POWTREE 7000mAh 25.2V Replacement Battery for Dyson V10 SV12 Series Vacuum Cleaner Instruction Manual

1. Вовед

This manual provides essential instructions for the safe and effective use, installation, and maintenance of your POWTREE 7000mAh 25.2V Li-ion replacement battery for Dyson V10 and SV12 series vacuum cleaners. Please read this manual thoroughly before installation and use.

2. Информации за безбедност

• Не расклопувајте, кршете или дупнувајте ја батеријата.
• Avoid exposing the battery to high temperatures (above 60°C/140°F) or direct sunlight.
• Не поврзувајте ги приклучоците на батеријата.
• Чувајте ја батеријата подалеку од вода или други течности.
• Чувајте ја батеријата на ладно и суво место кога не ја користите.
• Отстранете ги искористените батерии според локалните прописи. Не фрлајте ги со домашен отпад.
• Use only the original Dyson charger or a compatible charger designed for V10/SV12 batteries.
• If the battery shows signs of damage, overheating, or leakage, discontinue use immediately.

Image: The POWTREE V10 replacement battery features multiple safety protections, including overcharge, overvoltage, short circuit, and overcurrent protection, indicated by CE, FC, and RoHS certifications.

3. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• 1 x POWTREE 7000mAh 25.2V Replacement Battery
• 1 x шрафцигер
• 3 x завртки
• 1 x Post Filter
• 1 x Battery Protection Cap

Image: The complete package includes the replacement battery, a screwdriver, three screws, a post filter, and a battery protection cap for a comprehensive replacement solution.

4. Инструкции за инсталација

Follow these steps to replace the battery in your Dyson V10 or SV12 series vacuum cleaner:

1. Исклучено: Ensure your Dyson vacuum cleaner is turned off and unplugged from any charging source.
2. Лоцирајте ја батеријата: The battery is typically located at the bottom of the main unit handle.
3. Отстранете ги завртките: Use the provided screwdriver to remove the screws securing the old battery. There are usually two screws: one near the charging port and another behind the pull-out washable filter.
4. Detach Old Battery: Carefully slide the old battery out of its housing.
5. Инсталирајте нова батерија: Align the POWTREE replacement battery with the vacuum cleaner's battery slot. Ensure the connectors are properly seated.
6. Обезбедете нова батерија: Use the provided new screws to fasten the replacement battery securely into place. Do not overtighten.
7. Install Post Filter: If replacing the post filter, remove the old filter by twisting it counter-clockwise and then insert the new filter, twisting clockwise to secure it.
8. Почетна наплата: Препорачливо е целосно да ја наполните новата батерија пред нејзината прва употреба.

Image: This diagram illustrates the components included in the package, which are essential for the battery replacement process.

Image: Visual guide demonstrating the simple steps to install and clean the included post filter, ensuring optimal vacuum performance.

5. Упатства за работа

5.1 Полнење на батеријата

• The POWTREE replacement battery is designed to be compatible with your original Dyson V10/SV12 charger and charging stand.
• Connect the vacuum cleaner to its charging station or directly to the charger.
• The LED indicators on the battery will illuminate to show the charging status. A full charge is indicated when all LEDs are solid.
• Avoid leaving the battery on the charger for extended periods after it is fully charged to prolong its lifespan.

5.2 Индикатори за батеријата

The battery features LED indicators to display the remaining charge level and charging status. Refer to your Dyson vacuum cleaner's original manual for specific indicator patterns, as they typically reflect the battery status.

Слика: Детална view of the battery's design, highlighting the charging port, LED indicators for charge status, and the control button.

6. Одржување

6.1 Грижа за батерии

• For optimal performance, fully charge the battery before each use.
• If the vacuum cleaner will not be used for an extended period, store the battery at approximately 50% charge in a cool, dry place.
• Избегнувајте често целосно празнење на батеријата, бидејќи тоа може да го скрати нејзиниот целокупен век на траење.

6.2 Одржување на филтерот

The included post filter is washable and reusable. Regular cleaning of the filter is crucial for maintaining optimal suction power and battery efficiency.

1. Отстрани филтер: Twist the post filter counter-clockwise to detach it from the vacuum cleaner.
2. Измијте: Исплакнете го филтерот под млаз ладна вода додека водата не стане бистра. Не користете детергенти.
3. Сува: Allow the filter to air dry completely for at least 24 hours before reinserting it. Ensure it is thoroughly dry to prevent damage to the motor.
4. Повторно инсталирај: Once dry, reinsert the filter by twisting it clockwise until secure.

7 Смена на проблеми

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact POWTREE customer support for assistance.

8. Спецификации

Image: Key product parameters are displayed, confirming the battery type as Li-ion, voltage at 25.2V, and a capacity of 7000mAh.

Image: This visual confirms the battery's compatibility with Dyson V10 and SV12 series vacuum cleaners, including models like V10 Animal, V10 Absolute, and V10 Motorhead.

9. Гаранција и поддршка

POWTREE provides a 12-месечна гаранција for this V10 replacement battery. For any questions, concerns, or technical assistance, please contact our professional customer support team. We offer 24-hour online support to ensure your satisfaction.

For support, please refer to the contact information provided with your purchase or visit the official POWTREE store on Amazon.