Hobbywing QUICRUN WP 10BL120 SD G2 ESC & 3650 SD G2 Motor Combo Instruction Manual

1. Вовед

1.1 Производ надview

This manual provides essential instructions for the proper setup, operation, and maintenance of your Hobbywing QUICRUN WP 10BL120 SD G2 Sensored Electronic Speed Controller (ESC) and 3650 SD G2 Brushless Motor Combo. This high-performance system is designed for remote-controlled vehicles, offering reliable and efficient power delivery. Please read this manual thoroughly before use to ensure optimal performance and safety.

1.2 Содржина на пакетот

Upon opening your package, verify that all components are present:

• 1 x QUICRUN WP 10BL120 SD G2 ESC (Sensored)
• 1 x QUICRUN 3650 SD G2 Brushless Motor (with customizable Turn)
• Hobbywing Decals
• Various Accessories (e.g., wires, connectors, heat shrink tubing)

Image: The Hobbywing QUICRUN WP 10BL120 SD G2 ESC and 3650 SD G2 Motor Combo, showcasing the electronic speed controller and brushless motor components.

2. Безбедносни мерки на претпазливост

Придржувањето кон следните безбедносни упатства е клучно за спречување на оштетување на производот и обезбедување на безбедноста на корисникот:

• Прочитајте го прирачникот: Familiarize yourself with all instructions before operating the product.
• Правилни врски: Ensure all connections are correct and secure. Incorrect wiring can cause damage.
• Безбедност на батеријата: Use only compatible batteries. Observe correct polarity. Do not overcharge or short-circuit batteries.
• Управување со топлина: ESCs and motors can become hot during operation. Allow components to cool before handling.
• Изложеност на вода: While the ESC is waterproof (WP), avoid prolonged submersion or exposure to corrosive liquids. Ensure all ports are sealed if applicable.
• Вентилација: Ensure adequate airflow around the ESC and motor to prevent overheating.
• Деца: Keep the product and its components out of reach of small children.
• Расклопување: Do not attempt to disassemble or modify the ESC or motor. This voids the warranty and can cause damage.

3. Поставување и инсталација

3.1 ESC Connection

Follow these steps to connect the ESC:

1. Моторна врска: Connect the three motor wires (A, B, C) from the ESC to the corresponding motor phases. For sensored motors, connect the sensor cable from the motor to the ESC's sensor port. Ensure the sensor cable is oriented correctly.
2. Поврзување со батерија: Connect the ESC's power input wires (red for positive, black for negative) to your battery pack. Ensure correct polarity.
3. Поврзување на ресиверот: Plug the ESC's throttle cable (usually a three-wire servo connector) into the throttle channel (CH2) of your receiver.
4. Вентилатор за ладење (доколку е применливо): If your ESC includes a cooling fan, connect it to the designated fan port on the ESC.

3.2 Инсталација на мотор

Mount the 3650 SD G2 motor securely in your vehicle's motor mount using appropriate screws. Ensure proper gear mesh between the motor pinion and the spur gear. Incorrect gear mesh can lead to excessive wear and heat.

3.3 Throttle Range Calibration

Before first use, the ESC's throttle range must be calibrated to match your radio transmitter. Refer to the detailed calibration procedure in the separate ESC manual or Hobbywing's official website for your specific ESC model. Generally, this involves:

1. Turn on your transmitter and set throttle trim to neutral.
2. Hold the ESC's SET button, then turn on the ESC. Release the button when the LED flashes.
3. Set full throttle on your transmitter, press SET.
4. Set full brake/reverse on your transmitter, press SET.
5. Set neutral throttle on your transmitter, press SET.

4. Упатства за работа

4.1 Вклучување/исклучување

• За вклучување: Ensure all connections are secure. Turn on your radio transmitter first, then connect the battery to the ESC. Press the ESC's power button.
• За исклучување: Disconnect the battery from the ESC. Then turn off your radio transmitter.

4.2 Програмирање ESC

The QUICRUN WP 10BL120 SD G2 ESC features programmable parameters to fine-tune its performance. These parameters can typically be adjusted using:

• The SET button on the ESC (limited parameters).
• A Hobbywing LED Program Box (recommended for full access to parameters).

Refer to the specific ESC manual for a complete list of programmable items and detailed instructions on how to adjust them.

5. Одржување

Regular maintenance ensures the longevity and optimal performance of your ESC and motor combo:

• Чистење: After each use, especially in dusty or dirty conditions, clean the ESC and motor with a soft brush or compressed air. Remove any debris that may impede cooling.
• Инспекција: Periodically check all wires and connectors for signs of wear, fraying, or corrosion. Ensure all screws are tight.
• Моторни лежишта: Inspect motor bearings for smooth operation. If they feel rough, they may need cleaning or replacement.
• Складирање: Store the ESC and motor in a clean, dry place away from direct sunlight and extreme temperatures. Disconnect batteries when storing.

6 Смена на проблеми

Овој дел се однесува на вообичаени проблеми со кои може да се соочите:

7. Спецификации

Key technical specifications for the Hobbywing QUICRUN WP 10BL120 SD G2 ESC and 3650 SD G2 Motor Combo:

8. Гаранција и поддршка

8.1 Информации за гаранцијата

For detailed warranty terms and conditions, please refer to the official Hobbywing website or contact your local distributor. Warranty coverage typically applies to manufacturing defects and may vary by region.

8.2 Поддршка за корисници

If you encounter issues not covered in this manual or require further assistance, please visit the official Hobbywing support page or contact their customer service department. Provide your product model number (HWI38020382) and a detailed description of the issue for efficient support.