Упатство за користење на Ortur Laser Master 2 S2 1064nm инфрацрвен ласерски гравер

1. Вовед

This manual provides essential information for the safe and effective operation of your Ortur Laser Master 2 S2 1064nm Infrared Laser Engraver. Please read this manual thoroughly before assembly and operation to ensure proper usage and to prevent damage or injury. This device is designed for precise engraving on various materials, including metals, plastics, and acrylics.

Image 1.1: The Ortur Laser Master 2 S2 1064nm Infrared Laser Engraver, showcasing its design and examples of engraved items like cutlery, a flask, and a mug.

2. Информации за безбедност

The Ortur Laser Master 2 S2 is a Class 4 laser product. Improper use can result in serious injury, including eye damage, skin burns, and fire. Always adhere to the following safety guidelines:

• Заштита на очите: Always wear appropriate laser safety goggles designed for the 1064nm wavelength during operation. Never look directly at the laser beam or its reflection.
• Работна област: Operate the engraver in a well-ventilated area. Ensure the work area is free of flammable materials.
• Надзор: Никогаш не оставајте ја машината без надзор за време на работата.
• Безбедност на материјалот: Engrave only approved materials. Some materials can produce hazardous fumes when engraved.
• Итен прекин: Запознајте се со локацијата и функцијата на копчето за итно сопирање.
• Деца и домашни миленици: Чувајте ги децата и миленичињата подалеку од операционата област.
• Напојување: Користете го само дадениот адаптер за напојување.

Слика 2.1: Готовоview of the four main safety features integrated into the Ortur Laser Master 2 S2 design.

3. Производот завршиview

3.1 Компоненти

The Ortur Laser Master 2 S2 consists of a robust frame, a 1064nm infrared laser module, and control electronics. Key components include:

• Ласерски модул: 1000mW (1W) 1064nm Infrared Laser.
• Рамка: Industrial-grade full metal structure for stability and precision.
• Контролен одбор: Manages laser operations and communication.
• Степер мотори: Drive the X and Y axes for precise movement.
• Ограничи прекинувачи: Define the engraving area boundaries.

3.2 Клучни карактеристики

• Multi-Material Compatibility: Capable of engraving various metals (gold, silver, platinum, copper, aluminum, stainless steel), leathers, plastics, acrylics, glass, and stones.
• Висока прецизност: Motion accuracy up to 0.03mm for detailed engravings.
• Голема површина за гравирање: 390 x 410 mm (approximately 15.35" x 16.14").
• Голема брзина: Engraving speeds up to 10000mm/min.
• Компатибилност на софтвер: Supports LaserGRBL and LightBurn.
• Поддршка за оперативен систем: Compatible with Windows 7/8/XP/10/11 and Mac systems (via LightBurn).
• File Поддршка за формат: SVG, DXF, JPG, JPEG, PNG, BMP, TIF, CR2, etc.
• Модуларен дизајн: Facilitates easy assembly, repair, and upgrades.

Image 3.1: The powerful 1064nm 1W infrared laser module with dual fan cooling, designed for long operational life.

Image 3.2: The generous 390 x 410 mm (15.35" x 16.14") engraving area of the OLM2S2.

4. Поставување

4.1 Отпакување и проверка

Carefully unpack all components. Verify that all parts listed in the packing list are present and undamaged. If any parts are missing or damaged, contact customer support immediately.

4.2 Собрание

The Ortur Laser Master 2 S2 features a modular design for straightforward assembly. Typical assembly time is 10-15 minutes. Follow the detailed assembly instructions provided in the separate assembly guide or refer to official Ortur assembly videos. Ensure all connections are secure and the frame is rigid.

• Assemble the frame components according to the diagrams.
• Монтирајте го ласерскиот модул на порталот.
• Connect all cables (power, USB, motor cables) securely.
• Ensure the timing belts are properly tensioned.

4.3 Инсталација на софтвер

Download the latest version of your preferred engraving software (LaserGRBL or LightBurn) from their official websites. Install the software on your computer and follow the on-screen instructions for driver installation and initial setup.

5. Упатства за работа

5.1 Preparing for Engraving

1. Материјал за место: Position the material to be engraved on the work surface.
2. Фокусирајте го ласерот: Adjust the laser module height to achieve the optimal focal point on the material surface. Refer to the laser module's specific focusing instructions.
3. Поврзете се со компјутер: Connect the engraver to your computer via USB.
4. Стартување на софтвер: Open LaserGRBL or LightBurn.
5. Load Design: Import your desired engraving design (SVG, DXF, JPG, etc.).
6. Поставете параметри: Configure engraving parameters such as speed, power, and number of passes based on the material type and desired effect.

5.2 Engraving Process

1. Носете заштитни очила: Ensure all individuals in the vicinity are wearing appropriate laser safety goggles.
2. Започнете со гравирање: Initiate the engraving process through the software.
3. Работа на мониторот: Continuously monitor the engraving process. Be prepared to use the emergency stop if any issues arise.
4. Завршување: Once engraving is complete, the laser will stop. Wait for any fumes to clear before removing the engraved item.

Image 5.1: The Ortur Laser Master 2 S2 is suitable for engraving on various metals, including gold, silver, copper, and titanium.

Слика 5.2: На пр.amples of materials that can be engraved, such as various metals, plastics, and acrylics.

6. Софтверска компатибилност

The Ortur Laser Master 2 S2 is compatible with widely used laser engraving software:

• LaserGRBL: A free, open-source software primarily for Windows users. It is suitable for basic engraving tasks and image processing.
• LightBurn: A powerful, paid software compatible with Windows, Mac, and Linux. It offers advanced features for design, layout, and control, making it suitable for more complex projects.

Ensure your software is updated to the latest version for optimal performance and compatibility.

Image 6.1: The laser engraver adapts to common software like LightBurn and LaserGRBL.

7. Одржување

Редовното одржување обезбедува долготрајност и оптимални перформанси на вашиот ласерски гравер.

• Чистење: Regularly clean the lens of the laser module with a lint-free cloth and isopropyl alcohol. Keep the rails and belts free of dust and debris.
• Подмачкување: Periodically apply a small amount of lubricant to the linear rails to ensure smooth movement.
• Затегнување на ременот: Check and adjust the tension of the timing belts as needed to prevent skipping or inaccurate engraving.
• Ажурирања на фирмверот: Проверете го официјалниот Ортур website for any firmware updates for your machine.

8 Смена на проблеми

Овој дел се однесува на вообичаени проблеми со кои може да се соочите.

9. Спецификации

Image 9.1: The motion accuracy of 0.03mm ensures clear and detailed engraving patterns.

10. Гаранција и поддршка

Ortur is committed to providing high-quality after-sales service. If you encounter any problems with your product, please contact our customer support team.

• Услуга за клиенти: Professional technicians are available to provide solutions and assistance.
• Контакт информации: Погледнете го официјалниот Ортур website or product packaging for current contact methods (email, live chat, Facebook support).

Image 10.1: Ortur offers round-the-clock support via email, live chat, and Facebook.