1. Производот завршиview
The JONSBO N10 is a compact Mini ITX PC case designed for small form factor (SFF) builds. It features an aluminum alloy shell with a sandblasted finish and North American walnut trim, offering both durability and aesthetic appeal. The case supports Mini ITX motherboards and 1U FLEX power supplies up to 150mm in length. Its design allows for flexible placement in both standing and lying positions.
Image 1.1: The JONSBO N10 Mini ITX PC Case in a typical desktop setup, showcasing неговата компактна големина и дизајн.
Image 1.2: The JONSBO N10 case positioned on a desk, highlighting its small footprint and integration into a workspace.
Видео 1.1: Официјален производ завршенview of the JONSBO N10/NV10 Mini ITX PC Case, demonstrating its features and design.
Клучни карактеристики:
- Компактен дизајн: Portable capacity of approximately 4.5L, suitable for small spaces.
- Премиум материјали: Constructed from aluminum alloy with a sandblasted finish and North American walnut trim.
- Флексибилно поставување: Can be used in both standing and lying orientations.
- Ефикасно ладење: Features a multi-component perforated design for enhanced heat dissipation and improved airflow. Includes two 5000 RPM 40mm high-speed fans for auxiliary hard drive cooling.
- Поддршка за складирање: Accommodates up to four 2.5-inch SSDs.
- Компатибилност со напојување: Supports 1U FLEX power supplies with a maximum length of 150mm.
- Лесно одржување: The upper cover is equipped with an easy-to-pull handle for convenient disassembly and maintenance.
- Преден влез/излез: Includes a USB 3.2 Gen 2 Type-C port.
- Поддршка за радијатор: Compatible with air coolers up to 38mm in height.
2. Поставување и инсталација
This section provides general guidelines for installing components into your JONSBO N10 PC case. Always refer to the specific manuals for your motherboard, power supply, and other components for detailed instructions.
2.1 Расклопување на куќиштето
To begin installation, the case needs to be opened. The JONSBO N10 features a quick-release design for the top plate, allowing for easy access to the internal components.
- Locate the easy-to-pull handle on the upper cover.
- Gently pull the handle to release the top cover.
- Remove the top cover to access the interior of the chassis.
Image 2.1: The JONSBO N10 case with its top panel lifted, demonstrating the tool-free access for installation and maintenance.
2.2 Инсталација на матична плоча
The JONSBO N10 is compatible with Mini ITX motherboards. Install your motherboard into the designated area within the chassis, securing it with the appropriate screws.
Слика 2.2: Внатрешна view of the JONSBO N10 case showing a Mini ITX motherboard and CPU cooler installed.
2.3 Инсталација на напојување
The case supports 1U FLEX power supplies with a maximum length of 150mm. The power supply is typically installed from the bottom of the chassis.
- Orient the 1U FLEX power supply correctly.
- Slide the power supply into its designated slot from the bottom of the case.
- Secure the power supply using the provided screws.
Image 2.3: Diagram illustrating the installation process of a 1U FLEX power supply into the JONSBO N10 case from the bottom.
2.4 Инсталација на уред за складирање
The JONSBO N10 provides support for up to four 2.5-inch SSDs. A dedicated bracket is used for mounting these drives.
- Attach the 2.5-inch SSDs to the provided storage bracket.
- Slide the filled bracket into its designated position within the chassis.
- Осигурајте се дека држачот е безбедно прицврстен.
Image 2.4: Diagram demonstrating the installation of 2.5-inch SSDs into the JONSBO N10 case using a dedicated bracket.
2.5 Инсталација на вентилатор
The N10 case includes two 40mm high-speed fans for auxiliary hard drive cooling, located at the rear window. Ensure these fans are properly connected to your motherboard's fan headers.
Слика 2.5: Задна страна view of the JONSBO N10 case, highlighting the placement of the two 40mm fans for hard drive cooling.
3. Упатства за работа
Once all components are installed and the case is reassembled, you can begin operating your PC.
- Connect all necessary external peripherals (monitor, keyboard, mouse, etc.) to the motherboard's I/O ports.
- Connect the power cable to the power supply unit and then to a wall outlet.
- Press the power button located on the front panel of the case to turn on your PC.
- Utilize the front USB 3.2 Gen 2 Type-C port for connecting compatible devices.
Слика 3.1: напред view of the JONSBO N10 case, showing the walnut trim and the front I/O port.
4. Одржување
Редовното одржување помага да се обезбедат оптимални перформанси и долготрајност на компонентите на вашиот компјутер.
4.1 Чистење
- Надворешност: Wipe the aluminum alloy and walnut surfaces with a soft, dry cloth. Avoid abrasive cleaners.
- Внатрешност: Periodically open the case (refer to Section 2.1) and use compressed air to remove dust buildup from fans, heatsinks, and other components. Ensure the PC is powered off and unplugged before cleaning the interior.
- Дупки за вентилација: The perforated design allows for good airflow. Keep these holes clear of obstructions and dust.
Слика 4.1: Различни views of the JONSBO N10 case highlighting the perforated panels designed for optimal heat dissipation and airflow.
4.2 Fan Check
Ensure the two 40mm fans are free from dust and spinning correctly to maintain adequate cooling for your hard drives.
5 Смена на проблеми
Овој дел се однесува на вообичаени проблеми со кои може да се соочите со куќиштето на вашиот компјутер.
5.1 Компјутерот не се вклучува
- Кабел за напојување: Проверете дали кабелот за напојување е безбедно поврзан и со напојувањето и со ѕидниот штекер.
- Прекинувач за напојување: Verify that the power switch on the power supply unit is in the "ON" position.
- Конектори на предниот панел: Check that the power button and other front panel connectors are correctly attached to the motherboard.
- Внатрешни врски: Confirm all internal power cables (24-pin ATX, CPU power, etc.) are firmly seated.
5.2 Проблеми со прегревање
- Проток на воздух: Ensure the case's ventilation holes are not obstructed.
- Фанови: Verify that all case fans and CPU cooler fans are spinning correctly. Clean any dust buildup.
- Компатибилност на компоненти: Ensure your CPU cooler height is within the 38mm limit to allow for proper airflow.
6. Спецификации
| Карактеристика | Спецификација |
|---|---|
| Големина на производот | 205мм(Ш) x 205мм(Д) x 108мм(В) |
| Материјал | 3.3mm Aluminum Alloy + 1.0mm Steel Plate |
| Hard Drive Bay | 4 x 2.5" SSD дискови |
| Компатибилност со матична плоча | Мини ITX |
| Преден влез/излезен приклучок | USB 3.2 Gen 2 Type-C x 1 |
| Поддршка на PSU | 1U FLEX power supply (max length 150mm) |
| Radiator Support (Air Cooler) | ≤ 38mm height |
| Фановите | 2 x 40mm (5000 rpm ± 10%) (standard) |
| Chassis Weight (N.W.) | 1.6 KGS |
Image 6.1: Diagram illustrating the dimensions of the JONSBO N10 Mini ITX PC Case.
Image 6.2: Detailed product information table for the JONSBO N10 case, including dimensions, materials, and component support.
7. Гаранција и поддршка
For warranty information, technical support, or service inquiries, please contact JONSBO customer service or visit the official JONSBO webлокација. Чувајте ја сметката како доказ за купување за гаранциски побарувања.
JONSBO Official Webсајт: www.jonsbo.com
