Radiomaster Pocket Hall Gimbal Transmitter User Manual

1. Вовед

The Radiomaster Pocket is a compact and lightweight radio transmitter designed for various remote-controlled applications. It is available in ExpressLRS and MPM CC2500 versions, both preinstalled with EdgeTX firmware. This manual provides essential information for setting up, operating, and maintaining your Radiomaster Pocket transmitter.

Figure 1: Radiomaster Pocket Hall Gimbal Transmitter (ELRS-Transparent)

2. Информации за безбедност

Please refer to the instruction manual before use. Always operate the transmitter responsibly and ensure all connections are secure before use. Improper use may result in damage to the device or connected equipment.

3. Производот завршиview

The Radiomaster Pocket transmitter features a robust design with several key components for precise control and user convenience.

Слика 2: Предна и Задна страна View Дијаграм на компоненти

Клучни карактеристики:

• Хол Гимбали: Provides smooth centering and precise response for control inputs.
• Отстранливи стапчиња: Allows for easy transport and storage by detaching the stick ends.
• Преклопна антена: The antenna can be folded for compact storage, preventing damage during transport.
• LCD екран со позадинско осветлување: Offers a clear display of settings and telemetry data, balancing size and functionality.
• Компатибилност со батерии 18650: Designed to operate with 18650 batteries for extended usage (batteries not included).
• Вградени LED светла: Visualizes control inputs and operational status.
• Простор за надворешни модули: Compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer for expanded functionality.

Слика 3: Напред и назад Views на предавателот

Слика 4: Страна View of the Transmitter

Figure 5: Removable Stick Ends and Foldable Antenna

Figure 6: Built-in LED Lights and External Module Bay

4. Поставување

4.1. Инсталација на батерија

The Radiomaster Pocket uses 18650 batteries (not included). Open the battery compartments on the rear of the transmitter and insert the batteries according to the polarity indicators. Close the compartments securely.

4.2. Antenna Deployment

Unfold the antenna from its stored position to the upright position before operation to ensure optimal signal transmission and reception.

4.3. Stick End Installation/Removal

The stick ends are removable for convenience. To install, screw them onto the gimbals. To remove, unscrew and store them in the designated compartments on the side of the transmitter.

Figure 7: Stick End Details and Storage

4.4. Првично вклучување

Press and hold the power button until the LCD screen illuminates and the EdgeTX firmware starts. Follow any on-screen prompts for initial setup or calibration.

4.5. Connecting to a Computer (Joystick Mode)

Connect the transmitter to your computer using a USB-C cable. The transmitter can function as a joystick for flight simulators, allowing you to practice flying before real flights. Ensure the transmitter is in the correct USB mode (e.g., Joystick) as per the EdgeTX settings.

5. Упатства за работа

5.1. Основни контроли

• Гимбали: Control the primary movements of your aircraft (throttle, roll, pitch, yaw).
• Switches (SA, SB, SC, SD, SE): Configurable switches for various functions such as flight modes, arming, or special actions.
• Buttons (SYS, RTN, PAGE>, PAGE<, TELE): Used for navigating the EdgeTX menu system and accessing specific functions.
• Тркало од менито: For scrolling through menu options and adjusting values on the LCD screen.
• Копчиња за скратување: Used for fine-tuning channel outputs for stable flight.

5.2. LCD Screen Navigation

The backlit LCD screen displays real-time information and allows access to the EdgeTX operating system. Use the menu wheel and navigation buttons (SYS, RTN, PAGE>, PAGE<, TELE) to browse and adjust settings.

5.3. Gimbal Adjustment

The gimbals can be adjusted for tension and self-centering. Refer to the diagram below for specific adjustment points:

Figure 8: Gimbal Adjustment Points

• А (IR): Свртете надесно за да го оневозможите самоцентрирањето (гас), а спротивно од стрелките на часовникот за да го овозможите самоцентрирањето.
• B (T): Turn clockwise to increase stick tension, counter-clockwise to decrease stick tension.
• C (UP-DOWN): Turn clockwise to increase vertical stick tension, counter-clockwise to decrease stick tension.
• D (LEFT-RIGHT): Turn clockwise to increase horizontal stick tension, counter-clockwise to decrease stick tension.

5.4. Простор за надворешни модули

The external module bay supports Nano-size modules, such as RadioMaster Nano-size modules, TBS Nano Crossfire, and TBS Nano Tracer. Ensure the module is correctly inserted and configured within the EdgeTX system.

5.5. DSC Trainer Port

The DSC Trainer Port allows connection to other transmitters for trainer/student mode or to simulators.

5.6. Слот за SD-картичка

The SD card slot is used for storing models, sounds, and firmware updates for the EdgeTX operating system.

6. Одржување

6.1. Чистење

Wipe the transmitter with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the casing или екран.

6.2. Нега на батерии

Always use appropriate 18650 batteries and charge them using the provided USB-C cable or a compatible charger. Do not overcharge or fully discharge batteries. Store the transmitter with batteries at a moderate charge level if not used for extended periods.

6.3. Ажурирања на фирмверот

Regularly check for and install firmware updates for the EdgeTX system to ensure optimal performance and access to new features. Instructions for updating firmware are typically available on the Radiomaster website or EdgeTX community forums.

7 Смена на проблеми

7.1. Transmitter Does Not Power On

• Ensure 18650 batteries are correctly installed and sufficiently charged.
• Verify the power button is pressed and held for the required duration.

7.2. "Switch Warning" on Startup

This warning indicates that one or more switches are not in their default or expected position during startup. Move all switches to their designated 'off' or 'up' positions, then press any button to clear the warning.

7.3. Connection Issues with Drone/Receiver

• Confirm the transmitter and receiver are properly bound.
• Проверете дали е точен моделот професионалецfile is selected on the transmitter.
• Ensure the external module (if used) is correctly installed and configured.

7.4. Computer Does Not Recognize Transmitter

• Проверете дали USB-C кабелот е функционален и правилно поврзан.
• Verify the transmitter is in the correct USB mode (e.g., Joystick, USB Storage) via the EdgeTX menu.
• Install any necessary drivers for your operating system, if prompted.

8. Спецификации

Слика 9: Димензии на предавателот

9. Што има во кутијата

The Radiomaster Pocket package includes the following items:

• 1 x Pocket Radio Transmitter
• 1 x Прилагодена торбичка за носење
• 1 x USB-C кабел
• 1 x Заштитник на екранот
• 1 x Налепница

Слика 10: Содржина на пакетот

10. Гаранција и поддршка

For warranty information, technical support, or further assistance, please refer to the official RADIOMASTER webстраницата или контактирајте ја нивната служба за корисници. Можете исто така да ја посетите Продавница RADIOMASTER на Amazon for product-related inquiries.