1. Вовед
The EARU Electric Single Phase Energy Meter (Model EARU-1006) is designed for accurate monitoring of electrical parameters in single-phase 220V, 80A systems. It provides real-time data for voltage (V), current (A), power (W), power factor (PF), frequency (Hz), and kilowatt-hour (kWh) consumption. This device assists in understanding energy usage and identifying potential inefficiencies in your electrical system.
2. Информации за безбедност
- Инсталацијата мора да ја изврши квалификуван електричар во согласност со локалните електрични прописи и прописи.
- Ensure the main power supply is disconnected before installation or maintenance to prevent electric shock.
- Не го користете уредот ако изгледа оштетен.
- This device is designed for indoor use in a dry environment. Avoid exposure to moisture or extreme temperatures.
- The maximum current rating is 80A. Do not exceed this limit.
3. Производот завршиview
The EARU-1006 energy meter features a clear LCD display that shows various electrical parameters simultaneously. It is designed for DIN rail mounting, allowing for easy integration into standard electrical distribution boards.
Слика 1: Предна страна view of the EARU Electric Single Phase Energy Meter, showing the LCD display with various electrical readings.
Слика 2: Детално view of the LCD display, illustrating the layout of voltage, current, power, frequency, power factor, and kWh readings.
4. Содржина на пакетот
Пакетот обично вклучува:
- 1 x EARU Electric Single Phase Energy Meter (Model EARU-1006)
5. Спецификации
Figure 3: Technical data table providing detailed specifications of the energy meter.
| Параметар | Вредност |
|---|---|
| Бренд | ЕАРУ |
| Модел | EARU-1006 |
| Оценето волtage | AC110V/220V (230 Volts) |
| Оценета струја | 80 А |
| Фреквенција | 50/60 Hz |
| Точност на мерење | ±1% / Class 1 |
| Потрошувачка на енергија | <2 W |
| Инсталација | 35мм DIN шина |
| Работна температура | -10°C до +55°C |
| Температура на складирање | -40°C до +70°C |
| Работна влажност | 5% до 95% RH |
| Тип на дисплеј | LCD екран |
| Max kWh Record | 999999 kWh |
| Димензии на производот | 10 x 5 x 10 cm |
| Тежина на ставката | 450 гр |
Figure 4: Dimensional drawing of the energy meter, showing measurements in both millimeters and inches.
6. Поставување и инсталација
Важно: Проверете дали е исклучено целото напојување пред да продолжите со инсталацијата.
- Монтирање: The EARU-1006 is designed for 35mm DIN rail mounting. Snap the meter onto the DIN rail securely within your electrical panel.
- Жици: Refer to the wiring diagram below for correct connection. This is a single-phase, 2-wire direct connection meter.
- Connect the Live (L) input wire to the designated 'L In' terminal.
- Connect the Neutral (N) input wire to the designated 'N In' terminal.
- Connect the Live (L) output wire to the designated 'L Out' terminal.
- Connect the Neutral (N) output wire to the designated 'N Out' terminal.
- Вклучување: Once all connections are secure and verified, restore power to the circuit. The LCD display should illuminate and begin showing readings.
Figure 5: Wiring diagram illustrating the correct connections for the single-phase energy meter.
7. Упатства за работа
The energy meter operates automatically once powered on. The LCD display continuously cycles through or shows multiple parameters simultaneously.
- Reading Parameters: The display shows Voltage (V), Current (A), Power (W), Power Factor (PF), Frequency (Hz), and Kilowatt-hour (kWh).
- kWh Reading: The meter records total kWh consumption. This reading is permanent and accumulates over time.
- kWh Reset: The meter features a manual reset function for the kWh reading. Consult the device's physical buttons or specific instructions on the meter itself for the reset procedure. Typically, a long press on a designated button (if present) will reset the temporary kWh value. The total kWh value is usually non-resettable.
8. Одржување
- Чистење: Use a soft, dry cloth to clean the meter's exterior. Do not use abrasive cleaners or solvents.
- Инспекција: Periodically inspect the wiring connections to ensure they are tight and free from corrosion.
- Животна средина: Осигурајте се дека работната средина останува во рамките на наведените опсези на температура и влажност.
9 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Екранот е празен | Нема напојување; Неправилно поврзување | Check power connections and ensure power is supplied. Verify wiring against the diagram. |
| Неточни читања | Incorrect wiring; Faulty connection | Double-check all wiring connections. Ensure wires are securely fastened. |
| kWh not accumulating | No load connected; Meter malfunction | Ensure there is an active electrical load connected through the meter. If problem persists, contact support. |
10. Гаранција и поддршка
The EARU Electric Single Phase Energy Meter (Model EARU-1006) typically comes with a 1-year warranty from the date of purchase. Please retain your purchase receipt for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the product packaging or manufacturer's webсајт за детали за контакт.
