GOCHIFIX Auto Hat Heat Press Machine

1. Вовед и повеќеview

The GOCHIFIX Auto Hat Heat Press Machine is designed for efficient and precise heat transfer applications on various headwear and small items. Featuring automatic operation, precise temperature and timer control with four memory modes, and a curved heat plate, this machine simplifies the heat transfer process for professional and hobbyist use.

Its compact and versatile design makes it suitable for home use, small businesses, or portable crafting at events. The machine is equipped with enhanced safety features and interchangeable hat pads to accommodate different hat styles and sizes.

Figure 1: GOCHIFIX Auto Hat Heat Press Machine

2. Инструкции за безбедност

Ве молиме прочитајте ги и разберете ги сите безбедносни упатства пред да ракувате со машината за да спречите повреда или оштетување.

• Електрична безбедност: Ensure the machine is plugged into a grounded outlet with the correct voltage (110 волти). Не ракувајте со влажни раце или во дamp услови.
• Топли површини: The heat plate reaches high temperatures (up to 400°F/200°C). Always wear the provided high-temperature gloves when handling hot parts or materials. Avoid direct contact with the heating elements.
• Итен прекин: Press the 'Stop' button on the control panel to immediately interrupt operation in case of an emergency.
• Заштита од прегревање: The machine includes a built-in fuse that will automatically activate if overheating occurs. Two spare fuses are included for replacement.
• Стабилност: Place the machine on a stable, flat, and heat-resistant surface. Anti-slip pads are provided to prevent shaking during operation.
• Вентилација: Обезбедете соодветна вентилација околу машината за време на употреба.
• Деца и домашни миленици: Држете ги децата и домашните миленици подалеку од машината што работи.

3. Компоненти на производот

Your GOCHIFIX Auto Hat Heat Press Machine package includes the following items:

• Auto Hat Heat Press Machine (Main Unit)
• Curved Heat Plate (6.54"x3.84")
• Interchangeable Hat Pads:
  • Large Pad: 5.59" × 3.78" (for adult hats)
  • Small Pad: 4.94" × 2.95" (for children's hats)
• Power Cord (Wire length: 59.06")
• 1 Pair Silicone Heat-Resistant Gloves
• 2 Spare Fuses
• Упатство за употреба

Figure 2: Main components and accessories of the heat press machine.

4. Поставување

1. Отпакувајте ја машината: Внимателно отстранете ги сите компоненти од пакувањето. Зачувајте ја амбалажата за идно складирање или транспорт.
2. Поставете на стабилна површина: Position the heat press machine on a flat, sturdy, and heat-resistant workbench or table. Ensure there is adequate space around the machine for safe operation.
3. Поврзете напојување: Insert the power cord into the machine's power interface and then plug it into a standard 110V grounded electrical outlet.
4. Attach Hat Pad: The machine comes with two interchangeable hat pads. Select the appropriate size (adult or child) and securely attach it to the lower platen. To change pads, simply rotate the nuts on both sides to release and secure the desired pad.

5. Упатства за работа

За успешен пренос на топлина, следете ги овие чекори:

1. Вклучување: Flip the red power switch located on the side of the machine to the 'ON' position. The digital display will illuminate.
2. Поставете температура и време:
   • Press the 'SET' button to enter temperature/time setting mode.
   • Use the '+' and '-' buttons to adjust the desired temperature (46-400°F / 8-200°C) and time (0-999 seconds).
   • Притиснете повторно „SET“ за да потврдите секое поставување.
   • To switch between Celsius and Fahrenheit, press and hold the '+' button to enter the password screen, adjust the display value to 88, and click 'SET' to toggle.
3. Utilize Memory Modes: The machine features 4 memory modes to save frequently used temperature and time settings. Press the 'MODE' button to cycle through and select a saved mode for quick setup.
4. Претходно загревање: Allow the machine to reach the set temperature. The display will show the current temperature rising.
5. Подгответе шапка: Place the hat onto the lower hat pad. Use the adjustable hat stretcher to ensure the cap is smooth and wrinkle-free, creating a flat pressing surface.
6. Position Transfer Material: Carefully place your sublimation, vinyl, or heat transfer material onto the hat in the desired position. Use heat-resistant tape to secure it if necessary.
7. Започнете со притискање: Once the machine reaches the set temperature, press the 'ENTER' button. The curved heat plate will automatically lower and apply pressure. A countdown timer will begin.
8. Автоматско ослободување: When the countdown finishes, a buzzer will sound, and the heat plate will automatically rise and release, freeing your hands.
9. Remove Product: Carefully remove the hat using the provided heat-resistant gloves. Allow the transfer to cool before peeling off any backing material (if applicable).

Figure 3: Visual guide for easy operation.

Официјални видеа за производи:

6. Одржување

• Чистење: After each use, ensure the heat plate has cooled down. Wipe the curved heat plate with a soft, damp крпа за отстранување на евентуални остатоци. Не користете абразивни средства за чистење.
• Замена на осигурувачи: If the machine unexpectedly shuts off due to overheating, the fuse may need replacement. Unplug the machine, locate the fuse holder, and replace the blown fuse with one of the provided spare fuses.
• Складирање: Чувајте ја машината во сува средина без прашина кога не ја користите.

7 Смена на проблеми

• Машината не се вклучува: Check if the power cord is securely plugged into both the machine and the wall outlet. Ensure the power switch is in the 'ON' position. Verify the electrical outlet is functional.
• Heat Plate Not Heating: Confirm that the temperature is set correctly on the digital panel. Allow sufficient time for the machine to reach the set temperature. If the issue persists, check the fuse.
• Uneven Transfers or Wrinkles: Ensure the hat is stretched smoothly and securely on the lower platen using the hat stretcher. Verify that the transfer material is properly positioned and secured with heat-resistant tape. Adjust pressure if necessary.
• Buzzer Not Sounding: Check the timer settings to ensure it is not set to 0.

8. Спецификации

9. Гаранција и поддршка

For warranty information, technical support, or service inquiries, please refer to the warranty card included in your product packaging or contact GOCHIFIX customer service directly. Keep your purchase receipt as proof of purchase.