1. Вовед
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.
Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).
2. Поставување
Follow these steps to set up your RGBlink NDI PTZ Camera Controller.
2.1 Распакување и почетна инспекција
- Внимателно отстранете ги сите компоненти од пакувањето.
- Проверете дали се присутни сите предмети наведени во списокот за пакување.
- Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.
2.2 Поврзување на контролорот
The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.
- Напојување преку етернет (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
- Надворешен адаптер за напојување: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
- Врски со камера:
- Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
- Сериска контрола: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.
Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.
Слика 2.2: На пр.ample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.
Image 2.3: Diagram illustrating IP camera connections via a network switch.
2.3 Конфигурација на мрежата
For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.
- Access the controller's web интерфејс со внесување на нејзината IP адреса во a web browser. (Refer to the device's display or network tools to find the IP address).
- The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
- Во рамките на web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.
Image 2.4: NDI|HX camera search and control interface on the controller.
3. Операција
This section details the operational functions of the RGBlink NDI PTZ Camera Controller.
3.1 Надview на контроли
The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.
Image 3.1: The controller's 3.49-inch LCD display.
Слика 3.2: Детално view of the 3D joystick and multi-function knobs.
Image 3.3: Layout of the controller's buttons and numeric keypad area.
3.2 Избор на камера
- Копчиња за брз избор: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
- Нумеричка тастатура: For cameras beyond the quick select buttons (up to 255), press the ИД на КАМЕР button, then enter the camera number using the numeric keypad, and press ENTER.
Image 3.4: The controller's ability to manage multiple cameras.
3.3 Контрола на PTZ
- Jојстик: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
- PT Копче за брзина: Adjusts the gimbal movement speed for pan and tilt.
- Zoom Knob: Provides precise zoom control, especially useful in preview режим.
3.4 Image Parameter Adjustment
- IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
- R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
- FOCUS Button: Притиснете го АВТОМАТСКИ ФОКУС button to switch the camera to auto focus mode.
- EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
- BACKLIGHT Button: Toggles the camera's backlight mode.
- WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
- ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.
Image 3.5: Functions of buttons and knobs on the left side of the controller.
Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.
3.5 мемории
- SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press ENTER да заштедите. Притиснете ESC да излезете.
- CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press ENTER to recall. Press ESC да излезете.
- The controller supports saving and recalling up to 255 presets per camera.
3.6 Навигација на мени
- Копче MENU: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), ENTER confirms selections, and ESC acts as a back button.
4. Одржување
Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.
4.1 Чистење
- Use a soft, dry cloth to clean the exterior of the controller.
- За тврдокорна нечистотија, малку дampИзмијте ја крпата со вода или со благ, неабразивен раствор за чистење.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
- Ensure no liquids enter the device through openings or ports.
4.2 Складирање
- Кога не го користите подолг период, чувајте го контролерот на ладно и суво место, подалеку од директна сончева светлина и екстремни температури.
- Заштитете го уредот од прашина и влага.
5 Смена на проблеми
Овој дел нуди решенија за вообичаени проблеми со кои може да се соочите.
5.1 Нема струја
- Проверете го изворот на енергија: Ensure the power adapter is securely connected to both the controller and a working power outlet.
- PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
- Интегритет на кабелот: Inspect the power cable and Ethernet cable for any damage.
5.2 Cannot Control Camera
- Мрежно поврзување: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
- Несовпаѓање на протоколот: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
- ID на камера: Ensure the correct camera ID is selected on the controller.
- Ингеренциите за најавување: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web интерфејс.
- Сериска врска: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
- Фирмвер: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webстраница за ажурирања.
5.3 Проблеми со LCD екранот
- Нема приказ: Осигурајте се дека контролерот е вклучен.
- Затемнет екран: Check if there are any brightness settings on the controller that can be adjusted.
6. Спецификации
| Карактеристика | Детал |
|---|---|
| Модел | RGBBKT |
| Димензии (Д x Ш x В) | 11.4 x 7.8 x 5.9 инчи (приближно 290 x 200 x 150 мм) |
| Тежина | 2.2 фунти (приближно 1 кг) |
| Приказ | 3.49" LCD екран |
| Контролни протоколи | VISCA over IP, ONVIF v2.42, NDI v5.5, Pelco-D/P |
| Интерфејси | RS232, RS422, RS485, RJ45 Ethernet (PoE) |
| Camera Capacity | Up to 255 PTZ cameras |
| Влез на енергија | PoE or DC 12V (external adapter) |
| Џојстик | High-precision Hall sensor 3D joystick |
Image 6.1: Controller dimensions and typical usage environments.
Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.
7. Видео демонстрација на производот
Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.
Video 7.1: Official demonstration of the RGBlink PTZ Camera Controller Joystick, showcasing multi-camera control and key features.
8. Гаранција и поддршка
For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official webсајт.
- Производител: Xiamen RGBlink Science & Technology Co.,Ltd.
- Службен Webсајт: www.rgblink.com (Забелешка: Ова е резервирано место URL, ве молиме погледнете го пакувањето на вашиот производ или официјалната документација за соодветна поддршка webсајт.)
- Контакт информации: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.
