1. Вовед
Thank you for choosing the iHome Rechargeable Auto Sensing LED Light Bars. This manual provides essential information for the safe and efficient use of your new lighting solution. These versatile LED light bars are designed to provide convenient, motion-activated illumination for various indoor spaces such as cabinets, closets, hallways, and more. Featuring a rechargeable battery, dimmable brightness, and easy installation, these lights enhance visibility and energy efficiency in your home.
2. Информации за безбедност
Ве молиме прочитајте ги сите безбедносни упатства пред да го користите овој производ. Непочитувањето на овие упатства може да резултира со електричен удар, пожар или други опасности.
- Do not expose the light bars to water or excessive moisture. This product is designed for indoor use only.
- Do not attempt to disassemble, repair, or modify the light bars. Refer all servicing to qualified personnel.
- Држете подалеку од извори на топлина, директна сончева светлина и запаливи материјали.
- Ensure the installation surface is clean and dry before applying adhesive metal plates.
- Use only the provided USB charging cables for recharging.
- Do not stare directly into the LED light source, as it may cause eye strain.
3. Содржина на пакетот
Проверете дали сите артикли се присутни во вашиот пакет:
- 4 x iHome Rechargeable Auto Sensing LED Light Bars
- 4 x USB кабли за полнење
- 8 x Metal Plates with Adhesive (2 per light bar for secure mounting)
4. Карактеристики на производот
- Осветленост: 50 lumens, with three adjustable brightness modes (20%, 50%, 100%).
- Температура на боја: Offers Warm White, Natural White, and Cool White light options (approximately 3000K, 4500K, 6000K).
- Сензор за движење: Detects movement up to 19.6 feet (6 meters) within a 120° angle.
- Автоматски режим: Automatically turns on in dark conditions when motion is detected and turns off after 20 seconds of no motion.
- Секогаш вклучен режим: Обезбедува континуирано осветлување.
- Лесна инсталација: Built-in magnets for direct attachment to metallic surfaces, or use included adhesive metal plates for non-metallic surfaces.
- Батерија на полнење: High-capacity battery with USB-C charging for eco-friendly operation.
5. Поставување и инсталација
The iHome LED Light Bars offer flexible installation options.
5.1 Почетно полнење
Before first use, fully charge each light bar. Refer to Section 7 for charging instructions.
5.2 Опции за монтирање
Option 1: Magnetic Attachment (for metallic surfaces)
- Simply place the light bar directly onto any metallic surface. The built-in magnets will hold it in place.
Option 2: Adhesive Metal Plates (for non-metallic surfaces)
- Choose a clean, dry, and smooth surface for installation.
- Peel off the protective film from one side of the adhesive metal plate.
- Stick the metal plate firmly onto the desired surface. Apply pressure for 30 seconds to ensure strong adhesion.
- Attach the light bar to the metal plate. The light bar's magnets will securely connect to the plate.
- Repeat for additional light bars as needed.
Image: Illustration of installing the light bars using built-in magnets on a refrigerator and adhesive metal plates under a cabinet.
Слика: Прample of iHome LED Light Bars providing illumination inside kitchen cabinets.
6. Упатства за работа
Each light bar features a multi-function button to control its settings.
6.1 Избор на режим
Press the multi-function button to cycle through the following modes:
- ИСКЛУЧЕНО: Светлото е исклучено.
- AUTO режим: The light will only activate in dark conditions when motion is detected. It will turn off automatically after 20 seconds of no motion.
- ALWAYS-ON Mode: The light remains continuously on until manually turned off or the battery is depleted.
Image: Diagram illustrating the motion sensor range (9.84ft-16.40ft, 120 degrees) and 20-second auto shut-off feature.
6.2 Прилагодување на осветленоста
While the light is on (in either AUTO or ALWAYS-ON mode), press and hold the multi-function button to cycle through the three brightness levels: 20%, 50%, and 100%. Release the button when the desired brightness is reached.
6.3 Избор на температура на бојата
To change the light's color temperature, quickly double-press the multi-function button. The light will cycle between Warm White, Natural White, and Cool White. Select the color temperature that best suits your environment.
Image: Visual representation of the three available color temperature settings: Warm White, Natural White, and Cool White.
7. Полнење на уредот
Each iHome LED Light Bar is equipped with a rechargeable battery.
- When the battery is low, the light output may diminish, or the light may not turn on.
- Gently detach the light bar from its magnetic mounting location.
- Connect one end of the provided USB charging cable to the charging port on the light bar.
- Поврзете го другиот крај од USB кабелот со стандарден USB адаптер за напојување (не е вклучен) или со USB порт на компјутерот.
- The charging indicator light will illuminate (typically red) during charging.
- Once fully charged (approximately 1 hour for rapid recharge), the indicator light will change color (typically green or turn off).
- A full charge provides approximately 6 hours of continuous use in Always-On mode or up to 250 uses in Auto mode.
- After charging, disconnect the cable and reattach the light bar to its mounting location.
Image: Close-up of the light bar showing the USB-C charging port and cable connection, highlighting its rechargeable nature.
8. Одржување и грижа
To ensure the longevity and optimal performance of your iHome LED Light Bars, follow these care guidelines:
- Чистење: Wipe the light bars with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse in water.
- Нега на батеријата: For best battery life, avoid fully discharging the lights frequently. Recharge them when the light output noticeably dims. If storing for an extended period, charge the lights every 3-6 months.
- Складирање: Store the light bars in a cool, dry place away from direct sunlight and extreme temperatures.
- Adhesive Plates: If the adhesive on the metal plates loses its stickiness, replace them with new double-sided adhesive tape.
9 Смена на проблеми
If you encounter issues with your iHome LED Light Bars, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Светлото не се вклучува. | Батеријата е испразнета. Избран е неправилен режим. Insufficient darkness (in AUTO mode). | Charge the light bar fully. Ensure the light is in AUTO or ALWAYS-ON mode. Тестирајте во потемна средина. |
| Сензорот за движење не работи. | Light is not in AUTO mode. Сензорот е блокиран. Амбиенталната светлина е пресветла. | Префрлете се на АВТОМАТСКИ режим. Осигурете се дека сензорот е без пречки. Test in a darker area. |
| Светлината се гаси премногу брзо. | No continuous motion detected (in AUTO mode). | This is normal behavior for AUTO mode (20-second shut-off). If continuous light is needed, switch to ALWAYS-ON mode. |
| Индикаторското светло за полнење останува црвено. | Полнењето е во тек. Неисправен кабел или извор на енергија. | Allow sufficient time for charging (approx. 1 hour). If it remains red after extended charging, try a different USB cable or power adapter. |
| Излезот на светлина е слаб. | Слаба батерија. Поставката за осветленост е ниска. | Recharge the light bar. Adjust brightness to a higher level (refer to Section 6.2). |
10. Спецификации
| Карактеристика | Детал |
|---|---|
| Број на модел | 2IHLT10 |
| Бренд | iHome |
| Материјал | Алуминиум |
| Тип на извор на светлина | LED |
| Осветленост | 50 лумени (макс) |
| Температура на боја | Warm White, Natural White, Cool White (approx. 3000K, 4500K, 6000K) |
| Извор на енергија | Rechargeable Battery (4 x 12V batteries included) |
| Време на полнење | Approx. 1 hour (rapid recharge) |
| Battery Life (Always-On) | До 6 часа |
| Battery Life (Auto Mode) | До 250 употреби на полнење |
| Опсег на сензор за движење | До 19.6 стапки (6 метри) |
| Агол на сензорот за движење | 120° |
| Време на автоматско исклучување | 20 seconds (after no motion detected) |
| Тип на инсталација | Magnetic / Adhesive Metal Plate |
| Внатрешна/надворешна употреба | Само во затворен простор |
| Димензии на производот (пакет) | 9.5"Д x 16.8"Ш x 12.7"В |
| Тежина на предметот (пакет) | 1 фунта |
11. Гаранција и поддршка
iHome products are designed with quality and reliability in mind. This product is covered by a limited warranty against defects in materials and workmanship. For specific warranty details, please refer to the warranty card included with your purchase or visit the official iHome webсајт.
If you require technical support, have questions about your product, or need assistance with troubleshooting, please contact iHome customer service through their official website or the contact information provided in your product packaging. Please have your model number (2IHLT10) and proof of purchase ready when contacting support.
