1. Вовед
The DIGITEN THT1032 is a versatile temperature and humidity controller designed for precise environmental management. It features three independent outlets for controlling heating/cooling, humidification/dehumidification, and timed operations. Equipped with dual high-precision probes, this device is suitable for various applications including reptile enclosures, mushroom cultivation, plant seeding, and home brewing.
2. Клучни карактеристики
- Работа „вклучи и пушти“: Simple setup with intuitive buttons for quick configuration.
- Dual High-Precision Probes: Separate probes for temperature (accuracy: ±0.4°C/±0.7°F) and humidity (accuracy: ±3%).
- Triple-Zone Precision Control: Three independent outlets for temperature, humidity, and timed devices.
- Голем LCD дисплеј: Clear, real-time monitoring with switchable Fahrenheit/Celsius units.
- Climate Customization: Combine heating/cooling with humidification/dehumidification, and program the third outlet for timers.
3. Содржина на пакетот
- DIGITEN THT1032 Controller Unit
- Температурна сонда
- Сонда за влажност
- Упатство за употреба
4. Производот завршиview
The DIGITEN THT1032 controller features a main unit with a large LCD display, control buttons, three power outlets, and two external probes for temperature and humidity sensing.
Слика 1: напред view of the DIGITEN THT1032 controller, showing the display, buttons, and three power outlets.
4.1. Контролен панел и дисплеј
The front panel includes an LCD screen and four control buttons: SET, MODE, Up (▲), and Down (▼).
Слика 2: Детално view of the controller's outlets and control buttons. OUT1 is for temperature, OUT2 for humidity, and OUT3 for timer functions.
- Копче SET: Used to select an outlet for configuration or confirm settings.
- Копче MODE: Used to change the operating mode (e.g., heating/cooling, humidification/dehumidification, timer program).
- Копче за нагоре (▲): Increases values or navigates menu options.
- Копче надолу (▼): Decreases values or navigates menu options.
- ОД 1: Temperature controlled outlet.
- ОД 2: Humidity controlled outlet.
- ОД 3: Timer controlled outlet.
4.2. Сонди
The controller comes with two separate probes: one for temperature and one for humidity. These probes are essential for accurate environmental monitoring.
Image 3: The temperature probe (left) and humidity probe (right) connected to the controller, illustrating their distinct functions.
5. Почетно поставување
- Поврзете ги сондите: Plug the temperature probe and humidity probe into their respective ports on the controller. Ensure they are securely connected.
- Поставување: Position the probes in the environment you wish to monitor and control. Ensure they are not directly exposed to heat sources, moisture, or airflow that could skew readings.
- Вклучување: Plug the controller into a standard 120V AC power outlet. The display will illuminate, showing current temperature, humidity, and time.
- Поврзете ги уредите: Plug your heating/cooling device into OUT1, your humidification/dehumidification device into OUT2, and any timed appliance (e.g., lights, misters) into OUT3.
6. Упатства за работа
6.1. Setting Temperature Control (OUT1)
- Притиснете го ПОСТАВЕТЕ button repeatedly until OUT1 is selected (indicated by a flashing OUT1 icon or similar).
- Користете го Горе (▲) or Долу (▼) buttons to adjust the desired target temperature.
- Притиснете РЕЖИМ to cycle through heating (HEAT) or cooling (COOL) modes. Select the appropriate mode for your connected device.
- Притиснете ПОСТАВЕТЕ to confirm the temperature and mode.
- To set the temperature differential (hysteresis), press and hold ПОСТАВЕТЕ for a few seconds when OUT1 is selected. Use Горе/Надолу to adjust the difference between the set point and when the device turns on/off. Press ПОСТАВЕТЕ да се потврди.
6.2. Setting Humidity Control (OUT2)
- Притиснете го ПОСТАВЕТЕ button repeatedly until OUT2 is selected.
- Користете го Горе (▲) or Долу (▼) buttons to adjust the desired target humidity percentage.
- Притиснете РЕЖИМ to cycle through humidification (HUMIDIFICATION) or dehumidification (DEHUMIDIFICATION) modes. Select the appropriate mode.
- Притиснете ПОСТАВЕТЕ to confirm the humidity and mode.
- To set the humidity differential, press and hold ПОСТАВЕТЕ for a few seconds when OUT2 is selected. Use Горе/Надолу за да прилагодите. Притиснете ПОСТАВЕТЕ да се потврди.
6.3. Setting Timer Control (OUT3)
- Притиснете го ПОСТАВЕТЕ button repeatedly until OUT3 is selected.
- Притиснете РЕЖИМ to enter the timer programming interface.
- Користете Горе (▲) or Долу (▼) to set the ON time (hour and minute). Press ПОСТАВЕТЕ за да преминете на следното поставување.
- Set the OFF time (hour and minute) using Горе/Надолу и ПОСТАВЕТЕ.
- The controller supports multiple ON/OFF programs for OUT3. Refer to the on-screen prompts for additional program slots.
- Притиснете ПОСТАВЕТЕ to save and exit the timer settings.
6.4. Префрлување на температурни единици (°C/°F)
To switch between Celsius and Fahrenheit, press and hold the Горе (▲) button for approximately 3 seconds. The display will change accordingly.
7. Одржување
- Чистење: Wipe the controller unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
- Грижа за сонда: Keep the probes clean and free from debris. Avoid bending or damaging the probe cables. If probes become dirty, gently clean them with a damp cloth and allow them to dry completely before re-use.
- Складирање: Кога не го користите, чувајте го контролерот на ладно и суво место, подалеку од директна сончева светлина и екстремни температури.
8 Смена на проблеми
| Прашање | Можна причина | Решение |
|---|---|---|
| Екранот е празен или не се вклучува. | Нема напојување; лабава врска. | Ensure the controller is securely plugged into a live power outlet. Check the power source. |
| OUT1/OUT2/OUT3 not activating connected device. | Incorrect settings; device malfunction; power issue. | Verify temperature/humidity/timer settings. Check if the connected device is working independently. Ensure the controller's set point is met for activation. |
| Humidity probe shows "ERR" reading. | Probe malfunction; damaged cable; sensor error. | Check the humidity probe connection. Inspect the probe cable for damage. If the error persists, the probe may need replacement. |
| Неточни мерења на температура/влажност. | Probe placement; dirty probe; probe malfunction. | Relocate probes away from direct heat/moisture/airflow. Clean probes gently. If issues persist, consider probe replacement. |
9. Технички спецификации
| Спецификација | Вредност |
|---|---|
| Број на модел | THT1032 |
| Потребна моќност | 100-240 VAC |
| Капацитет на носивост | 10A per outlet (1100W@110V, 2200W@220V) |
| Опсег на контрола на температурата | -10°C до 120°C / 14°F до 248°F |
| Точност на температурата | ± 0.4 ° C / ± 0.7 ° F |
| Прецизност на влажноста | ± 3% |
| Тип на сензор на сонда | Дигитален излез на сигнал, I2C интерфејс |
| Температура на работната средина | 0-50°C / 32-122°F |
| Operating Environment Relative Humidity | <85% |
| Тип на дисплеј | LCD екран |
| Материјал | Пластика |
| Боја | Греј |
| Тежина на ставката | 1.04 фунти |
| Димензии на пакетот | 6.85 x 6.34 x 1.93 инчи |
10. Гаранција и корисничка поддршка
DIGITEN provides a one-year warranty for any quality-related issues with this product. For technical assistance, troubleshooting, or warranty claims, please contact DIGITEN customer support through the retailer where the product was purchased or visit the official DIGITEN webсајт за информации за контакт.
Ве молиме зачувајте го доказот за купување за гарантен сервис.
