Reloop RP-7 Professional 7-inch Turntable System User Manual

Вовед

Thank you for choosing the Reloop RP-7 Professional 7-inch Turntable System. This manual provides essential information for the safe and efficient use of your new turntable. Please read these instructions carefully before operating the device and retain them for future reference. The Reloop RP-7 is designed for both casual listeners of 7-inch vinyl and professional DJs, offering high-quality performance and precision for 45s culture.

Инструкции за безбедност

• Напојување: Connect the turntable only to an AC outlet with the specified voltage (230 Volts). Ensure the power cord is not damaged or pinched.
• Вода и влага: Не го изложувајте уредот на дожд, влага или прекумерна влажност. Не ставајте предмети полни со течности, како што се вазни, врз уредот.
• Вентилација: Обезбедете соодветна вентилација околу уредот. Не ги блокирајте отворите за вентилација.
• Извори на топлина: Држете го уредот подалеку од извори на топлина како што се радијатори, грејни тела, шпорети или други апарати (вклучувајќи ampлајфикатори) кои произведуваат топлина.
• Чистење: Исклучете го кабелот за напојување пред чистење. Користете само сува крпа.
• Сервисирање: Не обидувајте се сами да го сервисирате овој производ. Пренесете ги сите сервиси на квалификуван сервисен персонал.
• Поставување: Place the turntable on a stable, level surface to prevent vibrations and ensure proper operation.

Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• Reloop RP-7 Professional 7-inch Turntable System
• RCA кабел
• Кабел за напојување
• Слипмат
• Противтежа
• Headshell with cartridge (may vary by region/package)
• Упатство за употреба (овој документ)

Производот завршиview

The Reloop RP-7 is a professional 7-inch direct-drive DJ turntable system, specifically designed for 45s vinyl enthusiasts and DJs. It combines robust construction with advanced features for precise playback and scratching.

Предна страна view of the Reloop RP-7 Professional 7-inch Turntable System, showcasing the platter, tonearm, and controls.

Клучни карактеристики:

• High-Torque Direct-Drive Motor: Newly developed brushless DC motor with 2.5 kg/cm torque for reliable vinyl cueing and advanced scratching techniques.
• Precision Platter: Precision-machined, die-cast aluminum platter with finely tuned motor characteristics to minimize wow and flutter.
• Straight Copper Tonearm: Features internal rubber damping for superior vinyl tracking and minimal resonance.
• Height-Adjustable VTA Tonearm Base: Adapted from the RP-7000/8000 series for optimal tracking.
• Statically-Balanced Tonearm System: With hydraulic lift, eliminating the need for anti-skating.
• Universal Cartridge System Connection: Compatible with SME and headshell cartridges.
• Adjustable Tempo Range: ±8%, ±16%, or ±35% with a reset button.
• Повеќекратни брзини на репродукција: Supports 33 1/3, 45, and 78 RPM.
• Одвојлива LED светилка: Freely rotatable aluminum LED light for clear visibility in low-light conditions.
• Recessed Connection Terminal: Offers flush integration into a DJ setup with reliable protection for sensitive ports.
• Switchable Phono/Line Outputs: Gold-plated connectors prevent reliance on dedicated phono inputs.

The RP-7 features a newly developed brushless DC motor providing 2.5 kg/cm of torque for powerful and precise performance.

Key technical features of the Reloop RP-7, including pitch ranges, speeds, VTA tonearm, low-noise power supply, and SME cartridge connection.

Поставување

1. Отпакување и поставување:

• Внимателно отстранете ги сите компоненти од пакувањето.
• Place the turntable on a flat, stable, and vibration-free surface.

2. Platter Installation:

• Gently place the aluminum platter onto the spindle.
• Ставете ја подлогата за лизгање на врвот од чинијата.

3. Tonearm and Cartridge Setup:

• Attach your preferred headshell with cartridge to the tonearm.
• Mount the counterweight onto the rear of the tonearm and adjust it to achieve proper tracking force for your cartridge. Refer to your cartridge manufacturer's recommendations for specific tracking force.
• Adjust the Vertical Tracking Angle (VTA) using the height-adjustable tonearm base to ensure the tonearm is parallel to the record surface.

4. Connecting to Audio System:

• Connect the supplied RCA cable from the turntable's output to your mixer or ampживописен.
• The RP-7 features switchable phono/line outputs. Ensure the switch on the rear of the turntable is set correctly (PHONO for phono inputs, LINE for line inputs).
• Connect the ground wire from the turntable to the ground terminal on your mixer or ampразладувач за минимизирање на зуењето.

Заден дел view of the Reloop RP-7, illustrating the recessed RCA and power connection terminals.

5. Поврзување за напојување:

• Connect the power cable to the turntable and then to a suitable 230V AC power outlet.

Упатства за работа

1. Вклучување/исклучување:

• Turn the power knob clockwise to power on the unit. The LED will illuminate.
• Turn the power knob counter-clockwise to power off the unit.

2. Selecting Playback Speed:

• Притиснете го 33, 45, или 78 RPM buttons to select the desired playback speed for your vinyl record. The corresponding LED will light up.

3. Starting/Stopping Playback:

• Ставете запис на чинија.
• Притиснете го СТАРТ/СТОП копчето за да започнете со ротација на чинијата.
• Lift the tonearm using the cue lever, position it over the desired track, and gently lower it onto the record.
• To stop, lift the tonearm, return it to the tonearm rest, and press the СТАРТ/СТОП копче.

4. Pitch Adjustment:

• Use the pitch fader to adjust the playback speed within ±8%, ±16%, or ±35% ranges.
• Притиснете го РЕСЕТИРАЈ button to instantly return the platter speed to 0% pitch adjustment.

5. Користење на LED светло:

• Insert the detachable aluminum LED light into its designated port for improved visibility of the vinyl, especially in dimly lit environments.

The Reloop RP-7 provides excellent tracking accuracy and minimal resonances, crucial for both listening and DJ performance.

Одржување

1. Cleaning the Unit:

• Секогаш исклучувајте го напојувањето пред чистење.
• Use a soft, dry cloth to wipe the surface of the turntable. Do not use abrasive cleaners, waxes, or solvents.
• За послужавникот, користете малку дamp крпа доколку е потребно, а потоа темелно исушете.

2. Грижа за пенкалото:

• Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front.
• Replace the stylus when it shows signs of wear (typically after 500-1000 hours of playback) to prevent damage to your records.

3. Record Care:

• Keep your records clean and free of dust. Use a carbon fiber brush before each play.
• Чувајте ги плочите вертикално во нивните обвивки за да спречите искривување.

Решавање проблеми

If you encounter issues with your Reloop RP-7, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Reloop customer support.

Спецификации

Гаранција и поддршка

Reloop products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Reloop website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Reloop customer service through their official channels.

Можете да најдете повеќе информации и ресурси за поддршка на Reloop Store on Amazon or the official Reloop webсајт.