VIVO MOUNT-E-FD75C-S Electric Flip Down and Swivel Ceiling TV Mount User Manual

Вовед

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your VIVO MOUNT-E-FD75C-S Electric Flip Down and Swivel Ceiling TV Mount. Please read all instructions carefully before assembly and use. Retain this manual for future reference.

Информации за безбедност

ПРЕДУПРЕДУВАЊЕ:

• Do not install into drywall alone. The mount must be secured into wood studs, solid wood, concrete, or brick walls only.
• Ensure the ceiling structure can safely support the combined weight of the mount and your television.
• For TVs over 65 inches, ensure VESA holes are centered for adequate clearance from the ceiling.
• Always follow the provided drilling and hardware requirements for your specific installation surface.
• Keep children and pets away from the mount during operation.
• Не обидувајте се да го модифицирате држачот.

Содржина на пакетот

Verify that all components are present and undamaged. If any parts are missing or defective, contact VIVO customer support.

• Electric Flip Down and Swivel Ceiling TV Mount (Main Unit)
• RF далечински управувач
• Екстензии за монтирање
• Bracket Rails
• VESA Brackets
• Адаптер за напојување
• Кабелски клипови
• Hardware Kit (screws, washers, anchors, etc.)
• Шаблон за инсталација

Поставување и инсталација

Proper installation is crucial for the safety and functionality of your TV mount. Refer to the detailed video guide for visual assistance.

Step 1: Attach Mounting Extensions to Mount

Secure the mounting extensions to the main mount unit using the provided screws. Ensure they are firmly attached.

Image: Attaching Mounting Extensions
A person is shown attaching the mounting extensions to the main body of the VIVO MOUNT-E-FD75C-S electric ceiling TV mount using screws and an Allen wrench.

Step 2: Plug Power Adapter into Mount and Power Source

Connect the power adapter to the back of the mount and then plug it into a suitable power source. This is for initial setup and testing.

Image: Connecting Power
A hand plugs the power adapter into the back of the VIVO MOUNT-E-FD75C-S mount and then into a wall outlet.

Step 3: Unfold Mount using Remote and Unplug

Use the RF remote control to fully unfold the mount. Once unfolded, unplug the power adapter from the mount. This prepares the mount for ceiling installation.

Image: Unfolding the Mount
A hand uses the remote control to unfold the VIVO MOUNT-E-FD75C-S mount. The mount is shown in its fully extended position.

Чекор 4: Означете и дупчете дупки за монтирање

Position the provided template on the ceiling where you intend to install the mount. Mark the mounting holes. Drill pilot holes according to the manual's specifications. Insert screws into the mounting holes, ensuring they align with the keyhole slots of the mount extensions. НЕ ИНСТАЛИРАЈТЕ САМО ВО ЅИД.

Image: Marking and Drilling
A person uses a template to mark drilling locations on a ceiling and then drills pilot holes. A warning about not installing into drywall alone is visible.

Step 5: Fit Mount Assembly and Secure

Carefully fit the mount assembly through the keyhole slots on the ceiling. Turn the assembly until it is fully supported by the inserted screws. Secure the remaining screws to firmly attach the mount to the ceiling.

Image: Securing Mount to Ceiling
A person is shown fitting the VIVO MOUNT-E-FD75C-S mount onto the pre-installed screws in the ceiling and then tightening them.

Step 6: Attach Bracket Rails to Center Plate

Attach the bracket rails to the center plate of the VESA assembly. Loosen the top two screws and remove the bottom two screws as indicated in the manual.

Image: Assembling Bracket Rails
A person is assembling the bracket rails to the center plate of the VESA assembly, loosening and removing specific screws.

Step 7: Slide VESA Brackets onto Bracket Rails

Slide the VESA brackets onto the bracket rails. Attach the screws onto the bracket rails to secure them in place.

Image: Attaching VESA Brackets
The VESA brackets are being slid onto the bracket rails and secured with screws.

Чекор 8: Прикачете го VESA собранието на ТВ

Carefully attach the assembled VESA bracket system to the back of your television. Insert the set screws into the VESA bracket to secure the TV.

Image: Securing VESA to TV
The VESA bracket assembly is being attached to the back of a television, with screws being inserted to secure it.

Step 9: Place TV Assembly onto Mount

With assistance, carefully lift the TV assembly and place it onto the ceiling mount. Tighten the loosened top screws and reinsert the previously removed bottom screws to secure the TV to the mount.

Image: Mounting TV to Ceiling Mount
The television with the VESA assembly is being lifted and attached to the ceiling mount, with screws being tightened to secure it.

Чекор 10: Управување со кабли

Remove the adhesive backing from the cable clips and place them where desired on the mount to manage and conceal cables, ensuring they do not interfere with the mount's movement.

Image: Cable Management
A person is attaching cable clips to the VIVO MOUNT-E-FD75C-S mount to organize and secure the power and video cables.

Step 11: Plug Mount into Power Source

Plug the mount's power adapter into a power source to enable its motorized functions.

Image: Final Power Connection
The power adapter is plugged into the VIVO MOUNT-E-FD75C-S mount and then into a wall outlet, completing the power connection.

Упатства за работа

Your VIVO MOUNT-E-FD75C-S mount offers versatile control options:

• RF далечински управувач: Use the included RF remote for height adjustment and +90° to -90° swivel. It features 2 memory settings for convenience.
• Контрола на мобилни апликации: Download the Tuya mobile app from the App Store or Google Play. Connect the mount to the app for easy height adjustment and voice control (via Amazon Alexa or Google Home). The app offers 3 memory settings.

Image: Remote and App Control
This image displays the physical RF remote control and a smartphone screen showing the Tuya app interface, highlighting the dual control options for the VIVO electric TV mount. Links to download the app are provided below.

Download the Tuya Smart App: Google Play | App Store

The mount also features manual 0° to -80° tilt and +3° to -3° screen leveling for fine adjustments.

Одржување

• Редовно проверувајте ги сите завртки и врски за да бидете сигурни дека се цврсто затегнати.
• Clean the mount and TV with a soft, dry cloth. Avoid abrasive cleaners.
• Ensure cables are properly managed and do not snag during movement.

Решавање проблеми

Спецификации

Гаранција и поддршка

VIVO products are backed by a manufacturer's warranty. For specific warranty details, product support, or to report missing/defective parts, please refer to the documentation included with your purchase or visit the official VIVO website. VIVO offers U.S.-based support and generous product protection.