1. Вовед
This manual provides comprehensive instructions for the safe and effective use of your Genmitsu Kortek 5W Laser Engraver Machine. Please read this manual thoroughly before operating the device to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Image 1.1: The Genmitsu Kortek 5W Laser Engraver Machine, showcasing its compact design and examples of engraved items such as a wooden dog puzzle, a ceramic mug with a floral design, and a denim hat with a logo.
2. Безбедносни упатства
Operating a laser engraver involves potential hazards. Adhere to all safety precautions to prevent injury and damage to the equipment.
- Заштита на очите: Always wear the provided laser safety goggles during operation. Never look directly at the laser beam.
- Вентилација: Operate the machine in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting.
- Компатибилност на материјали: Only engrave or cut materials specified as safe for this device. Avoid highly reflective, flammable, or unknown materials.
- Надзор: Никогаш не оставајте ја машината без надзор за време на работата.
- Итен прекин: Familiarize yourself with the location and function of the emergency stop switch.
- Protective Shield: Ensure the protective laser shield is properly in place during operation.
- Tilt Induction: The machine is equipped with automatic tilt-stop protection. If the machine is tilted during operation, it will automatically stop.
Слика 2.1: Готовоview of the Genmitsu Kortek's integrated safety features, including Class 1 laser certification, automatic tilt detection, a protective orange laser shield, and the inclusion of laser safety goggles.
3. Содржина на пакетот
Проверете дали сите компоненти се присутни при распакувањето:
- Genmitsu Kortek 5W Laser Engraver Machine (pre-assembled frame)
- Ласерски модул од 5W
- Адаптер за напојување
- USB кабел
- Ласерски заштитни очила
- Sample Materials (e.g., plywood pieces, cork coasters)
- Упатство за употреба (овој документ)
4. Поставување
4.1 Отпакување и поставување
- Внимателно отстранете ги сите компоненти од пакувањето.
- Place the engraver on a stable, level, and heat-resistant surface in a well-ventilated area.
4.2 Инсталација на ласерски модул
The main frame of the Kortek engraver comes pre-assembled. Only the laser module needs to be attached.
- Locate the laser module and the mounting screws/mechanism on the gantry.
- Carefully attach the 5W laser module to the gantry, ensuring it is securely fastened.
- Connect the laser module cable to the designated port on the main control board.
4.3 Напојување и поврзување
- Connect the power adapter to the DC 24V port on the machine and then to a power outlet.
- For wired connection, connect the USB cable from the machine (USB Type-B port) to your computer.
- For wireless control, ensure the machine is powered on.
Слика 4.1: Детално view of the control panel and the built-in fixed focus module. The control panel includes ports for USB Type-B and DC 24V power, along with buttons for Offline Engrave and Power. Instructions for the Offline Engrave button are also visible.
5. Упатства за работа
5.1 Software and App Control
The Genmitsu Kortek 5W can be controlled via the Genmitsu APP or compatible desktop software like LightBurn or LaserGRBL.
- Genmitsu APP: Download the official Genmitsu APP from your device's app store. The app supports wireless control via Wi-Fi.
- Desktop Software: For advanced control, use LightBurn or LaserGRBL. These require a USB connection to your computer.
Image 5.1: The Genmitsu Kortek offers broad compatibility, supporting Windows, Android, Mac OS, and iOS operating systems. It integrates with software like LightBurn and LaserGRBL, and can be controlled via the Genmitsu APP, Wi-Fi, USB, or TF card.
5.2 Wireless APP Connection
- Power on the Kortek engraver.
- On your phone or laptop, connect to the Wi-Fi network named "Genmitsu-Kortek".
- Open the Genmitsu APP. Ensure your device and the engraver are on the same Wi-Fi network.
- Користете ја апликацијата за претходноview, position, and initiate engraving tasks.
Image 5.2: The Genmitsu APP allows for wireless control, enabling users to preview designs, adjust positioning, and initiate engraving directly from their smartphone or laptop.
5.3 Focusing the Laser
The Kortek 5W features a built-in fixed focus module for quick and easy focusing. Refer to the laser module's specific instructions for fine-tuning if necessary.
5.4 Процес на гравирање и сечење
- Place the material to be engraved or cut on the working area (200x150 mm).
- Load your design into the Genmitsu APP or desktop software.
- Adjust laser power and speed settings according to the material type and desired effect. (Refer to material settings guidelines, often available in software or online resources).
- Initiate the engraving/cutting process. Monitor the machine closely.
Image 5.3: The working area of the Genmitsu Kortek measures 200mm by 150mm, suitable for various small to medium-sized projects.
5.5 Material Capabilities (5W Laser Module)
The 5W laser module offers a balance of detail and cutting capability.
- Гравирање: Wood, Opaque acrylic, felt, frosted glass, ceramic, stainless steel, leather, paper, cork, cardstock.
- Сечење: Wood (up to 7mm pine in one pass), Opaque acrylic, felt, leather.
Image 5.4: The 5W laser module is capable of cutting through 7mm thick pine wood in a single pass, demonstrating its cutting power.
Image 5.5: This table compares the capabilities of 2.5W, 5W, and 10W laser modules. The 5W module offers moderate engraving speed, can cut wood/acrylic up to 5mm, works with materials like wood, acrylic, plastic, leather, and coated metals, produces a medium depth and richer texture, and is suitable for light cutting and deep engraving.
6. Одржување
Редовното одржување обезбедува оптимални перформанси и го продолжува животниот век на вашиот ласерски гравер.
- Чистење на објективот: Периодично чистете ја ласерската леќа со мека крпа што не остава влакненца и раствор за чистење на леќи за да го одржите квалитетот на ласерскиот зрак.
- Чистење на машината: Use a soft brush or compressed air to remove dust and debris from the machine, especially from the rails and moving parts.
- Подмачкување: Apply a small amount of lubricant to the guide rails as recommended by the manufacturer to ensure smooth movement.
- Ажурирања на фирмверот: Check the Genmitsu website or app for any available firmware updates to improve performance and add features.
7 Смена на проблеми
Овој дел се однесува на вообичаени проблеми со кои може да се соочите.
| Проблем | Можна причина | Решение |
|---|---|---|
| Ласерот не пука или излезот е слаб. | Dirty lens, incorrect focus, low power setting, loose cable. | Clean the laser lens. Adjust focus. Increase laser power in software. Check all cable connections. |
| Engraving is blurry or inaccurate. | Incorrect focus, loose belts/components, material movement, high speed. | Adjust focus. Check and tighten belts. Secure material. Reduce engraving speed. |
| Machine not connecting to app/software. | Wi-Fi/USB connection issue, incorrect driver, firewall. | Ensure Wi-Fi is connected to "Genmitsu-Kortek". Check USB cable. Install correct drivers. Temporarily disable firewall. |
| Машината неочекувано запира. | Tilt induction triggered, emergency stop pressed, power interruption. | Ensure machine is on a stable surface. Check emergency stop button. Verify power supply. |
8. Спецификации
| Карактеристика | Детал |
|---|---|
| Модел | Kortek 5W |
| Ласерска моќност | 5W |
| Работна област | 200 x 150 mm (7.9 x 5.9 инчи) |
| Повторливост | ± 0.01 мм |
| Тип на мотор | 35mm Stepper Motors |
| Поврзување | Wi-Fi (Genmitsu APP), USB, TF Card |
| Поддржан ОС | Windows, Android, Mac OS, iOS |
| Поддржан софтвер | Genmitsu APP, LightBurn, LaserGRBL |
| Безбедносни карактеристики | Class 1 Laser Certification, Automatic Tilt-Stop Protection, Emergency Safety Switch, Protective Laser Shield, Laser Goggles |
| Тежина на ставката | 1.2 кг (2.65 фунти) |
| Димензии на производот | 14.57 x 12.99 x 7.48 инчи |
| Производител | Генмитсу |
Image 8.1: The 35mm stepper motors ensure ±0.01mm repeatability, contributing to ultra-precise engraving results, as demonstrated by the detailed cork coasters.
Image 8.2: The Genmitsu Kortek is lightweight, weighing only 1.2 kg (2.65 lbs), making it highly portable.
9. Информации за гаранцијата
The Genmitsu Kortek 5W Laser Engraver Machine comes with a 1-годишна гаранција за квалитет од датумот на купување. Оваа гаранција ги покрива производствените дефекти и неисправностите при нормална употреба. Не ги покрива штетите предизвикани од злоупотреба, несреќи, неовластени модификации или неправилно одржување.
For warranty claims, please contact Genmitsu customer support with your proof of purchase.
10. Customer Support and Resources
For further assistance, technical support, or to explore additional accessories, please refer to the following resources:
- Official Genmitsu Webсајт: Посетете го Genmitsu Store on Amazon за информации за производот, често поставувани прашања и контакт информации за поддршка.
- Онлајн заедница: Join online forums or communities dedicated to Genmitsu products for tips, tricks, and user-shared projects.
- Изборни додатоци: Enhance your engraving capabilities with accessories such as the 1W infrared laser head, rotary roller, honeycomb bed, and air assist pump.
Image 10.1: The Genmitsu Kortek supports a complete accessory ecosystem, including the MDI3 Smoke Purifier and a Rotary Roller Kit, to expand its functionality.
Rotary Roller Kit
Honeycomb Bed
Пумпа за помош на воздухот
1W Infrared Laser Head