35 seconds. Its lightweight and ergonomic design make it easy to carry and store.

Figure 3.2: Compact and portable design of the AstroAI L8 pump.

Приказ и контроли

Figure 3.3: Dual-value LED display and control buttons.

The LED display shows both real-time and preset pressure values. Control buttons allow for mode selection, unit switching (PSI/BAR), and pressure adjustment.

4. Полнење на уредот

The AstroAI L8 pump is equipped with a built-in lithium battery and supports Type-C charging. Before first use, fully charge the device.

1. Connect the provided Type-C charging cable to the pump's charging port.
2. Поврзете го другиот крај од кабелот со соодветен USB адаптер за напојување (не е вклучен).
3. The battery indicator on the display will show charging status. Once fully charged, the indicator will show a full battery.

A single full charge can inflate up to 25 city bike tires (60–80 PSI).

5. Setup and Valve Adapters

The pump comes with a Schrader valve hose and adapters for Presta and Dunlop valves.

Attaching the Schrader Hose

1. Screw the Schrader hose securely onto the pump's air outlet.
2. For Schrader valves, directly connect the hose to the tire valve.

Using Presta and Dunlop Valve Adapters

For Presta or Dunlop valves, first install the appropriate adapter onto the tire valve, then connect the Schrader hose to the adapter.

• Преста вентил: Unscrew the Presta valve cap, then screw on the Presta valve adapter.
• Dunlop Valve: Screw on the Dunlop valve adapter.

Figure 5.1: Included valve adapters for versatile use.

6. Операција

Вклучување/исклучување

• To turn on: Press and hold the Power Button for 3 seconds.
• To turn off: Press and hold the Power Button for 3 seconds, or the device will automatically shut off after a period of inactivity.

Избор на режим

The pump offers 5 preset modes and a custom mode. Press the 'M' button to cycle through the modes:

• Градски велосипед
• Планински велосипед
• Патен велосипед
• Дебелиот велосипед
• Custom Mode (for motorcycles, balls, etc.)

Figure 6.1: Available preset and custom inflation modes.

Setting Pressure and Inflation

1. After selecting a mode, use the '+' and '-' buttons to adjust the desired pressure.
2. Press the unit button to switch between PSI and BAR units.
3. Connect the hose to the tire valve (with adapter if necessary).
4. Press the Power Button to start inflation. The pump will display real-time pressure.
5. Пумпата автоматски ќе застане штом ќе се достигне претходно поставениот притисок.

Figure 6.2: Setting preset pressure and automatic shutoff feature.

The memory function saves your last pressure setting for convenience.

7. LED светилка

The AstroAI L8 pump includes a built-in LED light with three modes for enhanced visibility and safety:

• Постојана светлина: За општо осветлување.
• Бавен блиц: For signaling or increased visibility.
• Брз трепкање (SOS): За итни ситуации.

To activate or change modes, press the flashlight button.

Figure 7.1: LED flashlight with three modes.

8. Одржување

• Clean the pump exterior with a soft, damp крпа. Не користете груби хемикалии или абразивни средства за чистење.
• Чувајте ја пумпата на ладно и суво место кога не е во употреба.
• Осигурајте се дека приклучокот за полнење е без прашина и остатоци.
• Regularly check the hose and adapters for any signs of wear or damage. Replace if necessary.

9 Смена на проблеми

10. Спецификации

11. Гаранција и поддршка

The AstroAI L8 Portable Electric Bike Pump comes with a 2-годишна гаранција на производителот.

For technical support, warranty claims, or any questions regarding your product, please contact AstroAI customer service through their official webстраницата или информациите за контакт наведени во вашата документација за купување.

12. Видео за производот